A method to predict residual distortion based on inherent strain and its application to heating processes;
热变形的固有应变预测法及实例
Prediction of welding deformations of stiffened plate based on inherent strain;
基于固有应变的加筋板焊接变形分析
In this paper,buckling of thin plate due to butt weld is investigated using inherent strain method as an equivalent load.
提出了基于固有应变对接薄板失稳分析的基本方程。
Prediction of distortion based on inherent strain method in multipass girth-butt welded pipes;
基于固有应变法筒体对接多道焊焊接变形的预测
In this paper, the welding deformation of resistance spot welding of stainless steel was studied, using ordered coupling style to realize the multi-physical fields coupled simulation analysis, and finally realizing predict welding deformation results of resistance spot welding of stainless steel by inherent strain method.
本文针对不锈钢电阻点焊接头焊接变形问题进行了研究,采用顺序耦合方式实现了多物理场的耦合模拟分析,在此基础上最终实现了利用固有应变法预测不锈钢电阻点焊接头焊接变形结果。
There are two numerical simulation methods for welding distortion,including the thermal elastic-plastic method and inherent strain method.
数值模拟焊接变形的方法主要有热弹塑性有限元法和固有应变法,目前又提出一种更为简便的方法——焊缝收缩力法。
It isn't necessary to remove the inherent strain source for the aim of relieving welding stresses, sometimes th.
消除焊接残余应力并不是一定要去除固有应变源,有时不去除固有应变源仍可消除残余应力。
Taking a welded T-joint as computing example,the work effect of each inherent strain component upon fillet weld's angular distortion is studied through FEM numerical method.
以T形焊接接头为算例,用有限元数值计算方法研究了六个固有应变分量各自对角焊缝角变形的作用效应,发现导致角变形产生的主要因素是与焊缝平行的平面内垂直于焊缝方向的固有剪切应变分量;将该固有剪切应变分量以均匀和非均匀两种分布形式施加在焊缝区,发现只有非均匀分布的固有剪切应变使焊接接头产生角变形。
Prediction of Welding Deformations of Ship Structures Based on Inherent Strain;
基于固有应变的船体分段焊接变形预测
Prediction for Welding Deformations of Curved Hull Block Based on Inherent Strain;
基于固有应变的船体曲板焊接变形预测
Research of large complicated structure welding deformation prediction based on inherent strain methods
大型船舶结构焊接变形固有应变法预测研究
Welding distortion prediction and control research of forklift gantry based on inherent strain theory
基于固有应变理论的叉车门架焊接变形预测及控制
Application of Elastic-plastic Inherent Strain Method by FEM on the Welding of a Thick Spherical Bulkhead
弹塑性固有应变法在厚壁球面舱壁结构焊接中的应用
Study on Finite Strain Consolidation Theory under Osmotic Pressure;
渗压作用下的有限应变固结理论研究
Theory and Finite Element Analysis of Finite Non-linear Consolidation of Soft Clay Ground;
软粘土地基非线性有限应变固结理论及有限元法分析
(of a number) having a fixed and unchanging value.
（指数量）有固定不变的值。
So the composite has sensitivity of strain rate during compression in semi-solid interval.
复合材料在半固态区间压缩时具有应变速率敏感性.
Experimental Investigation and Finite Element Analysis of Consolidation-Creep Coupling Effect of Soft Soil;
软土固结—蠕变耦合效应的试验研究及有限元分析
Research of Load-Ratio Voltage Distribution Transformer for Application of Solid State Relay;
固态继电器在配电变压器有载调压中的应用研究
Research on dissipation of excess pore water pressure in one-dimensional finite strain consolidation of soft clays
软黏土层一维有限应变固结的超静孔压消散研究
A variable so related to another that for each value assumed by one there is a value determined for the other.
应变量，函数一个与他量有关联的变量，这一量中的任何一值都能在他量中找到对应的固定值
On the Stress-Strain-Strength Characteristics of Quasi-Overconsolidated Clay
拟似超固结粘土的应力-应变-强度特性
Effect of Surface Stress and Solid Phase Transition of Nanomaterials;
纳米材料的表面应力效应及固态相变
The gauge is firmly fixed to a part of the structure.
应变仪坚固地固定于结构的一个部位上。
"Wise men chanbge their mind, fools never"
聪明人随机应变,愚蠢者固执己见
Wise men change their mind, fools never.
聪明人随机应变，愚蠢者固执己见。
