Based on finite element analysis of the die spotting machine frame,the real case of stress distribution and deformation is simulated,by which the biggest deformation and stress location are identified.
通过对合模机机架进行有限元分析,模拟了真实情况下机架的应力分布和位移变形情况,得到了位置变形最大和应力值最大的位置。
The method of how to choose die spotting machine is introduced in detail.
详细介绍了如何选择合模机的方法。
The frame of die spotting machine was analysed by finite element method.
通过对合模机机架进行有限元分析,模拟了真实情况下机架的应力分布和位移变形情况,得到了位置变形最大和应力值最大的位置;通过改变机架控制器面板的位置,使合模机机架的受力情况得到了较为明显的改善,各个方向的位移均有不同程度的减小,为改善合模机的精度提供了可供借鉴的理论基础。
In this paper,based on design requirements of 920 SEF automatic die cutting and foil stamping machine,the symmetrical Crank-elbow bars mechanism is chosen as opening-closing die mechanism.
根据920SEF模切烫金自动机合模机构的工作要求,提出了采用对称的曲柄肘杆机构作为920SEF模切烫金自动机的合模机构;并给出了该曲柄肘杆合模机构结构参数以及工作滑块(动平台)的位移与曲柄(曲轴)转角的数值关系,最后分析和总结了这种合模机构的结构特性。
Improvement on design of oblique joint-double five-hinge toggle clamping unit of injection molding machine;
双曲肘五孔斜排合模机构的设计改进
A software for assisting the design of clamping units on injectors was developed.
针对注射机机械合模机构 ,以自动化设计为目标 ,集成数据管理、机构参数优化与特性分析、三维运动模拟、有限元分析和零件库的软件开发。
Optimal design for locking mechanism of die casting machine;
压铸机合模机构的优化设计
Orthogonal & regressive optimal design for locking mechanismof die casting machine;
压铸机合模机构的正交回归优化设计
Taking the locking force that produced by the locking mechanism as research object,Through the mechanical analysis of the locking cylinder and the pin shafts,the understanding of the locking mechanism has been improved.
文章以合模机构所能产生的锁模力为研究对象,通过对合模油缸与机铰进行力学分析,增进了对压铸机合模机构的了解,并对现有压铸机的设计提出一些改进意见。
Movement and Forces Characteristics of Double-toggle Clamping Mechanism in Die Casting Machine;
压铸机双曲肘五铰点斜排列合模机构运动和力学特性分析
The clamping mechanisms of injection molding machines were classified according to the number of templates,driving source,the transmission forms,and the mold structure,their function,construction,and performance characteristics were discussed.
从注塑机合模机构的功能、结构及性能特点出发,对其按照模板数目、驱动源、传动形式、合模架构等特点进行了详细分类,再选取双曲肘式、全液压直压式、无拉杆式、二板复合式4种典型的合模机构进行分析,总结出各自的结构特性及应用情况。
Design and FEA for the Locking Mechanism of RD400C Cold Chamber Die Casting Machine;
RD400C冷室压铸机合模机构的设计及有限元分析
The FEM Research on Shutting Mould Structure of Die Casting Machine Based on ANSYS;
基于ANSYS的压铸机合模机构有限元分析研究
Optimization Design for Oblique Five Hinge Joint-Double Toggle Clamping Unit of Injection Molding Machine;
注射机五孔斜排双曲肘合模机构的优化设计
Discussion of elasticity and mechanical properties of elbow rod mold closing for injection molding machine (part four)
注塑机肘杆合模机构弹性力学性能的探讨(四)
Discussion of elasticity and mechanical properties of elbow rod closing mold for injection molding machine (part three)
注塑机肘杆合模机构弹性力学性能的探讨(三)
Discussion of elasticity mechanics properties of elbow rod fitting model for injection molding machine (part two)
注塑机肘杆合模机构弹性力学性能的探讨(二)
Discussion of elasticity mechanics properties of elbow rod fitting model for injection molding machine (part one)
注塑机肘杆合模机构弹性力学性能的探讨(一)
SimMechanics based on the injection molding machine and the optimization of design simulation
基于SimMechanics的注塑机合模机构的优化设计与仿真
Computer Aided Design of Die Open-closing Institution in the Automatic Blow Molding Machines
自动吹塑机模具开合运动机构计算机辅助设计
Demoulding Structural Design of Core Cooperating Pushing Plate Dual-Corn
型芯与推板双锥面配合脱模机构设计
Computer Simulation of Al-(Cu)-(Mg) Alloy Microstructural Evolution;
Al-（Cu）-（Mg）合金微结构演化的计算机模拟
Establishment of Public-private Game Frame and Cooperation Mechanism for PPP Model;
PPP模式公私博弈框架和合作机制构建
Mechanical Structure Model Research on Hull Assembly Devices
船体分段合拢设备机械结构模型研究
Reconstruction of Assembled Model in Plane Framework Innovation
平面机构创新组合模型的立体化改造
Multi-Robot Map Building Based on Hybrid DSm Model
基于混合DSm模型的多机器人地图构建
The Research on Sliding Mode Variable Structure Control Applied to Hybird-Driven Five-Bar Mechanism;
混合驱动五杆机构系统滑模变结构控制的研究
Construction of dynamics model of the cam typed combination mechanism in the ATC device
ATC装置中凸轮式组合机构动力学模型的构建
New Generation Tower Simulator and Its Multilayered Synthetical Modeling Structure;
新一代塔台模拟机及多层综合建模结构
