Preparation of Mg-Al/Al Gradient Composites by Continuous Casting;
连续铸造制备Mg-Al/Al梯度复合材料的试验研究
Effect of technological parameters on the surface quality during cold crucible continuous casting of Ti6A14V ingots;
工艺参数对冷坩埚连续铸造Ti6Al4V表面的影响
Effect of middle frequency electromagnetic field on surface quality of continuous casting aluminum alloy ingot;
中频电磁场对连续铸造铝合金铸锭表面质量影响(英文)
Modeling of Semi-continuous Casting Process for 7050 Aluminum Alloy Ingot;
7050铝合金大铸锭半连续铸造过程数值模拟
5052 Alloy Ingot in Semi-continuous Casting;
5052合金铸锭半连续铸造工艺的研究
Study on the microstructure of AZ91D magnesium alloy by the near-liquidus semi-continuous casting;
近液相线半连续铸造AZ91D镁合金微观组织研究
A new process, liquidus semi continuous casting(LSC) to produce semi solid slurries of aluminum alloy, was presented.
提出了液相线半连续铸造制备铝合金半固态浆的新工艺 ,研究了液相线半连续铸造 70 75合金的微观组织及其在二次加热过程中的变化。
The topography of the surface defect,the phase and chemical composition,the microstructure,the grain and the impurity elements of hot rolled H68 copper alloy strip from semi continuous casting were analyzed.
针对半连续铸造的H68铜合金带材锭坯热轧时出现表面缺陷,通过分析缺陷的形貌、相及合金成分、组织及晶粒、夹杂及杂质元素,认为导致缺陷的主要原因是铸造产生皮下气孔,热轧时氧化,无法通过压力加工焊合,造成应力集中,形成表面缺陷;次要原因是铸造的夹杂和杂质元素热轧时暴露,由于和基体的变形不协调,形成裂纹。
The system has been operated in factory．The operating results show that the system de-sign is reasonable；the functions are complete；the work is reliable and convenient．It is a goodcomputer control system for continuous casting machine.
介绍连续铸造机计算机控制系统的控制方案、组成原理以及速度和长度的０控制方法，并给出应用软件的程序框图。
cable semicontinuous casting machine
钢丝绳半连续铸造机
The Stability Analysis for the Frame of the Aluminum Ingots Continuous Casting Machine;
铝锭连续铸造机支承件的稳定性分析
Numerical Simulation of Solidification Process in Continuous Casting of HRB400 Steel
HRB400钢连续铸造凝固过程数值模拟
Improvement on the de-moulding mechanism for 20 kg aluminium ingot continuously casting machines
20kg铝锭连续铸造机组脱模机构的改进
Effect of Casting Process Parameters on Quality of 7050 Aluminum Alloy Slab by Semi-Continuous Casting
铸造参数对半连续铸造7050铝合金板坯质量的影响
Evolution of the Semi-Solid Microstructures of 7075 Aluminum Alloy Cast by LSC
液相线半连续铸造7075铝合金半固态组织演变
As-cast Microstructures of 356 Aluminum Alloy Cast by LSC
356铝合金液相线半连续铸造组织的研究
Technique and Theory of Semi-continuous Casting of Aluminum Alloys under Low-frequency Electromagnetic Field;
低频电磁半连续铸造铝合金工艺及理论研究
Study of Technique Optimization and Structure Property of Electromagnetic Continuous Casting;
电磁连续铸造过程工艺优化及组织性能研究
Research on Electromagnetic Semi-continuous Casting of 7050 Aluminium Alloy Slab;
7050铝合金板坯电磁半连续铸造技术研究
Development of Continuous Casting Techniques of Gradient Composites;
连续铸造技术制备梯度功能材料的研究进展
Research on Horizontal Electromagnetic Continuous Casting of Copper and Copper Alloy Hollow Billets
铜及铜合金管坯水平电磁连续铸造技术研究
Study on Monitoring Network System of Aluminium Alloy Semi-Continuous Casting
铝合金半连续铸造生产监控网络系统研究
Design and Research on Compound Magnetic Field Control System of Aluminum Alloy Electromagnetic Semi-continuous Casting
铝合金半连续铸造复合电磁场控制系统的研究
Numerical Simulation of Electromagnetic Suspension Continuous Casting of Magnesium Billets
镁合金电磁悬浮连续铸造过程数值模拟
FEM Simulation of Temperature Field in CPC High-speed Steel Roller in Continuous Casting
CPC高速钢轧辊连续铸造温度场有限元模拟
Study on the microstructure of Al-Mg-Si-Cu alloy semi-continuously cast near liquidus
Al-Mg-Si-Cu合金近液相线半连续铸造组织研究
Preparation Process and Feasibility Study on Continuous Casting of TiNi Alloy
TiNi合金制备技术及连续铸造的可行性探讨
