Determination of Iron and Nickel Content in RCoCr-A by FAAS;
用火焰原子吸收光谱法测定钴基合金焊丝S111中铁和镍
Microstructure in Fe-Cr-C hardfacing alloys with high C and Cr;
Fe-Cr-C系高碳高铬耐磨堆焊合金微观组织分析
Orientation control of primary carbide in Fe-Cr-C hardfacing alloys;
Fe-Cr-C耐磨堆焊合金中初生碳化物生长方向的控制
Influence of the component of Cr-Mo-V hardfacing alloy on its organization and properties;
Cr-Mo-V堆焊合金的成分对其组织及性能的影响
A kind of hardfacing alloys were developed for impact wear-resistant which is a Fe-Mn-Cr-Mo-V alloy system.
成功研制了一种适用于抗冲击磨料磨损条件下的堆焊合金,合金系统为Fe-Mn-Cr-Mo-V,在受到较大载荷冲击后较焊态堆焊层硬度提高66%。
Study on Fe-Cr-C Hardfacing Alloys with High Carbon Contents;
Fe-Cr-C高碳耐磨堆焊合金的研究
Characteristic Analysis on Fe-Cr-C-Mo Hardfacing Alloy Layer
Fe-Cr-C-Mo堆焊合金层的特征分析
Poly-elements Strengthening for Iron-based Overlay Welding Alloys and Its Wear Resistance Mechanism;
多元复合强化铁基堆焊合金及耐磨机理
Research of the Super High Carbon and Chromium Microstructures of Hardfacing Alloys;
超高碳高铬耐磨堆焊合金微观组织研究
Mechanical Properties of Iron Based Surfacing Alloys Applied DC Transverse Magnetic Field;
直流横向磁场作用下铁基堆焊合金的力学性能
Study of Wear-resistant and Abrasion Mechanism of Co-Cr-W Hardfacing Alloys;
Co-Cr-W堆焊合金耐磨性及耐磨机理的研究
Effect of Transverse Magnetic Field Frequency on Microstructure and Properties of Fe5 Deposited Metal
横向磁场频率对Fe5堆焊合金组织性能的影响
Design and Research for Fe-Cr-C Hardfacing Alloys with Anti-wearing and Anti-cracking
Fe-Cr-C系耐磨高抗裂堆焊合金的设计和探讨
Study on the Overlaying Property and Hot Corrosion Resistance of Fe_3Al Alloy Overlayer;
Fe_3Al合金堆焊及堆焊层的耐热腐蚀性能研究
The Influence of Carbon Content on the Hardness and Microstructure of Layer on Weld Deposit Rob with Multi-elements Alloying System
碳含量对多元合金系堆焊焊条堆焊层硬度的影响
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
Deposit and Metallurgical Behavior of Nitrogen-alloying Hardfacing Alloy
氮合金化堆焊硬面合金及其冶金行为研究
The Research of Domestic Manufacture of Cored Hard Alloy Wire for Harding Rollers;
辊堆焊硬质合金类药芯焊丝应用国产化研究
Three-Dimensional Numerical Simulation on the Process of Carbide Wear in Surfacing Welding;
硬质合金耐磨堆焊过程三维数值模拟
Study on Fe_3Al Cladding Materials;
Fe_3Al基金属间化合物堆焊材料的研究
Technique analysis of surfacing 16MnR steel with Mone1400 alloy
Monel400合金/16MnR基体堆焊工艺分析
Research on the microstructure of the Co-base alloy oxyacetylene welding surfacing
氧气-乙炔堆焊Co基合金显微结构研究
Filler rods for gas welding of mild steels and low alloy high tensile steels - Determination of mechanical properties of deposited weld metal
软钢、低合金高强度钢气焊用焊条－－堆焊金属的力学性能的测定
