The up - to - date development and manufacturing technology of the wet sintered metal friction materials is reviewed.
综述了湿式烧结金属摩擦片材料的发展现状及其制造工艺，介绍了铜基摩擦材 料的性能及其在国内外的应用情况，提出了制造摩擦材料工艺的研究方向。
To achieve the aim of VOCs removal,the sintered metal materials,the active component CuMn/γ-Al2O3 of catalyst was charged by way of immersion,were tested as adsorption materials.
采用以烧结金属粉末微孔过滤材料为吸附材料和催化剂基体、CuMn/γ-Al2O3为催化剂的烧结金属催化净化装置,可实现对VOCs废气的有效去除。
To achieve the aim of simultaneous removal of dust,SO2 and NOx from the flue gas of coal,the sintered metal materials and the active component V2O5·γ-Al2O3 were tested as filter and carrier.
采用以烧结金属粉末微孔过滤材料为烟尘过滤材料和催化剂基体、V2O5-γAl2O3为催化剂、NH3为吸附剂的过滤原件,可实现对锅炉烟气中烟尘、SO2和NOx的同时去除。
grinding machine for sintered metal carbide, not numerically controlled
烧结金属硬质合金磨削机,非数控式
grinding machine for sintered metal carbide, numerically controlled
烧结金属硬质合金磨削机,数控式
Sintered metal friction materials-Determination of density
GB/T10421-1989烧结金属摩擦材料密度的测定
On the optimization of sound absorption characteristics of porous sintered fibrous metal
烧结金属纤维材料吸声性能优化研究
Sintered metal materials and hard metals--Determination of young's modulus
GB/T5166-1998烧结金属材料和硬质合金弹性模量测定
Sintered metal materials (excluding hard metal)--Tensile test pieces
GB/T7963-1987烧结金属材料(不包括硬质合金)拉伸试样
Sintered metal materials and hard metals--Determination of electrical resistivity
GB/T5167-1985烧结金属材料和硬质合金电阻率的测定
Standard test method for binding strength of sintered metal friction elements
GB/T10430-1989烧结金属摩擦片结合强度测定方法
Sintered metal friction materials-Determination of tension strength
GB/T10423-1989烧结金属摩擦材料抗拉强度的测定
Sintered metal friction materials-Determination of transverse rupture strength
GB/T10422-1989烧结金属摩擦材料横向断裂强度的测定
Sinterd metal friction materials-Determination of apparent hardness
GB/T10425-1989烧结金属摩擦材料表观硬度的测定
Sintered metal materials--Determination of compression strength at room temperature
GB/T6525-1986烧结金属材料室温压缩强度的测定
Sintered metal friction materials-Determination of compression strength
GB/T10424-1989烧结金属摩擦材料抗压强度的测定
Sintered metal bushes--Determination of radial crushing strength
GB/T6804-1986烧结金属衬套径向压溃强度测定法
Permeable sintered metal materials--Determination of open porosity
GB/T5164-1985可渗性烧结金属材料--开孔率的测定
Permeable sintered metal materials--Determination of oil content
GB/T5165-1985可渗性烧结金属材料--含油率的测定
A Research on the Agglomeration Craft of Pure Binary Alloy Powder;
二元合金系纯金属粉末烧结工艺研究
the metallurgy of powdered metals; how to produce solid metal objects from powdered metal by compaction and sintering.
粉末金属的冶金学:如何压束与烧结粉末金属以制造固体金属物体。
