Elements diffusion near diffusion welding interface of Fe_3Al alloy and Q235 low-carbon steel;
Fe_3Al合金与Q235钢扩散焊界面元素的扩散
Study of interface behavior in weld zone of diffusion welding for composite;
扩散焊接条件下复合材料接合区界面行为研究
Study on no-interlayer diffusion welding technology of Al-Li alloy;
Al-Li合金无中间层扩散焊接工艺研究
Molecular dynamics simulation of the diffusion bonding and tensile behavior of a Cu-Al interface;
铜-铝扩散焊及拉伸的分子动力学模拟
Welding characteristics and technology of titanium-steel diffusion bonding;
钛-钢扩散焊的特点及焊接方法
Phase transformation diffusion bonding technology for titanium alloy to stainless steel;
钛合金与不锈钢的相变超塑性扩散焊工艺
Microstructure analysis of diffusion brazing joints of Al_2O_3-TiC composite ceramic to stainless steel;
Al_2O_3-TiC复合陶瓷与不锈钢扩散钎焊接头组织分析
Analysis of interfacial structure of Ti/Cu/Ti diffusion brazing heated with oxy-acetylene flame;
Ti/Cu/Ti火焰加热扩散钎焊界面组织分析
The microstructure and forming mechanism of diffusion brazing interface of TiAl alloy and 42CrMo;
TiAl合金与42CrMo扩散钎焊的界面组织及形成机理
Optimization and design of thickness of bearing steel layer diffusion bonding on titanium alloy surface;
钛合金表面扩散焊接轴承钢硬化层厚度的优化设计
FEM analysis of quenching process for multi-layer diffusion bonding materials;
扩散焊接多层材料淬火过程的有限元分析
Study on Diffusion Bonding Process of Metal Matrix Composites;
金属基复合材料的扩散焊接工艺研究
Effect of electroless Cu-Mn coating on diffusion welding strength of Q235 material;
Cu-Mn化学镀层对Q235的扩散焊接强度的影响
Preliminary study on hot isostatic pressing diffusion welding for China low activation martensitic(CLAM) steel;
中国低活化马氏体钢CLAM热等静压扩散焊接初步研究
According to the welding process and feature of diffusion welding,the diffusion welding procedure of Ti6Al4V titanium alloy plate and 00Cr18Ni13 stainless steel net was detailedly investigated.
根据真空扩散焊接过程和特点,详细研究了TC4钛合金板与00Cr18Ni13不锈钢网的直接真空扩散焊接工艺。
To satisfy the strict limit for high-welded region rate and micro-deformation rate, which is required for the diffusion welding used in the technology of delaminating entity manufacturing, a new type of precision diffusion welding equipment is developed.
针对分层实体制造技术要求的高焊合率及微变形量,设计制造了一台精密扩散焊机。
Research of Transient Liquid Phase Joining Machine for Oil-pipeline Welding;
管道的瞬时液相扩散焊(TLP)焊机研究
Research on A-TIG Welding and Diffusion Bonding of Magnesium Alloys;
镁合金活性TIG焊和真空扩散焊的研究
Testing techniques of brazing and diffusion welding quality of liquid rocket engine
液体火箭发动机钎焊、扩散焊质量检测技术研究
Study on Diffusion Bonding Process of Metal Matrix Composites;
金属基复合材料的扩散焊接工艺研究
Ultrasonic Testing and Single Processing of TiAl/40Cr Diffusion Bonding;
TiAl/40Cr扩散焊接头超声检测及信号处理
Vacuum Diffusion Bonding of SiC Particulate Reinforced LD2 Matrix Composite;
SiC颗粒增强LD2复合材料的真空扩散焊
Study on welding process of Fe-Cr-Al alloy vacuum diffusion bonding
FeCrAl合金材料真空扩散焊工艺实验研究
Study on the microstructure of transint liquid phase diffusion bonding joint of 16Mn steel
16Mn钢的瞬间液相扩散焊接头微观组织
Vacuum diffusion welding of dissimilar materials of M2/40Cr
M2/40Cr异种材料真空扩散焊的分析
Investigation on Elements Inter-diffusion in Reaction Layer During Hip Between Corrosion-resistant Alloy and Carbon Steel
耐蚀合金/碳钢热等静压扩散焊接反应层元素互扩散规律研究
Joints performance of diffusion bonding between pure Cu and stainless steel and dynamic analysis of atomic diffusion
纯铜与不锈钢扩散焊接头性能及原子扩散动态解析
Study on Vacuum Diffusion Bonding Technique between Magnetic Refrigerant Material Gd and Cu、Al;
磁制冷材料Gd与Cu、Al的真空扩散焊工艺研究
Study on Pulse Pressuring Diffusion Bonding Processing for Stainless Steel and Titanium Alloy;
不锈钢与钛合金脉冲加载扩散焊接工艺研究
Study on Vacuum Diffusion Welding of YG20 and Invar Alloy
YG20与因瓦合金真空扩散焊接技术的研究
Novel Process of Active-Transient Liquid Phase(A-TLP) Bonding for Aluminum Matrix Composite
铝基复合材料的活性液相扩散焊新工艺
Experimental Research on Vacuum Diffusion Bonding of PDC Bit
PDC钻头真空扩散焊接工艺正交试验研究
Interface behavior of TLP between chromium-copper alloy and stainless steel
铬青铜与不锈钢瞬间液相扩散焊接界面行为
Transient Liquid-phase Bonding with Two-step Heating Process of TP304H/12Cr2MoWVTiB Dissimilar Steel Pipe
TP304H/12Cr2MoWVTiB异种钢管的双温瞬时液相扩散焊工艺