Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy;
浇注温度对AlSi_9Mg半固态组织的影响
Computer Aided Prediction of Effects of Pouring Temperatureon on the Solidification Structure for Twin-roll Thin Strip;
浇注温度对双辊薄带凝固组织影响的模拟预测
Select the Proper Pouring Temperature of Castings Depending on Mold Filling Simulation;
依据充型模拟确定铸件浇注温度
Effects of Casting Temperature on Al-5Cu Alloy in Indirect Squeezing Casting;
浇注温度对间接挤压铸造Al-5Cu合金的影响
This paper researches the influence of modification process parameters(such as modification agent content, modification temperature, modification time and casting temperature etc.
研究了工业生产Sr变质亚共晶Al-7%Si合金时,变质剂含量、变质温度、变质时间、浇注温度等工艺参数对合金共晶硅细化及其性能的影响。
The SiC foam/SiC_p/Al composites were fabricated by squeeze casting at different casting temperatures and the effect of casting temperature on mechanical properties of composites were investigated.
采用挤压铸造法制备出 SiC 泡沫/SiC_p 混合增强铝基复合材料,研究了不同浇注温度对复合材料力学性能的影响及影响机制。
Effects of Pouring Temperature on the Solidification Microstructure of Single Crystal Superalloy DD6
浇注温度对DD6单晶高温合金凝固组织的影响
How much pouring temperature of EPC should be improved than that of sand mould casting
消失模铸造的浇注温度应比砂型铸造提高多少
Influence of Pouring Temperature and Injection Speed on Microstructure and Hardness of Al-10%Si Alloy
压射速度和浇注温度对Al-10%Si合金组织与硬度的影响
Influence of Pouring Temperature on Primary Austenite in Semi-solid Hypoeutectic High Chromium Cast Iron
浇注温度对半固态亚共晶高铬铸铁初生奥氏体的影响
Effects of Pouring Temperature and Mechanical Vibration to Microstructure and Mechanical Properties of Lost Foam Casting Magnesium Alloy
浇注温度和机械振动对消失模铸造镁合金组织和力学性能的影响
The Effect of Casting Temperature on Continuous Rheo-Extrusion of AZ31 Alloy based on Numerical Simulation
基于数值模拟的AZ31镁合金连续流变成形浇注温度的影响
Effect of Casting Temperature on the Mechanical Properties and Microstructures of the ZL210A Casting Aluminum Alloy
浇注温度对ZL210A铸造铝合金铸态力学性能和微观组织的影响
Effects of Pouring Temperature on Solidification Behavior of Aluminum Alloy Melt with Electromagnetic Stirring
电磁搅拌铝合金热模浇注温度对其凝固行为的影响
Fabrication and Mechanism of Non-dendrite Structure in Semi-solid ZL101 Alloy by Controlled Pouring Temperature
控制浇注温度制备的半固态ZL101合金的非枝晶组织
Effect of Heat Treatment Temperature on Properties of Lightweight Castable
热处理温度对轻质浇注料性能的影响
Effect of Heat Treatment Temperature on Property of Mullite-Bauxite Castable Refractory
热处理温度对莫来石-铝矾土浇注料性能的影响
Effect of Heat Treatment Temperature on Properties of Calcined Flint Clay-Bauxite Castable Refractory
热处理温度对焦宝石-铝矾土浇注料性能的影响
"Different insulation materials such as refractory, refractory castable and fiber insulation materials are used in different zones."
炉子的保温材料根据炉子温度要求不同,分别选用耐火砖,耐火浇注料,纤维保温材料。
In this paper, the temperature field of Sodium silicate sand cores of the machine tool＇ s cast iron is measured.
本文对机床铸铁件水玻璃砂芯在浇注、却过程中的温度场进行了测定。
Research on Golf-Shaped Bubble Bauxite Insulating Castables
高尔夫球型高铝空心球保温浇注料的研制
Rebuilding a Electric Control System of HLZ10C Piston Casting Machine
HLZ10C型活塞浇注机电气控制系统温控改进设计
The influence of the filler-asphalt ratio on the high-and-low-temperature performance of gussasphalt mortar
粉胶比对浇注式沥青胶浆高低温性能的影响
Simulating Analysis of Concrete Steep Slope Dam Thermal Stresses during Hyperthermia Seasons
高温季节浇筑陡坡坝段温度应力仿真研究
