Selection of complexing agents for cyanide-free alkaline zinc-nickel alloy electroplating;
无氰碱性锌镍合金电镀中配位剂的选择
The main points of environmental impact assessment of electroplating project;
电镀项目环境影响评价要点
Spectrophotometric Determination of the Content of Rare Earth Elements in Electroplating Baths;
分光光度法测定电镀液中的稀土元素含量
Monitor Plating Bath by CVS (Cyclic Voltammetric Stripping);
用于监控电镀槽液的CVS技术
Approach to technical renovation of plating factories for cleaner production;
电镀清洁生产技术改造宜从何处入手
Cleaner production process of Zn-Fe alloy plating;
清洁生产型锌铁合金电镀工艺
Establishment of clean production management model in electroplate centralization control region in Jiangxi;
江西电镀集控区的清洁生产管理模式构建
Uniformity Research on the Zn coat of Zn electroplated Steel Wire;
电镀锌钢丝锌层均匀性研究
Electroplated method for making diamond-coated grinding discs and burrs used on CEREC II CAD/CAM system;
用于CEREC II型系统的电镀金刚石磨盘及切针的加工工艺
Research Status on Electrodeposition for Substitute Hard Chromium
代替镀硬铬电镀层的研究现状
The aluminum-coating layer was formed on copper substrate with local strain region by using electrodeposition method.
通过电化学方法在带有局域应力的铜表面电镀形成一层铝膜。
A new method of direct electrodeposition on copperized short carbon fibers (CFs) was developed and copper matrix composites were prepared by cold press and sintering.
开发了一种对短碳纤维直接电镀铜的新方法,并将得到的镀铜短碳纤维直接进行冷压烧结制备铜基复合材料,对镀铜碳纤维和复合材料的组织和性能进行了研究。
Many factors influence the wear of electroplated diamond tools.
影响电镀金刚石工具磨损的因素很多,正交试验设计法可以简便、有效地解决各因素对工具性能的影响而达到最佳组合,为生产提供可行的加工工艺参数。
It is confirmed that the pregnanted drill bit should be given first priority for the solution of slipping layer to improve the effectiveness, compared with the electroplated bit in preventing slipping while cutting through the layer.
文章比较了电镀和孕镶金刚石钻头在该类地层防“打滑”的研制情况 ,确定孕镶钻头是解决“打滑”岩层并提高生产效率的最佳选择。
In this paper, a kind of coarse grain electroplated diamo.
本文提出了一种粗粒度电镀金刚石磨轮 ,以磨削代替铰削 ,克服了铰刀的不足。
To galvanize or plate(metal)by immersion.
电镀通过浸泡镀涂金属
Electro galvanized Steel Sheet
电镀锌(电解)钢片
To coat with tin, either by dipping or electroplating.
镀锡在…镀锡，通过浸染或电镀的方式
Study on Iron Electroplating and Fe-SiC Composite Electroplating Technics;
电镀铁及Fe-SiC复合电镀工艺的研究
Micro-via Filling and Through Hole Plating in one Process in Vertical Line
垂直电镀线盲孔和通孔同步电镀工艺
Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet
电镀锌钢片或电解钢片
electrochemical etching and replating process
电化腐蚀和电镀工艺
Grade, Plating type, Designation of Coating Mass & Common Coating Mass
级别、电镀方法、镀层质量及常用称号
Analysis of Concave Dent in Pattern Plating
图形电镀中抗镀现象——凹坑的原因剖析
Study on Process and Properties of Ni-W Alloy Coatings Produced by Pulse Plating;
脉冲电镀Ni-W合金镀层及其性能研究
Study on Electroplating Ni-Sn-P Alloy Coating and Composite Coating
电镀Ni-Sn-P合金及其复合镀层的研究
Effects of pH values on the quality of plated Ni-W alloy coating
pH值对镍钨合金镀层电镀质量的影响
Effect of temperature on the quality of electro-deposited Nickel-Tungsten coating
温度对镍钨合金镀层电镀质量的影响
Direct Determination of Hexavalent Chromium in Trivalent Chromium Plating Bath
电镀三价铬镀液中Cr~(6+)的直接测定
"Tinplating: Applying a coating of tin to thin steel sheet either by dipping in molten metal or by electrolytic deposition (electroplating); almost all tinplate is now produced by the latter process, in which the tin coating is applied without heat."
镀锡钢板:用浸入熔融金属或电镀的方法,镀覆锡的薄钢板,目前几乎所有的镀锡钢板经电镀生产。
Galvanizers Association of Australia (GAA)
澳大利亚电镀工协会
specially shaped electroplated diamond products
异型电镀金刚石制品
Advantage of Using Plate Metal Strip
电镀金属捆片的优点
