Numerical simulation of arc reflection in plasma arc welding processing;
等离子弧焊中电弧反翘现象的数值模拟
Penetration control system for keyhole pulse plasma arc welding based on reflecting plasma-flame voltage;
基于反翘电压的脉冲穿孔等离子弧焊熔透控制系统
Detection of keyhole behavior in keyhole plasma arc welding using plasma cloud voltage;
等离子弧焊小孔行为的反翘电压检测
Effect of Parameters and Temperature Distribution on Microstructure and Mechanical Properties of Welded Joint during PAW of SiCp/6061Al;
工艺参数及温度场分布对SiCp/6061Al等离子弧焊焊缝组织及性能的影响
Study of Plasma Cloud Sensing of Keyhole Signal in PAW;
等离子弧焊小孔信号的等离子云传感研究
Numerical Simulation of the PAW Process;
等离子弧焊接过程的数值模拟
The tests of 400MPa ultrafine grained steel plasma welding and cooling treatment with later were carried, and the structure and property of plaoma welding joint were analyzed under different eondition.
对400 MPa超级钢进行等离子弧焊焊接试验和焊后深冷处理,并对不同工艺条件下的焊接接头进行了组织性能分析。
This paper also introduces the breakdown and solutions of Japanese A-70 plasma arc welding machine.
同时列举了日本A-70等离子弧焊机的故障实例和解决方法。
Finite element method analysis of temperature field in keyhole plasma arc welding;
小孔等离子弧焊接热场的有限元分析
Research on control system of plasma arc welding in motorcycle gearing wheel;
摩托车传动齿轮盘等离子弧焊接控制系统的研究
Energy Analysis of Keyhole Plasma Arc Welding;
小孔法等离子弧焊接的能量分析
Analysis on power loss of plasma arc in keyhole plasma arc welding
小孔等离子弧焊的等离子弧功率损失分析
Study of Plasma Cloud Sensing of Keyhole Signal in PAW;
等离子弧焊小孔信号的等离子云传感研究
A Simulation of Keyhole Plasma Arc Welding in Aluminium Alloy;
铝合金穿孔型等离子弧焊接过程模拟
STUDY ON FRONT SIDE ARC LIGHT SENSING IN KEYHOLE. MODE PLASMA ARC WELDING
穿孔等离子弧焊正面弧光传感技术研究
CLOSE LOOP CONTROL OF WELD PENETRATION IN PULSE PLASMA ARC WELDING
脉冲等离子弧焊接焊透质量的闭环控制
Study on Welding Procedure Digital Control of Micro Plasma arc Welding Machine
微束等离子弧焊机焊接程序数字控制研究
Study on the Technologies of Variable Polarity Plasma Arc (VPPA) and Activating Flux TIG (A-TIG) for Magnesium Alloy Welding;
镁合金变极性等离子弧焊及活性化焊接研究
The study of welding about plasma arc welding in hot battery;
等离子弧焊应用于热电池壳身焊接工艺研究
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
The Control of Process Parameters in the Controlled Pulsed Keyhole Plasma Arc Welding;
受控脉冲穿孔型等离子弧焊接工艺参数的控制
Research on Automatic Control System for Keyhole Plasma Arc Welding Penetration;
小孔型等离子弧焊熔透自动控制系统研究
The Three Dimensional Numerical Simulation of Temperature and Fluid Flow Fields of Plasma Arc Welding;
等离子弧焊接熔池流场与温度场三维数值模拟
Research on High-power Variable Polarity Plasma Arc Welding Power Supply System;
大功率变极性等离子弧焊电源系统的研究
The Development of Fuzzy Control System of Pulse Plasma Arc Welding;
脉冲等离子弧焊接模糊控制系统的研制
Numerical Simulation of the 3-D Transient Temperature Fields in Keyhole Plasma Arc Welding;
三维瞬态小孔等离子弧焊接温度场的数值模拟
Detection and Anlysis of Penetration Control Information in Plasma Welding;
等离子弧焊接熔透控制信息检测与分析
The Equipment of Negative Polarity Weak Plasma Arc Overlaying Welding and the Researching of Arc Character
反极性弱等离子弧堆焊设备及电弧特性研究
Behavior Analysis of Low Power YAG Laser-Gas Metal Arc Welding Hybrid Welding Arc Plasma
低功率YAG激光-熔化极气体弧焊复合焊接电弧等离子体行为研究
