您的位置:汉字大全 > 行业英语 > 冶金 > sessile dislocation是什么意思

sessile dislocation是什么意思

中文翻译不滑动位错

网络释义

1)sessile dislocation,不滑动位错2)glissile dislocation,滑动位错3)immobile dislocation,不可移动的位错4)dislocation slip,位错滑移5)dislocation sliding,位错滑移6)Dislocation creep,位错滑移

用法例句

    The experimental results show that strain rate doesn't affect the fracture mechanism of intragranular dimple and mainly dislocation slipping;the tensile strength is increased slightly along with the increase of strain rate,however,the elongation doesn't decrease in general which is decreased firstly and raised later with the increase of strain rate,the high s.

    结果表明,应变速率对10Ni5CrMoV钢的断裂方式没有影响,拉伸试样均为塑性断裂,断裂微观机制主要是位错滑移;抗拉强度随应变速率增加而略有增加;伸长率随应变速率的增加先下降后上升,但总体无降低;高应变速率并未造成该钢的脆化。

    Through the analyses of the X-ray diffraction data and the corresponding crystallography, it was found that during the first pass of ECAP, the main deformation mode of α phase is {1011}(1012} twinning, while during the following passes the main deformation mode is dislocation slip.

    α相在第1道次ECAP过程中主要的变形方式是{1011}〈1012〉孪生,在随后道次的ECAP过程中主要变形方式为位错滑移,变形方式的转变主要是由于ECAP造成的组织细化效应;对于β相,各道次ECAP的主要变形方式均为位错滑移。

    Twinning and dislocation slip have been proven to be the dominant model of plastic deformation when the temperature is bel.

    当温度在动态再结晶温度以下时,材料的塑性变形主要是:孪生、位错滑移。

    In the process of superplastic deformation, the dislocation sliding has important cordinating effect, so that the grain boundary sliding proceeds easily.

    合金在超塑变形中,位错滑移起重要协调作用,使晶界滑动易于进行。

    It is of no significance that gold is transported from the inside of pyrite in which gold atoms diffuse via defects such as dislocations if there is no dislocation sliding in the pyrite.

    分析了高温高压高应变速率条件下黄铁矿中的晶格金迁移的动力学机制后认为 :黄铁矿晶格中的金原子趋向于向位错等缺陷处扩散 ;在无位错滑移的情况下 ,晶格金原子在位错线等缺陷中扩散的扩散方式对其从黄铁矿内部迁移出来无实际意义 ;在高温高压高应变速率 [( 1 0 - 8~ 1 0 - 4) /s]条件下黄铁矿变形以位错滑移为主 ,金原子伴随着位错滑移一起迁移 ,最终迁移进入裂隙 ,增加了与成矿流体接触的机会。

    25, respectively, GBS and dislocation creep appeared to dominate the deformation process, consistent with the SEM examination.

    25)则对应于位错滑移机制。

    Study of Fracture Behavior in Aluminum Alloys Based on Dislocation Slip;

    基于位错滑移的铝合金断裂行为的研究

    The slip behavior of screw and edge dislocations on the inclined-intersecting {110} planes is discussed.

    本文讨论了在斜交{110)滑移面上螺位错和刃位错的滑移行为。

    Distribution Parameters of Dislocation Link Length Related with Various Slip Area and the Fraction of Mobile Dislocation Density

    位错链长分布参数与可动位错密度分量及滑移面积的关系

    Dislocation structures in fatigued Cu single crystals with a special single-slip orientation

    一个特殊单滑移取向铜单晶疲劳位错结构研究

    slipping of upper femoral epiphysis

    股骨上端骨骺滑脱移位

    SLIP DISPLACEMENT AND ITS RATE ABOUT ZEMUHE FAULTS

    则木河断裂带的走滑位移及滑动速率

    ON THE KINETIC IDENTITY OF THE DIP-SLIP FAULT SLIPPING FRACTURE AND EDGE DISLOCATION

    倾滑断裂、滑开破裂和刃型位错运动的一致性

    A slider control on one side of the Pan and Zoom window

    位于“平移和缩放”窗口一侧的滑动控件

    STUDY OF FRICTIONAL STICK SLIP BY CONTROLLING COMBINATION OF FORCE AND DISPLACEMENT

    用力和位移组合控制研究摩擦粘-滑

    Refined Newmark sliding method based on average yielding acceleration

    平均屈服加速度的Newmark滑块位移法

    Application of Gauss-Newton-ANN Algorithm in Prediction of Landslides Displacement

    Gauss-Newton-ANN算法在滑坡位移预测中的应用

    Analysis on monitoring of deep displacement in Mayanpo potential landslide

    马延坡滑坡体深部位移监测成果分析

    Interface Slips in SRC Simple Beams Under Uniformly Distributed Loads

    均布荷载下型钢混凝土简支梁的滑移位移计算

    The soil around pile displacement calculation with elastic theory method considering pile soil slip

    考虑桩土滑移的弹性理论法计算桩周土体位移

    Grain boundary sliding in compressed olivine aggregates.

    橄榄石集合体中与位错蠕变相伴随的粒间滑动

    translation gliding

    平移滑动, 直移滑动

    Sudden rupture and displacement occurs with normal, reverse, strike-slip, or oblique-slip faulting.

    突然破裂和位移伴随正、逆、走向滑动或斜向滑动断层作用而发生。

    The formation of twin structure depends on the slip of stacking fault for nucleating and extending.

    孪晶结构的形成依靠堆垛层错的滑移运动而形核和扩展.

Copyright © 2022-2024 汉字大全www.hanzidaquan.com All Rights Reserved 浙ICP备20019715号