Analysis of pseudospark pulsed electron beam shape in transmission;
赝火花脉冲电子束传输中束斑分析
Numerical analysis of material surface thaw depth under pulsed electron beam irradiation;
脉冲电子束照射下材料表面熔化深度的数值解析
Influence of pulsed electron beam polishing modification on surface morphologies of TC21 titanium alloy
脉冲电子束抛光改性处理对TC21钛合金表面形貌的影响
High power density electron beams generated by multiplate pseudospark discharge chamber,have been used to bombard various kinds of steel targets such as 45~#, 65Mn, T8, 9Cr18, GCr15, etc, and study its applications for modification of metal surface.
利用多极板赝火花放电装置产生的高功率脉冲电子束对不同类型的钢, 如 45#, 65Mn,T8, 9Cr18和GCr15等进行轰击, 研究其在金属材料表面改性中的应用。
High power density electron beams generated by multiplate pseudospark discharge chamber,have been used to bombard various kinds of steel targets such as 45#, 65Mn, T8, 9Cr18, GCr15, etc, and study its applications for modification of metal surface.
利用多极板赝火花放电装置产生的高功率脉冲电子束对不同类型的钢,如45#,65Mn, T8,9Cr18和GCr15等进行轰击,研究其在金属材料表面改性中的应用。
Morphologies of Mold Steel SKD11 Surfaces Modified by High Current Pulsed Electron Beam Irradiation;
模具钢SKD11强流脉冲电子束表面处理的形貌研究
Biomedical Materials Modification by High Current Pulsed Electron Beam;
医用金属材料的强流脉冲电子束表面改性研究
Effect of high current pulsed electron beam treatment on microstructure and wear resistance of AZ91 magnesium alloy
强流脉冲电子束处理AZ91镁合金的显微结构及磨损性能变化
33 MnO_3 grain films have been grown by pulsed electron beam deposition technology,and their magnetic and electronic transport properties investigated in detail.
采用脉冲电子束沉积技术,在Si(100)单晶衬底上沉积庞磁电阻La0·67Ca0·33MnO3颗粒薄膜,并对它的磁学性能和电学输运性能进行了表征。
La-Sr-Cu-O thin films on Si(100) substrates have been grown by pulsed electron beam deposition technique.
采用脉冲电子束沉积(PED)技术在Si(100)衬底上生长La_Sr_Cu_O薄膜,在750℃生长温度下获得具有有序纳米结构的表面形貌。
The surface microstructure,phase structure and property of the test samples were studied with high current pulsed electron beam(HCPEB)treatment on surfaces of carbon steel T8,die steel D2 and magnesium alloy AZ91HP as test materials.
以T8钢、D2模具钢和AZ91HP镁合金为试验材料,利用强流脉冲电子束(加速电压为27 keV,脉冲持续时间约为1μs,能量密度约为2。
The rapid surface alloying of AISI 316L stainless steel by high current pulsed electron beam(HCPEB) was investigated.
利用强流脉冲电子束对不锈钢表面进行了快速钛合金化。
B-dot monitor for intense electron beam measurement
用于测量强流脉冲电子束的B-dot
Surface modification of mold steel SKD11 by high current pulsed electron beam
SKD11模具钢的强流脉冲电子束辐照改性
Biomedical Materials Modification by High Current Pulsed Electron Beam;
医用金属材料的强流脉冲电子束表面改性研究
Surface Modification of Pure Mg, Mg Alloys AZ31 and AZ91HP by High Current Pulsed Electron Beam;
纯镁及镁合金强流脉冲电子束表面改性
Mechanism and Numerical Simulation of Materials Modification by High Current Pulsed Electron Beam;
强流脉冲电子束材料改性机制及数值模拟
Surface Modification of Pure Aluminum by High Current Pulsed Electron Beam;
纯Al材强流脉冲电子束表面改性的研究
Two-dimensional Numerical Simulation of Materials Surface Modification by High Current Pulsed Electron Beam (HCPEB);
强流脉冲电子束材料表面改性的二维数值模拟
Three Dimension Numerical Simulation of Materials Modification by High Current Pulsed Electron Beam;
强流脉冲电子束材料改性三维数值模拟
Surface Modification of Hypereutectic Al-Si Alloy by High Current Pulsed Electron Beam
过共晶铝硅合金强流脉冲电子束表面改性
Friction and Wear Properties of 40Cr with HCPEB Surface Treatment
强流脉冲电子束处理下40Cr的摩擦磨损性能研究
Surface Modification of High-speed Steel M2 by HCPEB
高速钢M2强流脉冲电子束表面改性研究
Alloying Al on the Surface of Magnesium AZ31 Alloy by High Current Pulsed Electronic Beam
AZ31镁合金表面强流脉冲电子束铝合金化研究
The Study of High Tc Superconductor Films Deposited by Pulsed Electron Beam System
脉冲电子束系统沉积高温超导薄膜研究
Surface Stress Characteristics in Pure Nickel after High-Current Pulsed Electron Beam Irradiation
强流脉冲电子束作用下纯镍表面的应力特征
Surface morphology of Si single crystal induced by HCPEB bombardment
强流脉冲电子束轰击对单晶Si表面形貌的影响
Surface Modification of AZ31 Mg Alloy by High Current Pulsed Electron Beam
AZ31镁合金强流脉冲电子束表面改性研究
New Equipment for Surface Modification of Material--High-current Pulsed Electron Beam System(Electron Cannon)
一种新型的材料表面改性装置——强流脉冲电子束(电子炮)
Microstructures of Metal Materials Induced by High Current Pulsed Electron Beam;
强流脉冲电子束作用下金属材料的微观结构状态
