hot isotatic pressure diffusion welding是什么意思

用法例句

Effects of process parameters on HIP sintered 3Y-TZP ceramics behavior;

工艺参数对热等静压制备的3Y-TZP陶瓷性能的影响

Progress in Research on HIP Diffusion Bonding of Be/Cu-alloy;

铍与铜合金热等静压扩散连接研究进展

Effects of HIP Temperature on Microstructure of FGH96 Superalloy;

热等静压温度对FGH96粉末高温合金显微组织的影响

Application of hot isostatic pressing in superhard tools manufacture;

热等静压(H IP)技术在超硬工具制造中的应用

Preliminary study on hot isostatic pressing diffusion welding for China low activation martensitic(CLAM) steel;

中国低活化马氏体钢CLAM热等静压扩散焊接初步研究

Investigation on hot isostatic pressing and heat treating process for fine grain cast K403 alloy;

细晶铸造K403合金热等静压及热处理工艺研究

TiB2-TiC ceramic matrix composites were fabricated by in situ synthesis under hot isostatic pressing (HIP) with 3TiH2-B4C and 11TiH2-3B4C being the raw materials, respectively.

以3TiH2 B4C和11TiH2 3B4C系统为原料,采用热等静压原位合成工艺制备TiB2 TiCx复相陶瓷材料。

Be was jointed to CLAM stainless steel by hot isostatic pressing (HIP) diffusion bonding with AgCu28 alloy as interlayer.

以AgCu28合金作为过渡层材料,采用热等静压(HIP)方法进行Be/CLAM钢(中国低活化马氏体钢)的扩散连接。

In this paper, TiB2-TiCx composites are fabricated with TiH2 and B4C powders by in situ synthesis under hot isostatic pressing (HIP).

本文在热等静压条件下，采用原位合成技术，以TiH_2和B_4C为原料，制备TiB_2-TiC_x复相陶瓷材料。

HA(ZrO2)-316L stainless steel fibre asymmetrical functionally gradient biomaterial(FGM) was successfully fabricated under 1100℃ by low pressure hot isostatic pressing(HIP) technique.

用低压热等静压方法在1100℃下制备了HA(ZrO2)-316L不锈钢纤维非对称FGM,其中316L不锈钢纤维含量按体积比20%→15%→10%→5%呈非对称梯度变化。

According to the problems of time for waiting hot-water encountered in using domestic water heaters,the reasons of time for waiting hot-water were analyzed systematicly and some solutions were put forward.

根据太阳能热水器在使用过程中出现的热等待(即冷水)问题,系统地分析了产生热等待问题的原因,并给出解决方法。

Investigation on the destruction of chemical weapon fillers abandoned by Japan in China using thermal plasma technology;

热等离子体技术销毁日本遗弃化武红弹装填物研究

The co-cracking of natural gas and coal by a 15kW nitrogen(N_2 flux:2m~3·h~(-1)) thermal plasma jet was investigated experimentally.

利用相对丰富的天然气 (NG )和煤炭资源 ,采用热等离子体技术制备乙烯和乙炔是很有前途的方法之一 。

The effects of swirling flow in the DC arc plasma torch nozzle exit on the heat transfer and flow patterns inside a thermal plasma reactor were simulated when with a counter-flow gas injection, to study the atmospheric pressure thermal plasma advanced materials processing.

以大气压气体放电热等离子体先进材料加工为背景,研究了当等离子体发生器出口处存在旋流流动时,旋流效应对有反向载气注入条件下等离子体反应器内传热与流动特性的影响。