But the kerfs of the air plasma-arc cutting were wider and the cutting surfaces were easily oxidized.
两种方法切割镁合金断面都形成有重熔层,激光切割重熔层厚而致密,与母材交界处无明显的热影响区;空气等离子弧切割重熔层较薄,内部有大量气孔和残渣,切缝中、下部有明显的热影响区,最宽处达50μm。
For the problems of air plasma-arc cutting that has been existing, relativity between parameter of air plasma-are cutting has been analyzed with technical test in order to get best technical parameters and resolute way.
针对空气等离子弧切割存在的问题,通过试验对切割参数的相关性进行了分析,并给出了对不锈钢和碳素钢板进行空气等离子弧切割的最佳工艺参数,提出了工艺上的解决方法。
Usage and maintenance of welding and cutting machines(67)——Usage and maintenance of air plasma arc cutting machine;
焊接与切割设备的使用和维修(六十七)——空气等离子弧切割机的使用与维修
This paper analyzes the basic structure,work principle,usages and notice items of PC-60 air plasma arc cutting machine,and lists the common trouble phenomena,causes and solutions.
分析了PC-60型空气等离子弧切割机的基本结构、工作原因、使用方法和注意事项;例举了其常见故障现象、产生原因和排除方法。
The Research of Single-phase Inverted Air Plasma Cutting Power Supply;
单相逆变空气等离子切割电源的研究
Design of Drive Circuit for Air-plasma-cutting Inverter
逆变式空气等离子切割机的驱动电路设计
Research on the inverter air plasma cutting machine of non-HF contact pilot arc
非高频引弧逆变空气等离子切割机的研究
A lot of harmful fume produced by air plasma cutting has a quite different distribution form, which determine the design for dust removing device.
空气等离子切割时将产生大量对人体有害的烟尘,其烟尘分布的特点决定了降尘装置的设计。
This paper introduced the operation principle of the air-plasma cutting machine, placed emphasis on analyzing operation processes of control circuit board, which offered a maintenance way for us.
介绍了空气等离子切割机的工作原理,重点剖析控制电路板的工作过程,以方便维修。
Cutting Stainless Steel by Recompression of Arc with Air Plasma Water
空气等离子水再压缩弧切割不锈钢
air plasma water injection arc cutting machine
喷水空气等离子弧切机
automatic plasmic arc cutting machine
自动等离子电弧切割机
laser and plasma cutting machine
激光和等离子切割机
Research on Digital Inverted Plasma Arc Cutting Power
全数字逆变式等离子弧切割电源研究
A plasma cutter uses an electrode circuit to spark a stream
等离子切割机使用电极电路产生每秒2万英尺
Numerical Control System for Swing Plasma Cutting Machine
旋臂式等离子切割装置数控系统的研究
Design and Simulation of the NC Plasma Bevel-cutting Mechanism;
数控等离子坡口切割机构的设计及仿真
Study into the Technology of NC Plasma Arc Cutting at High Speed and Accuracy;
高速、高精度数控等离子弧切割技术研究
Study on the Process Parameters Control of Plasma Arc Cutting Variable-thickness Plates;
等离子体弧变厚度切割工艺参数控制研究
Research on the Key Technology in the Development and Design of NC Plasma Cutter;
数控等离子切割机开发设计中的关键技术研究
Research on Soft-switching Mode Power Supply of Arc-welding and Air-plasma-cutting;
逆变式直流弧焊及等离子切割电源的研究
Simulation on Control Strategy of Inverted Plasma Cutting Power Supply
逆变式等离子切割电源控制策略仿真研究
