The rheology property and embrittlement rupture temperature of the production were studied.
以再生丁基橡胶为主体材料研制密封胶条,通过正交试验方法安排实验,考察产品的流变性能和脆化断裂温度,讨论不同原料对产品性能影响的主次关系,选定最优配方。
The critical embrittlement temperature of hydrogenation reactor steel after service for 5 or 12 years is 526℃ and 505℃,respectively.
随着脆化度的增加,等脆化曲线向着低温长时间方向移动,并且具有一临界脆化温度与之对应,高于此温度的后续热处理为脱脆过程,反之为脆化过程。
The minimum brittleness temperature of the ACM filled with DOP was -38 and which filled with DBS was -42.
并用IR、1H-NMR表征了共聚物的结构;DMTA测定共聚物的玻璃化转变温度(Tg);填充邻苯二甲酸二辛酯(DOP)的丙烯酸酯橡胶的最低脆性温度达-38℃;填充癸二酸二丁酯(DBS)的丙烯酸酯橡胶的最低脆性温度达-42℃。
test method for brittleness temperature of plastics and elastomers by impact
塑料及弹性体冲击脆化温度试验方法
Test method for brittleness temperature of plastics by impact
GB/T5470-1985塑料冲击脆化温度试验方法
testing method for brittleness temperature of plastics and vulcanized elastomers by low temperature impact
硫化橡胶和塑料的低温冲击脆化温度试验方法
Effect of Brittle Temperature on Micro Powder Removal Ratio of Reclaimed Green Sand
脆化温度对粘土再生砂微粉去除率的影响
However, embrittlement occurs in some metals at elevated temperatures and pressures.
但是，当温度和压力升高时，某些金属会脆化。
ductile-brittle transition temperature
韧性－脆性转变温度
embrittlement temperature
延性 脆性转变温度
Study on comparison between vulnerabilization and vulnerable degree of environment over northernand southern to Qinling Mount;
秦岭南北地区环境脆弱化与脆弱度比较研究
A Discussion on Structural Steel Brittleness Induced by Temperature and Loading Rate and Fracture Controlment;
温度和载荷速率影响结构钢脆性的本质探讨及脆断控制
During the air pressure test, the test temperature shall be higher than the brittle transition temperature of the metal material.
气体压力的试验时，试验温度必须高于金属材料的脆性转变温度。
Thermometer gives indication of changes in temperature.
温度计显示温度的变化。
" Rubber, vulcanized--Determination of low-temperature brittleness(single test piece method)"
GB/T1682-1994硫化橡胶低温脆性的测定单试样法
" Rubber, vulcanized--Determination of low-temperature brittleness(multiple test piece method)"
GB/T15256-1994硫化橡胶低温脆性的测定(多试样法)
The Effect Factors and Brittleness of γ-type TiAl intermetallics Compound at Room Temperature;
γ-TiAl金属间化合物室温脆性及其影响因素
Brittleness Analysis of Cr5Mo Face the Hydrogen High-temperature Heterogeneity Joints of the Processing Pipeline
Cr5Mo临氢高温工艺管道异质接头脆化机理分析
chemical tendering
化学脆化,化学脆损
time-temperature-transformation diagram
时(间)温(度)变化图
This hard and brittle magnet has the features of powerful magnetism, good temperature stability, good resistance to demagnetization, good corrosion resistance.
其材质特点是硬而脆，磁性较强，温度稳定性好，不易退磁，耐腐蚀性好。
