The evaluational equations for elastic plastic fracture analysis are also given.
给出了带裂纹的半圆环形曲杆（板）的线弹性解和全塑性解，所考虑的材料是符合Ｒａｍｂｅｒｇ－Ｏｓｇｏｏｄ本构律的材料，同时也给出了这种构件的弹塑性断裂分析的弹塑性评定方程。
The COD、CTOD and CTSD were de-termined by duplicated film method and used to analyse the behavior of mixed Ⅰ+Ⅱ elastic-plastic fracture in aluminium alloy Ly12, and then the relationship between COD and J-integral for differ-ent mixed ratios was also discussed.
对铝合金Ly12复合Ⅰ＋Ⅱ型弹塑性断裂行为进行了COD分析，并对复合载荷下COD与J积分的关系进行了讨论。
Based on a two-parameter analysis method of elastic-plastic fracture,a theoretical expression of estimating fracture toughness CTOD requirement has been derived for pressure vessels and other important engineering structures.
本文在弹塑性断裂双参数分析方法的基础上,导出了预测压力容器等重要工程结构断裂韧度CTOD要求的理论表达式。
The materials concerned follow Ramberg -Osgood s constitutive law,and the evsluational equations for elastic-plastic fracture analysis are also given.
所考虑的材料是符合Ｒａｍｂｅｒｇ－Ｏｓｇｏｏｄ本构律的材料，并给出了这种构件的弹塑性断裂分析的弹塑性评定方程。
Method for Determining Elasto-plastic Fracture Toughness of Lce
冰的弹塑性断裂韧性测定方法的研究
Investigation into Viscoelastic-Plastic Fracture Parameters of Asphalt Mixture
沥青混合料粘弹塑性断裂参数的研究
The Research of J～* Integral in Elastic-Plastic Fracture Mechanics and Fracture Criterion for Mixed Mode Crack Propagation;
弹塑性断裂力学之J～*积分与复合型裂纹扩展断裂准则的研究
Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
AN APPLICATION OF THE MESHLESS LOCAL PETROV-GALERKIN METHOD IN THE ELASTO-PLASTIC FRACTURE PROBLEM
无网格局部Petrov-Galerkin方法在弹塑性断裂力学问题中的应用
Element-free method for elasto-plastic fracture analysis of aluminum foam by a continuum constitutive model
基于连续本构模型的泡沫铝弹塑性断裂问题无网格法分析
Combination of Analytical and Finite Element Methods for Plane Elastic-plastic Fracture Analysis and Its Applications to the Fracture of Concrete Structures;
平面弹塑性断裂分析的解析与有限元结合解法及其在混凝土断裂力学中的应用
elastic plastic fracture mechanics
弹性 塑性断裂力学
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
Elastic-plastic fracture analysis of multiple-cracks with two-parameters under biaxial loads
双向荷载下多裂纹弹塑性双参数断裂分析
The different kinds of material deformation (elasticity, plasticity, fracture, creep, fatigue) are explained in detail.
不同种材料的变形（弹性，塑性，断裂，蠕变，疲劳），详细解释了。
The Study on the Experiment of the Dynamic Fracture Toughness of Rate-dependent and Elastic-plastic Materials;
应变率相关弹塑性材料动态断裂韧性的试验研究
STUDY ON FATIGUE PROPERTY OF NOTCHED ELECTROPLATED COPPER THIN FILM BASED ON FEM
基于弹塑性有限元分析的电镀铜薄膜缺口疲劳断裂特性研究
Topics include: elasticity, viscoelasticity, plasticity, creep, fracture, and fatigue.
主题包含：弹性、黏弹性、塑性、潜变、破断及疲劳。
Comparison of Elastic-Plastic FE Method and Engineering Method for RPV Fracture Mechanics Analysis
反应堆压力容器断裂力学分析中弹塑性有限元方法与工程方法的比较
In Situ Investigation on Plastic Deformation and Cracking of Metals under TEM/SEM;
金属塑性变形与断裂的TEM/SEM原位研究
Indentation-induced Plasticity,Damage and Fracture in Si and GaAs Single Crystals
压痕诱发GaAs和Si晶体塑性、损伤与断裂
Analysis and Research of the Elasto-plastic Damage Characteristics of Layered Fractured Rock Mass;
层状裂隙岩体弹塑性损伤特性的分析与研究
