Performance compares of brazing filler metal of home and abroad used in heat-resistant alloy;
国产耐热合金钎料与进口钎料的性能比较
Effects of different powders on the properties of heat-resistant alloys prepared by metal injection molding;
不同类型粉末对金属注射成形耐热合金性能的影响
Since heat-resistant alloy has the characteristics of heavy ductility,large plasticity,strong adhesion and low grinding efficiency,we propose a novel design philosophy of electrolysis spark mechanical grinding technique.
针对耐热合金韧性塑性大、粘附性强、磨削效率极低的特点,提出了一种新的电解电火花机械磨削复合加工方法设计思想。
Influence of Rare Earth Element on Oxidation Behavior of Casting Fe-Cr-Ni-Al Heat Resistant Alloy;
稀土元素对铸造Fe-Cr-Ni-Al耐热合金抗氧化性能的影响
Vacuum diffusion welding of refractory steel to heat resistant alloy was investigated in this paper.
针对耐热合金与耐热钢的真空感应扩散焊，研究了扩散焊连接工艺参数对接头变形率的影响、接头变形率与接头性能的关系以及不同接头变形率的微观形态。
Different amounts of mixed rare-earth(RE) metals were added in Fe-Cr-Ni heat-resisting alloy.
在Ｆｅ－Ｃｒ－Ｎｉ奥氏体耐热合金中加入不同量的混合稀土元素，在１０５０℃时进行持久试验。
The vacuum diffusion bonding between K5 heat-resisting alloy and 2Cr12NiWMoV heat-resisting steel was studied,and the effects of the welding parameter T,P and also the interlayer thickness on the microstructure and properties of the joint were investigated.
本文通过Ｋ５耐热合金与２Ｃｒ１２ＮｉＷＭｏＶ耐热钢的真空扩散连接，研究了焊接工艺参数Ｔ、Ｐ、ｔ及中间层厚度对接头组织与性能的影响规律。
Relationship between the elastic-plastic deformation at the notch root of heat resisting alloy specimen under 450℃ and the fatigue cycle was studied based on digital speckle correlation technique.
应用数字散斑相关技术研究了耐热合金试件在450°环境中缺口根部的弹塑性变形及其与疲劳循环次数的相关性。
Experiment Research on the Structure and Properties of Heat Resistance Alloy Ductile Iron
耐热合金球墨铸铁组织和耐热性能的试验研究
Haynes 25 alloy
海纳25钴铬钨镍耐热合金
The Experimental Research on Brazing Process of Fe_3Al and High Temperature Heat-resistant Alloy
Fe_3Al与高温耐热合金的钎焊性能研究
Microstructure and Properties of Heat- and Wear-resistant Al-Si Alloy Prepared by Spray Deposition;
喷射沉积Al-Si系耐热耐磨合金的组织及性能
Study on the Microstructure and Properties of a Special Low-Alloy Steel with Wear-Heat Resistance;
特种低合金耐磨耐热钢组织和性能的研究
Microstructures and Properties of Aluminum Alloy with Heat- and Wear-Resistance Prepared by Spray Forming;
喷射沉积耐热耐磨铝合金的组织和性能研究
Potential development tendencies and research directions about heat-resistant magnesium alloys are proposed.
最后指出发展耐热镁合金的主要方向。
The Microstructure and Properties of Mg-4Al-RE-Ca-Si Heat-resistant Magnesium Alloys;
Mg-4Al-RE-Ca-Si耐热镁合金的组织与性能
The Study on Heat Treatment Technology of 55Cr5SiMoVNi Abrasive Cast Steel;
55Cr5SiMoVNi耐磨合金铸钢热处理工艺的研究
The Study of Casting Magnesium Alloy GYZ103 with High Strength and Heat Resistance;
GYZ103高强耐热铸造镁合金的研究
The Microstructures and Mechanical Properties of Spray Deposited Heat Resistant High-Silicon Aluminum Alloy
喷射沉积耐热高硅铝合金组织及性能
The Research of the Heat Treatment of the Low-alloy High Strength Steel
低合金高强度耐磨钢热处理工艺研究
Development of Alkaline-earth and Heat-resistent AM80-Ca-Sr Magnesium Alloys
AM80-Ca-Sr碱土耐热镁合金研究
Tribological Characteristics of Heat Resistant Magnesium Alloy AZE and AS41
AZE和AS41耐热镁合金的摩擦学行为研究
Study on High Strength Heat-Resistant Al-Si Piston Alloys
高强耐热Al-Si活塞合金的研究
Formation and properties of low expansive and heat-resistant aluminum alloy with high silicon content
耐热低膨胀高硅铝合金的成形与性能
Corrosion-resistant Properties of Hot-dip Galvannealed Steel Sheets
热镀锌合金化钢板的耐腐蚀性能研究
A Study on Hot Workability of Corrosion Resistance Alloy G3,G3-Z and 825
耐蚀合金G3、G3-Z和825热加工性的研究
