The hot-spray-mending of iron ladle in Chang Steel is introduced.
介绍了长钢应用的铁水罐热喷补技术,罐体修补时间由原来的2～3天缩短为30min左右,罐体运行寿命大大延长,并且极大地节约了筑罐成本和减轻了工人的劳动强度,取得了良好的经济效益和社会效益。
Applying gunning mix to the blast furnace in themal state is one of the most important measures that are used for prolonging the life-span in the last age of a blast furnace.
高炉使用热态喷补料是高炉炉役后期为延长高炉一代寿命而采取的重要措施之一。
Development and Application of Unshaped Refractory for Gunning Repair of Lime Kiln Lining;
采用不定形耐火材料喷补修复石灰窑炉衬的研制及应用
Application study of gunning on 90t ladle slag line at Baotou Steel;
包钢90t钢包渣线喷补工艺的应用研究
Application of remote hot gunning technology to the No1 BF at Baoshan Iron & Steel Co.;
遥控喷补技术在宝钢1号高炉上的应用
Hot-spray repair technology development in copper-smelting furnace;
铜冶炼炉热喷补技术开发
Through the research and practice of the gunned refractory of an industrial furnace lining and spray repair technology, it is fully proven that the prepared LGJ- 01 gunned refractory has the characteristics of little linear change, good binding properties, lower rebounding rate and excellent heat shock stability.
介绍了工业窑炉内村喷补料及喷补工艺的研究及实践，充分证明LG－01喷科料具有烧后线变化小、粘结强度高、反弹率低、热震稳定性好等特点。
1 BF cooling stave in small areas,furnace shutdown,spray repair,and furnace lining was used to BF inwall,which save a lot of investment and time in comparison with bricklaying repair.
临钢1号高炉在冷却壁局部损坏时,停炉对内壁进行喷补。
The paper discussed the usage scope,procedure of hot repair methods.
阐述了热补法的使用范围、工作程序 ,根据使用经验与沥青路面传统的养护方法进行比较 ,总结出热补设备的优缺
On the basis of the features of silicious hot repair material and practice of the author s company this paper formulated a scientific and reasonable hot repair plan to hold the emergency of arch collapse resulting from attacking by alkaline vapor,which prolong the life of furnace and achieve good economic effect.
结合公司生产实际,根据特种硅质热补料性能特点,针对玻璃窑炉长期受高温碱蒸气侵蚀,碹顶出现坍塌的危急情况,及时研究制订了科学合理的热修补方案,延长了窑炉使用寿命,取得了较好的经济效果。
Application of Spray Repair and Furnace Lining Technique in NO.1 BF at Lingang
喷补造衬技术在临钢1号高炉的应用
Application of the Gunning and Lining Technique for No.3BF in Baotou Steel
喷补造衬技术在包钢3~#高炉上的应用
Application of remote hot gunning technology to the No1 BF at Baoshan Iron & Steel Co.
遥控喷补技术在宝钢1号高炉上的应用
PRACTICE OF GUNNING LINING MAKING IN THE UPPER PART AND THROAT OF4#BLAST FURNACE OF HAN STEEL
邯钢4#高炉炉身上部及炉喉喷补造衬实践
Application of the Off-line Gunner of Insert Tube for RH Vacuum Refining Furnace
RH真空精炼装置插入管离线喷补机的应用
MINSCAN SYSTEM, Laser Profile Measurement, BOF program, and other technology.
电炉自动喷补设备,激光测厚系统,转炉维护技术等.
reheat jet aircraft
补燃加力式喷气飞机
Simulation Research on Patching Coke Oven Based on FLUENT
焦炉修补喷射的FLUENT仿真研究
The Study of 6-DOF Painting Robot's Interpolation Algorithm
六自由度喷涂机器人插补算法的研究
The Study of the Compensition About the Weighting Sensor in the Series Bunker PCI System
串联罐式喷煤系统称重传感器的补偿研究
Secondary air tuyere: aluminum alloy shutter,the surface was electro-sprayed by epoxy resin.
补风口：采用铝合金百叶窗，表面环氧树脂喷涂。
Application of on-line spraying technology in repair of firebricks liner of sulphur-burning furnace
焚硫炉耐火砖内衬在线喷涂修补技术的应用
Micro-sprinkler irrigation is the way of good water-saving irrigation for pear trees gardens at present, which makes, up and overcomes disadvantages in the practice of trickle and sprinkler irrigation.
微喷灌是目前梨园较好的节水灌溉方式，它弥补和克服了滴灌和喷灌在果园应用中的许多弊病。
Research on application and algorithm for interpolation points posture in virtual demonstration system of painting robot
喷漆机器人虚拟示教系统中喷枪轨迹插补点位姿的算法及应用研究
Specially suitable for zinc patching of weld seam in tube welding line, and capacitor spray.
本套设备适合于高频焊管生产线上进行焊缝的补锌及电容喷涂。
Application of Bolting-mesh-beam, Shotcrting and Anchorage Combined System in rectangle Tunnel
锚网梁、喷混凝土、锚索补强联合支护在矩形巷道中的应用
Research on Image Inpainting for Jet Printing Images Based on the Total Variation Algorithm Model;
整体变分算法在数码喷墨印花图像修补中的应用研究
Identification of compounds in fruits of Psoralea corylifolia by HPLC-MS
高效液相色谱-电喷雾-质谱法分析补骨脂中化学成分
