Analysis on causes to corner cracks in Q345B continuous casting slab;
Q345B钢连铸坯角裂形成原因分析
Two-dimensional heat transfer mathematical model during thermal process for rough rolling of continuous casting slab;
连铸坯粗轧热过程二维传热数学模型
Solidification process research of continuous casting slab;
连铸坯凝固过程温度模拟系统的开发和研究
Practice of production heavy rail by using continuous casting billet;
用连铸坯生产重轨的研究与实践
The paper concerns the process parameters of continuous casting and cold-drawing of 12Cr2MoVWTiB seamless steel pipe for high pressure boiler,proposes the feasibility of produced high pressure boiler pipe of 12Cr2MoVWTiB steel by continuous casting billet,the surface quality and mechanical properties of the boiler pipe can meet the demand of standard GB5310-1995.
介绍了12Cr2MoVWTiB钢高压锅炉管的管坯连铸和冷拔生产工艺参数,提出采取连铸坯生产12Cr2MoVWTiB钢高压锅炉管是完全可行的,表面质量和机械性能等方面都能满足GB5310—1995的要求。
The production of 20 steel continuous casting billet for seamless tube with process of converter plus simple refine plus continuous casting is introduced,measures was adopted including slowly-drawing to increase carbon,argon bottom-blown and feeding wire to ladle,protecting casting and reasonable control of drawing speed.
介绍了唐山国丰钢铁有限公司第一炼钢厂采用转炉—简易精炼—连铸工艺流程试生产供轧制无缝钢管用20钢连铸坯的生产情况,采取低拉增碳、钢包底吹氩及喂丝、保护浇注、合理控制拉速等有效措施,解决了生产中存在的质量问题,生产出符合标准及用户要求的优质20钢连铸坯。
Enrichment of residual elements in continuously cast slabs and medium Plates
钢中残余元素在连铸坯和热轧板中的富集行为
The solidifying character and the factor of affecting the oscillation mark depth of continuously cast slab for 18-8 stainless steel are described in brief.
简述了18-8不锈钢的凝固特点以及影响连铸坯振痕深度的因素。
Effect of Electric Pulse Inoculation to Tundish Metal on Structure of Electrical Sheet Steel Concasting Billet;
中间包钢水电脉冲孕育处理对电工钢连铸坯组织的影响
Brittleness of 0.11C-1.27Mn-0.02Nb-0.01Ti Microalloy Steel Concasting Billet at Elevated Temperature;
0.11C-1.27Mn-0.02Nb-0.01Ti微合金钢连铸坯的高温脆化
Advance in Research on Mathematic Model of Micro- and Macrosegregation in Concasting Billet;
连铸坯微观及宏观偏析数学模型的研究进展
Cause of Corner Crack of Continuous Cast Billet in Laiwu Steel No.5 Continuous Casting
莱钢5号连铸机连铸坯角部裂纹成因分析
Study on Corner Sink and Vertical Cracks of CC Steel Billet
连铸坯角部凹陷及纵向裂纹的研究
Production practice on casting the round tube blank of steel 20 with round tube blank continuous caster
圆坯连铸机浇铸20钢铸坯的生产实践
Study on solidification of round billet horizontal continuous casting and quality of casting blank
水平连铸圆坯凝固及铸坯质量的研究
Analysis on Causes of Slab Stagnating in CC and Their Improvement Measures
板坯连铸“滞坯”原因分析及改进措施
Measurement of the Solidified Shell Thickness in the Secondary Cooling Zone of Continuous Casting of Bloom
大方坯连铸二冷区凝固坯壳厚度测试
Continuous casting mould hydraulic vibration devices of square billet(round billet)/rectangular billet
大方坯(圆坯)/矩形坯连铸结晶器液压振动装置
Numerical Simulation of Mould/billet Temperature and Concentration Field in the Continuous Casting of Round Billet;
圆坯连铸结晶器/铸坯温度场与浓度场数值模拟
Optimization of secondary cooling scheme of combined caster
方/板坯连铸机浇铸矩形坯二冷制度优化
Experimental Study on Transient Friction Behavior Between Mould and Strand in Slab Continuous Casting
板坯连铸结晶器/铸坯瞬态摩擦行为的实验研究
The Research on Submerged Nozzle Nod in Continuous Casting Tube
浇铸管坯连铸用浸入式水口结瘤研究
Comparison and Choice of the Temperature Maintaining Equipment in the Thin Slab Continuous Casting and Rolling
薄板坯连铸连轧生产线中间坯保温设备的比较
Analysis and Improvement on Surface Quality of CC Round Billet for Pipe－rolling with Mandrel Mill
连铸连轧圆管坯表面质量分析与改进
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
薄板坯连铸连轧（CSP）轧制区组织模拟
THE PRODUCING STATUS OF THIN SLAB CONTINUOUS CASTING AND ROLLING IN CHINA
我国薄板坯连铸连轧工艺的生产现状
Introduction to converter-thin slab casting and rolling project in WISCO
武钢转炉-薄板坯连铸连轧工程简介
The Effect of Cross Section Area of Casting Bar on the Quality of Copper Rod for Electrical Application of SCR Continuous Casting & Rolling
铸坯截面积大小对SCR连铸连轧电工用铜线坯质量的影响
Study of Solidification Heat Transfer Mathematical Model for Dynamic Withdrawal Process in Slab Continuous Casting;
板坯连铸动态拉坯过程凝固传热数学模型研究
