Using the self-made XMH-160 linear friction welder,the influence of friction time on friction deforming of TC4 alloy was studied in linear friction welding.
用自制的XMH-160型线性摩擦焊机,试验研究了TC4钛合金线性摩擦焊的摩擦时间对摩擦变形量的影响,结果表明,其变形量随摩擦时间的增加近似呈指数关系增大。
A self-made friction tester was used to investigate the tribological properties of SUS304 metastable stainless steel against DC53 under the condition of friction coupling deformation.
利用自制的摩擦耦合变形试验装置,对SUS304亚稳奥氏体不锈钢带在摩擦耦合变形条件下与淬火回火DC53冷作模具钢的往复摩擦性能进行了研究,分析了带试样的塑性变形规律及相变特征,并对其磨损形貌进行了SEM观察。
Tribological Properties of Austenitic Stainless Steel under the Condition of Friction Coupling Deformation
摩擦耦合变形条件下奥氏体不锈钢的摩擦学性能研究
friction-twist draw-texturing machine
摩擦加捻拉伸变形机
Resonances of Coupled Vibration of Dry-friction Damper Turbine Blades;
干摩擦叶片耦合振动的共振响应研究
The design of the SUS304 coupled friction machine measurement-control system
SUS304耦合摩擦实验机测控系统的研究
Study on the thermal-structural couple field of sliding friction process based on ANSYS
基于ANSYS的滑动摩擦热结构耦合分析
Finite Element Analysis of Thermal-structural Couple Field of Sliding Friction
滑动摩擦热-结构耦合的有限元分析
Study on the Friction Behavior of Niti Shape Memory Alloy under Various Temperatures;
镍钛形状记忆合金变温下的微观摩擦性能研究
Deformation and Wear Behaviors of the Mg-Y-Zn Alloys
高强度Mg-Y-Zn合金的变形和摩擦磨损行为研究
Study on the Friction and Wear Properties and the Thermal Deformace of Copper Alloy
铜合金摩擦磨损性能及热变形行为研究
Study on friction coefficient in the compression at high temperatures of ultrahigh strength Al-Zn-Mg-Cu alloy produced by spray deposition
喷射沉积超高强铝合金热变形摩擦行为研究
NUMERICAL ANALYSIS ON THE RESIDUAL DISTORTION OF Al ALLOY SHEET AFTER FRICTION STIR WELDING
铝合金薄板搅拌摩擦焊接残余变形的数值分析
The research on the wet multi-disc griction brake fynamic fesign
湿式摩擦离合器多场耦合动态设计方法
The Friction Stir Processing and Fabricating Surface Composites of Thixoformed AZ91D Mg Alloy;
触变成形AZ91D镁合金的搅拌摩擦加工及表面复合化
Friction and Wear Behavior of Bionic Coupling Grey Cast Iron Processed by Laser;
激光仿生耦合处理灰铸铁的摩擦磨损性能
Coupling Researches on Tribological and Dynamical Behaviors of the Crankshaft-Bearing System of Internal Combustion Engines;
内燃机曲轴-轴承系统摩擦学动力学耦合研究
Coupling Research on Tribology, Stiffness and Strength of Crankshaft-bearing System;
曲轴—轴承系统摩擦学、刚度和强度的耦合研究
Analysis on Coupling of Friction and Flexible Multi-body Dynamics in Multi-link Internal Combustion Engine;
多杆内燃机摩擦耦合柔性多体动力学分析
Study on Friction and Wear of Compacted Graphite Iron with Biomimetic Coupling by Cast-in Process;
镶铸仿生耦合蠕墨铸铁摩擦磨损性能的研究
