Pass to longitudinal shearing strip the blemish's reason analysis, bring up to longitudinal shearing equipments improve is with the perfect measure, from but dissolved the blemish of the longitudinal shearing strip, and further increased the quality of the longitudinal shearing strip.
通过对纵剪带钢缺陷的原因分析,提出了对纵剪设备改进和完善的措施,从而消除了纵剪带钢的缺陷,进一步提高了纵剪带钢的质量。
Based on the theoretical analysis of the distortion characteristic of steel shear wall with slits,the formula of initial lateral stiffness and how to get the formula is described.
介绍自由侧边时带缝钢板剪力墙初始抗侧刚度的推导过程和理论根据,提出了缝宽剪切刚度减小系数,并对墙板进入塑性后的刚度退化进行理论探讨;对带缝钢板剪力墙平面外失稳和抗剪极限承载力这两种极限状态进行分析;通过有限元分析,指出竖向荷载、开缝参数等对四边固定带缝钢板剪力墙弹性屈曲临界力的影响,提出提高带缝钢板剪力墙实际工作效率的设想。
Based on ANSYS influence on shear wall elastic buckling load of vary parameters is simulated,and the elastic buckling load formula of the steel shear wall with slits are put forward by mathematical regression.
介绍一种新型的抗侧力构件——带缝钢板剪力墙,利用有限元软件ANSYS模拟分析各种参数对剪力墙弹性屈曲荷载的影响,并在此基础上通过数学回归分析得出带缝钢板剪力墙的弹性屈曲荷载计算公式。
Steel shear wall with slits has b.
带缝钢板剪力墙作为一种新型的抗侧力构件，有着良好的综合效益，在世界范围内对带缝钢板剪力墙研究较多的是日本九州大学以及西日本技术开发股份有限公司。
INFLUENCE OF EDGE CONDITION OF SLIT-STEEL STRIP ON WELDING QUALITY OF SMALL SIZED HEAVY-WALLED WELDED PIPE AND RELEVANT CONTROL MEASURES
纵剪带钢边缘状态对小直径厚壁焊管焊接质量的影响及其控制措施
Design Experience of Strip Slitting Unit Applied for Big Steel Coil,Heavy Thickness and High Strength
大卷、厚壁、高强度带钢纵剪机组的设计
rotary gang slitting
带材多刀圆盘剪纵剪切
Study on the Control of Wending Tension of Slitting Line and Soft Sensor of Tension;
纵剪线带钢卷取张力控制及张力软测量研究
An Algorithm for the Uncoiler Coil Diameter Calculation in the Steel Strip Lengthwise Shearer production Line
开卷机钢卷直径计算优化算法在带钢纵剪生产线中的应用
Experimental Study on Longitudinal Shear of Steel-Concrete Composite Beams;
钢—混凝土组合梁纵向抗剪的试验研究
Cutting Technology of Disc Shear for 80 kg Grade TRIP Steel Plate
80kg级TRIP钢带圆盘剪剪切工艺
Discussion and analysis on processing of aluminum strips by slitter with disk knife
圆盘刀纵剪铝合金带材工艺方法探析
Experimental Study on the Resistance to Longitudinal Shear of Composite Beams with Profiled Sheeting;
钢—压型钢板混凝土组合梁纵向抗剪试验研究
The Analysis on Seismic Property of Steel Frame-steel Plate Shear Wall with Slits
钢框架—带缝钢板剪力墙抗震性能分析
Experimental and Theoretical Studies of Thin Vertical and Lateral Stiffened Steel Plate Shear Walls;
纵横加劲肋钢板剪力墙试验与理论研究
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
The Research on Anti-lateral Behavior of Full-stiffened Steel Plate Shear Wall with Slits;
全加劲带缝钢板剪力墙抗侧性能研究
The Structural Analysis and Experimental Study of Steel Shear Wall with Slit;
带缝钢板剪力墙结构分析与试验研究
Adiabatic Shear Bands of 4Cr5MoSiV1 Steel Formed by High Speed Cutting
高速切削4Cr5MoSiV1钢形成的绝热剪切带
Two Types of Adiabatic Shear Bands in 40CrNi2Mo Steel Targets
高强度钢板中的两种类型绝热剪切带
Analysis for Hysteretic Behavior of Stiffened and Seamed Steel Plate Shear Wall
全加劲带缝钢板剪力墙滞回性能分析
The Experimental Study on Seismic Beheavior of Shear Wall with Vertical Steel and Lead Energy Dissipation Band;
带竖向软钢—铅耗能带剪力墙抗震性能试验研究
