Microstructure and properties of BCu80Ni5SnTi active filler metal for brazing cubic boron nitride
钎焊立方氮化硼BCu80Ni5SnTi活性钎料的组织与性能
Composition design and optimization of Cu-Ni-Sn-Ti active filler metal
Cu-Ni-Sn-Ti活性钎料成分设计与优化
According to the liquidus temperature t ≥1?100℃,cold deformation total range ε ≥40%,the study designed PdNiTi and AuPdNiTi series of high temperature active filler metals,melting temperature,ability of plastic deformation.
根据液相线温度t≥ 110 0℃、冷变形总量ε总 ≥ 40 %要求设计了PdNiTi系、AuPdNiTi系列高温活性钎料 ,对 2种钎料系列的熔化特性、加工性能、润湿性进行了实验研究 。
A Hf containing Ni - base active brazing filler metal wets carbide, nitrde, oxide engineering ceramics very well.
一种含铪的镍基活性钎料对碳化物、氮化物、氧化物工程陶瓷具有满意的润湿性。
Thermodynamic analysis of a Ag-Cu-Ti active brazing alloy;
Ag-Cu-Ti活性钎料热力学分析
The comparison analysis of the experiments show that the activated filler metal with the addition of Ti is suitable to directory brazing of Si3N4/steel, and adopting right stress relaxation layer and seal configuration will increase the joint strength obviously.
表明,含Ti活性钎料适用于Si3N4/钢的直接钎焊;合适的应力缓和层的选择以及套封结构的使用均能明显提高钎接接头强度。
A Study on the Active Brazing of AlN to W-Cu Alloy with Ag-Ti_4 Active Filler Alloy
Ag-Ti_4活性钎料钎焊AlN与W-Cu合金研究
Microstructure and properties of BCu80Ni5SnTi active filler metal for brazing cubic boron nitride
钎焊立方氮化硼BCu80Ni5SnTi活性钎料的组织与性能
Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals
铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
Wetting Research between Al_2O_395 Ceramic and Active Brazing Alloy Containing Al_2O_3;
含Al_2O_3活性钎料与Al_2O_395陶瓷的润湿研究
Composition design and optimization of Cu-Ni-Sn-Ti active filler metal
Cu-Ni-Sn-Ti活性钎料成分设计与优化
Study on bond quality of mo and graphite by vacuum brazing with Ag-Cu-Ti filler matal
Ag-Cu-Ti活性钎料真空钎焊钼和石墨结合质量研究
Study of Microstructure and Properties of Si_3N_4/40CrMo Joint Brazed by Active Brazing Alloy;
活性钎料连接Si_3N_4/40CrMo接头的组织与性能研究
Wetting Property Test Research between Diamond Film and Active Brazing Alloy;
活性钎料与金刚石膜的润湿性试验研究
Wettability and microstructure of multicomponent Cu-based active filler metal on c-BN
多元铜基活性钎料对c-BN的润湿性与微观组织
Study on Preparation and Brazing Diamond Film of Active Coated Brazing Filler Metal;
活性涂层钎料的制备及其钎焊金刚石膜的研究
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
The Research on Properties and Bonding Mechanism of Armorphous Cu-P Filler Metals;
非晶Cu-P钎料的性能及钎焊机理研究
Characteristics of Amorphous Brazing Ribbon of Cu-P Based Alloy
非晶态铜磷钎料真空钎焊紫铜的性能
Study on Processing Technology and Brazing Performance of Ag55Cu21Zn17Sn5Ge2 Solder
Ag55Cu21Zn17Sn5Ge2钎料加工工艺及其钎焊性能的研究
Research on the New Lead-Free Solder Processing Properties of Brazing and Mechanical Properties;
新型无铅钎料钎焊工艺性及机械性能的研究
Study on Mechanical Property and Solder ability of SnAgCu System Lead-free Solder Alloy
SnAgCu系无铅钎料合金力学性能及钎焊性能研究
Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint
Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能
Effect of Cr on Property of Stainless Steel Joint Brazed with Series Ni-P Filler Metal
Cr对Ni-P系钎料钎焊不锈钢接头性能的影响
