Design method research of large-size aluminium stretcher by means of FEM;
基于有限元的大型铝型材拉伸矫直设备设计方法研究
The variation of rail height derived from roll straightening;
辊式矫直轨高变化及其研究
To investigate the deformation behavior of plate steel during roller leveling in depth,the curvature integration by elastic-plastic differences was introduced to simulate and analyze the effect of plastic deformation rate on the leveling results.
为了深入研究辊式矫直过程的变形特点,采用弹塑性差分的曲率积分方法,模拟研究塑性变形率对矫直效果的影响。
The principle of contact angle and curvature during the roller leveling process was investigated,as well as the effects of angle and some special points on curvature and the effects of curvature on the angle.
研究了在辊式矫直过程中接触倾角与曲率的变化规律,采用曲率积分的方法主要研究了接触倾角、特殊位置与曲率相互耦合关系。
On the basis of the problem that the tension leveler has a short service life because of work roll s severe abrasion in the pickling line and tandem cold mill(PL-TCM),and in combination with the theoretical analysis and real application in production,the levele s set elongation rate and work roll s insert depth were optimized.
针对酸轧联合机组中拉伸矫直机设备存在的由于工作辊磨损严重导致的使用周期偏短的实际问题,结合理论分析结果和生产现场的实际使用情况,对拉伸矫直设定延伸率和工作辊设定插入深度进行了优化;改进了相应的拉伸矫直工艺制度。
Research on Bearing Capacity of 6000T Stretcher Leveler;
6000吨拉伸矫直机承载能力研究
Research of Select Type and Design for Strip Continuous Tensile Straightening Units
带钢连续拉伸矫直机选型与设计研究
The strip deformation of simulation model established in tension levelling
带材拉伸弯曲矫直变形仿真模型的建立
Application of Profibus Technology in Tension-Bending Straightening Machine
Profibus控制技术在拉伸弯曲矫直机组中的应用
Multi-rigid-body Dynamic Simulation of the Bending Roller Unit of Direct-driving Stretcher Leveller
直接传动型拉伸弯曲矫直机弯曲辊系多刚体动力学仿真研究
"The leveller consists of straightener, tension rolls and driving device, basement and speedy roll change device. "
拉伸弯曲矫直机由矫直机、张力辊及其传动装置、底座和快速换辊装置部分组成。
The Research on Strip of Tension Leveling Theory and Simulation Based on Improved the Shape;
基于改善板形的带材拉伸弯曲矫直理论研究及其仿真
Study on Aided-Design of the Tension Leveling of Metal Strip and Its Control Simulation;
拉伸弯曲矫直机辅助设计与控制仿真系统的研究与开发
Study on Process Parameter for the Tension Leveling of Metal Strip with the Finite Element Method;
基于有限元方法的金属带材连续拉伸弯曲矫直工艺参数研究
seven-roll Abramsen miachine
艾布拉姆森七辊矫直机
Abramsen straight ener
阿布拉姆森型矫直机
act of stretching or straightening out a flexed limb.
拉伸或矫正一个弯曲的肢体。
The Tension leveller is used to improve strip shape and mechanical properties.
本机组采用拉伸弯曲矫直机的主要用途是改善镀锌带材板形及机械性能。
The Accident Analysis and Transformation Study on the Stretcher Straightener;
拉伸弯曲矫正机设备故障分析及改造研究
Tension and Elongation Control of 1450mm Tension Formation Leveler System
1450mm平整拉矫机组系统张力及延伸率控制
Research on Tensile Test in the Condition of Weld Line Placed Perpendicular to Tensile Direction
焊缝垂直拉伸方向的拼焊板单向拉伸实验研究
five-roll Abramsen machine
艾布拉姆森式五辊矫直机
To release(a bow, for example)from flexure or tension.
伸直放开弯曲或拉紧的（如，弓）
