The impact wear behavior of AZ91D magnesium alloys in de-ionized water;
AZ91D镁合金在水介质下的冲击磨损特性研究
Study on Impact Wear Properties of Composite Layer with Tungsten and Chromium;
钨铬复合铸渗层的冲击磨损性能研究
TiC_p Interfacial structure and impact wear resistance of TiC p/Ni coating by laser cladding;
激光熔覆涂层中TiC_p界面结构与涂层冲击磨损性能
The impact abrasion performance of martensite steel was studied.
对马氏体细晶粒高强度钢的冲击磨损性能进行了研究。
The impact abrasion properties of CrMnMo martensitic liner board steel and CrNiMo martensitic liner board steel were tested with MLDF-10 wear tester in acid-ironstone slurry.
采用MLDF-10冲击腐蚀磨损试验机研究了CrMnMo马氏体衬板钢和CrNiMo马氏体衬板钢在铁矿石酸性矿浆中的冲击磨损特性。
The impact abrasion tests were performed,and both hardness and wear loss of the samples were compared with classical surfacing electrode D256.
经过对制备的试样分别进行多次冲击磨损试验,并与D256焊条进行对比试验,分析试样的硬度和磨损失重变化,结果表明,此种堆焊材料具有焊接工艺性好、堆焊层组织加工硬化率高和耐凿削式冲击磨损性能优异的特点。
Research and application of autogenous impacting grinder;
自磨式冲击磨的研究与应用
Research on new style anti-impacting fan-shaped nozzle
新型抗冲击磨损扇形喷嘴的设计研究
An Investigation of Impact Wear and Wear Mechanism of TC4 Alloy
TC4合金冲击磨损性能与机制的研究
Study on martensite transformation in impact-abrasive surface of ZGMn8CrMo cast steel
ZGMn8CrMo铸钢冲击磨损表层马氏体相变研究
Research on Casting Penetration Formation Technology and Impact Wear Resistance of Cast-Infil Tration Layer on the Cast Steel;
钢基铸渗成形技术与渗层冲击磨损特性研究
Investigation on Penetration Process and Impact Wear Properyies of Sursafe Composites;
铸渗工艺及表面复合层冲击磨损性能研究
Corrosion behaviors of chrome steel during impact and abrasion in simulative mineral slurry
铬钢在模拟矿浆中受冲击磨损时的腐蚀行为
An impact abrasion tester based on mechanical change of fibers
基于力学性能变化的纤维冲击磨损测试仪
Test study of collision wear of reinforced concrete structure
钢筋混凝土结构冲击磨损问题试验研究
The Influence of Impact Energy and Impact Angle on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
冲击功、冲击角对湿磨衬板钢冲击腐蚀磨损机理影响
Impact Abrasive Wear Resistance of New Type Martensitic Wear Resistant Steel
新型马氏体耐磨钢的冲击磨料磨损性能
IMPACT-SLIDING WEAR OF MATERIALS
冲击滑动耦合作用下的材料磨损(英文)
Research of the Influence of Component、Microstructure and Impact Energy on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
成分、组织及冲击功对湿磨衬板用钢冲击腐蚀磨损机理影响的研究
Impact Fatigue Resistance and Abrasiveness of Cross Rolled Medium Chromium Semi Steel for Grinding Ball
斜轧中铬半钢磨球的冲击疲劳和磨损性
Research of hardfacing material of impact wear-resistance with Fe-Mn-Cr-Mo-V alloy system
Fe-Mn-Cr-Mo-V系抗冲击磨料磨损堆焊材料的研制
A Study on Impact Abrasive Wear Resistance and Wear Mechanism of Fe-B-C Alloys
Fe-B-C合金冲击磨料磨损性能及磨损机制的研究
A Study on Impact Abrasive Wear Resistance and Wear Mechanism of New-Style Martensitic Steel
新型马氏体钢冲击磨料磨损性能及磨损机制的研究
Study on Impact Corrosion and Abrasion Mechanism of Low Carbon Alloy Steel for Liner Under Different Impact Energy
不同冲击功下衬板用低碳合金钢冲击腐蚀磨损机理的研究
Study on the Performance of Wear and Impact of Al_2O_3 Ceramic Thermal Spraying Coating;
Al_2O_3陶瓷热喷涂涂层磨损及冲击性能研究
