Wear-resistance of Metallic Mold Centrifugal Casting TiAl Based Alloy;
金属型离心铸造TiAl基合金耐磨性研究
In this paper,low-hardness high chromium roll was produced by means of designing reasonable centrifugal casting process and heat treatment method.
概括介绍了太钢轧辊公司利用5t中频炉、卧式工频炉、卧式离心机、低温电加热处理炉等设备,通过制订合理的离心铸造工艺和热处理工艺生产低硬度高铬铸铁轧辊,同时与热连轧磨辊间制订合理的磨削制度,满足了太钢热连轧的轧钢使用要求。
The SiCp/Al alloy matrix composite was obtained through a new type of methodelectromagnetic centrifugal cast.
采用一种新型的工艺制备SiC_P/Al合金基复合材料,即在传统离心铸造工艺条件下引入稳恒直流磁场,利用工艺中的电磁搅拌作用使离心铸造复合材料的偏聚情况得以改善,并探讨了稳直流磁场对颗粒分布均匀性的作用机理。
Based on rapid prototyping technology the silicon rubber mold for centrifugal casting is conveniently made.
采用快速原型技术 ,可以方便地制造硅橡胶离心铸造模 ,适用于生产外形复杂的低熔点合金微小铸件。
Technical Research of Centrifugal Casting of Silicon Rubber Model and Design Simulation of Vulcanizing Equipment;
硅橡胶离心铸型工艺研究及铸型固化机设计仿真
Cast-iron pressure pipe centrifugally cast in sand-lined molds
GB/T3421-1982砂型离心铸铁管
An Example of Recovery of Coated Die for Centrifugal Cast Small-Bore Pipes
涂料金属型离心铸造小口径管铸型再生一例
Research on Coating Process for Cold-mould of Centrifugal Casting Cast Iron Roller
离心铸铁轧辊冷型涂料涂敷工艺研究
FEM Simulation of Centrifugal Moldfilling and Determination of Interfacial Heat-Transfer Coefficient between Casting and Mold
离心充型凝固有限元模拟及铸件—铸型界面换热系数确定
INFLUENCE OF Cr,As ON METALLOGRAPHIC STRUCTURE OF WATER-COOLED METAL-TYPE CENTRIFUGAL CASTING NODULAR-CAST-IRON PIPE
Cr、As对水冷金属型离心铸造球墨铸铁管金相组织的影响
Determination of the Temperature Field in Centrifugal Cast Pipe Mould of Hot-mould Process
热模法离心铸管管型温度场的测试研究
Study on Mold Filling and Deffect of Casting of Titanium Alloys under Centrifugal Force Field;
离心力场下钛合金充型流动及铸造缺陷的研究
Static finite element analysis on cast case of large-scale centrifugal compressor
大型离心式压缩机铸造机壳的静态有限元分析
centrifugal casting pipe for stay bolt
贯穿螺栓离心铸造管
high frequency auto centrifugal casting furnace
高频自动离心铸造炉
horizontal arm hanging type centrifugal casting machine
悬臂卧式离心铸造机
Arsenal process
阿塞诺炮筒离心铸造法
cylindrical mould (excl. of graphite or other carbon and of ceramics), for centrifugal moulding machines
离心铸模机圆柱型模(石墨或其他碳化物及陶瓷的型模除外)
Centrifugal casting ductile iron pipe
GB/T13295-1991离心铸造球墨铸铁管
The permanent mould centrifugal casting process used for production of valve seat for internal combustion engine and the material of casting was described.
叙述金属型离心铸造内燃机气门座的工艺方法和材料特点。
Improvements on the Software System for Simulations of Centrifugal Mold-Filling and Coupled Heat-Transfer Processes of Titanium Castings;
钛合金离心铸造充型与传热过程耦合模拟软件系统的改进
Approach to Manufacturing Technology for Silicone Rubber Moulds for Low Melting Point Alloy Jewelry
低熔点合金饰品离心铸造中硅橡胶型的制作工艺