Effect of sintering time on the performance of LiNi_xMn_(2-x)O-coated LiCoO_2;
烧结时间对LiNi_xMn_(2-x)O_4表面修饰LiCoO_2性能的影响
It is found sintering temperature and sintering time have small effect on the composition of crystalline phase, but have great effect on the morphology of glass ceramics; When sintering temperature is above crystalline temperature, the effect on the size of crystal is greater.
以硼泥为主要原料对制备玻璃陶瓷工艺进行研究,实验中发现烧结温度和烧结时间对析晶相的成分影响较小,但玻璃陶瓷的表面形貌影响较大;当烧结温度高于析晶温度时,对晶体尺寸影响更大;根据不同烧结温度和烧结时间对玻璃陶瓷结构影响,找出适合的最佳烧结温度和烧结时间,其值为781℃,时间为4h。
Effects of sintering time and crystallizing time on the microstructure of glass ceramic were also analyzed.
以硼泥为主要原料制备微晶玻璃,通过DTA, XRD, SEM等分析方法,对CaO-MgO-Al2O3-SiO2系玻璃的析晶性能进行研究,系统地分析了烧结时间和晶化时间对微晶玻璃结构的影响。
Commercial test of direct recovery of alumina and soda in Sintering process
烧结法硅渣直接烧结回收氧化铝和碱工业试验
Fabrication of Al_3Ti Powder by Sintering Directly and its Reaction Mechanism
直接烧结法制备Al_3Ti粉末及反应机理的研究
Microstructure and Mechanal Property of Samples Prepared by DLMS with FGH95 Powder
FGH95粉末激光直接烧结的微观组织及力学性能
Study on Direct Selective Laser Sintering of Ni-Based Metallic Powder and Key Technologies;
Ni基金属粉末激光直接烧结成形及关键技术研究
3D Finite Element Simulation of the Temperature Field and Experiment Study on Direct Metal Laser Sintering;
金属粉末激光直接烧结温度场的三维有限元模拟及实验研究
Commercial Exprement and Production on Using Steel Making Directly Sludge into Sintering Directly;
炼钢污泥直接混入烧结的试验与生产
Numerical Simulation and Sintering Zone Prediction of Direct Laser Sintering of Multi-component Metal Powders
多组元金属粉末直接激光烧结过程数值模拟及烧结区域预测
Research on Direct Laser Metal Sintering of Nickel-based Metal Powder Material;
直接激光烧结镍基高温合金的工艺研究
Experimental Investigation on Direct Metal Laser Sintering of Nickel-based Metal Powder Material
镍基高温合金粉末直接激光烧结实验研究
direct gas-heating system
煤气直接燃烧加热系统
direct-heating gas burner
直接加热煤气灯,直接加热煤气燃烧器
A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。
This resulted in a rough and bead-shaped surface, obstructing a smooth layer deposition.
球化的出现妨碍了直接金属激光烧结成形的顺利进行。
Research on the Numerical Simulation and the Structure Optimization of the Tiny-oil Ignition Burner
燃油气化燃烧直接点火的数值模拟和结构优化研究
direct-fired downhole steam generator
直接燃烧式井下蒸汽发生器
Design of direct programming based on CCS DSP external Flash
基于CCS的DSP片外Flash直接烧写设计
a direct result, link, connection
直接的结果、 关系、 联系
not as a direct effect or consequence.
不作为直接影响和结果。
