But the non-reversing gas regenerative burner technology is the better choice because the equipment investment is lower,the system is more simple,the small rate of equipment failure and using safer and more reliable.
而煤气不换向蓄热式烧嘴设备投资少,系统简化,故障少,使用安全可靠。
Against the main problem of combustion gas leak in the using process of regenerative burner at No.
文章针对济钢中厚板厂2#加热炉蓄热式烧嘴使用过程中出现的冒火问题,介绍了优化改造方案及其应用效果。
In accordance with the reform item of the heating furnace with regenerative burner in No.
结合公司第一小型轧钢厂蓄热式烧嘴加热炉中修改造项目,介绍了蓄热式烧嘴加热炉的概况、燃烧系统的结构特点。
The characteristics,performance parameters and control system of walking beam furnace with regenerative burner were introduced.
介绍了本溪钢铁集团公司特钢厂蓄热式烧嘴步进梁式加热炉的特点、技术性能参数及对该炉的控制和管理情况,并介绍了蓄热式燃烧系统的主要特征。
The author points out an average of 50% of increase in heat utilization efficiency can be achieved by adopting such kind regenerative burners.
简要介绍了熔铝炉用蓄热式烧嘴技术的原理,熔铝炉采用该技术可使炉子热效率提高到50%左右,可实现烟气余热的最大回收,较好地解决了高温烟气余热回收中粉尘附着和侵蚀的技术难题;还结合生产实践对熔铝炉采用蓄热式烧嘴时应注意的一些问题、常见的故障及处理方法进行了讨论。
Applications of self preheating burner in aluminium melting furnace, its energy saving effects and some suggestions are presented.
阐述了自身预热式烧嘴在熔铝炉中的应用情况及节能效果,提出了对目前采用自身预热式烧嘴熔铝炉的改进意见。
The characteristics of HiTAC and self regenerative burner are presented in this paper.
介绍了高温空气燃烧技术和自身蓄热式烧嘴的特点;结合梭式窑的工作特点,详细阐述了在梭式窑中推广使用自身蓄热式烧嘴的优越性。
Temperature Control System for the Heating Furnace with Regenerative Radiant Tube Burners
基于蓄热式烧嘴的加热炉温度控制系统
Numerical simulation and parameters optimization of combustion process of air-single regenerative burner
空气单蓄热式烧嘴燃烧过程的数值模拟及其参数优化
Numerical Simulation of Temperature Field in Unite Heating Rotary Furnace
蓄热烧嘴与常规烧嘴组合供热式环形加热炉全炉温度场数值模拟
Thanks to the development of new sealing technology, the regeneration type radiant tube nozzle can be used in the vacuum furnace to achieve uniform heating result.
新型密封技术的开发,使蓄热式辐射管烧嘴得以应用在真空炉上,并获得了均匀的加热效果。
Auto-control Scheme for the Combustion System of the Regenerative Reheating Furnace
蓄热式加热炉燃烧系统自动控制方案
The heat accumulation combustion technology has been used in the heating furnace of steel rolling for more than 10 years.
蓄热式燃烧技术用于轧钢加热炉已有十余年。
Combustion and Pollutant Emission Characteristics of the Regenerative Annular Furnace
蓄热式环形加热炉燃烧及污染物排放特性
Application of combustion control technology for regenerative continuous heating furnace
蓄热式连续加热炉燃烧控制技术的应用
Application of Regenerative Combustion Technology in Baosteel 2050 mm Hot Rolling Mill's No.2 Heating Furnace
蓄热式燃烧技术在宝钢2050mm热轧厂2号炉的运用
Application of Air Pre-Heated Regenerative Combustion Technology on Reheating Furnace in Wuhan Steel
空气单蓄热式燃烧技术在武钢加热炉上的应用
Application of thermal recuperative oxidizer and regenerative thermal oxidizer to drying oven of painting line
热回收式和蓄热式热力焚烧系统在涂装线烘干室中的应用
Discussion About Energy Saving and Less Discharge Effect of Regenerative Combustion Technology in Shuttle Kiln
梭式窑应用蓄热燃烧技术的节能减排效果
Study and Application of Regenerative Burning Technology Used for Lead Smelting Furnace
蓄热式燃烧技术在有色熔铅炉的研究与运用
Application of Regenerative Burning Technology and Evaporative Cooling Technology in Walking Beam Type Reheating Furnace
蓄热式燃烧和汽化冷却技术在步进炉上的应用
The research and application of HTAC on rotary reheating furnace
环形炉蓄热式数字化燃烧技术的研究与应用
Numerical Simulation and Experiment Studying of Flow, Heat Transfer and combustion in Regenerative Reheating Furnace;
蓄热式热风炉流动传热与燃烧性能的数值模拟与实验研究
Simulation and Application on Burner Reform of ZSD Hot-Blast Stove
ZSD顶燃式热风炉烧嘴改造的模拟研究与应用
Fault Diagnosis of Radiant Tube Burner for Heat Treatment Furnace and Discussion on Combustion Optimization
辐射管式热处理炉烧嘴故障原因分析及燃烧优化途径探讨