Development of distributed temperature supervisory system for driving device of hot strip mill;
热带轧机传动设备分布式温度监测系统的开发
The main technological pacckages available for high speed control of hot strip mills are described.
描述了用于热带轧机高速控制的主要工艺软件包。
In accordance with the problem that products produced by traditional hot strip mill have bad quality, this paper puted forward that the mill without control means for strip shape and strip crown can be transformed into workroll cross sliding type mill.
针对我国传统热带轧机存在的产品质量不良问题，提出了可将尚无板形、板凸度控制装置的轧机改为可横移式轧机，并配以液压弯辊，接轴改为伸缩式万向接轴，同时逐步增设必备的检测装置、控制系统等。
Optimization and application of CVC work roll contour on 2250 hot strip mills;
2250CVC热连轧机工作辊辊形改进与应用
Research and application on looper control system of 1580mm hot strip mill in the 3rd Hot Rolling Plant of WISCO
武钢三热轧1580mm热连轧机活套控制系统研究及应用
CVC(continuously variable crown) roll wear model for 1700 hot strip mill was researched and the factors affecting roll wear were analyzed.
研究了国内某厂1700热连轧机CVC轧辊磨损模型,分析了影响轧辊磨损的各种因素。
Effect of TMCP on Structure and Performance of Middle Carbon Cold Heading Steel;
热机轧制对中碳冷镦钢组织和性能的影响
,grain refinement can be achieved by thermal mechanical controlled rolling(TMCP) in metastable austenite region and new grain growth is restrained by using the practice of holding the transfer bar and rolling at low finish rolling temperature to allow γ/α phase transformation in non-recrystallization region.
沙钢集团于2006年建成现代化宽厚板生产线,采用当今世界上诸多先进的工艺装备和工艺技术,亚稳态奥氏体区热机轧制实现晶粒细化,靠中间坯待温时间及未再结晶区γ/α相变较低终轧温度抑制新晶粒成长。
Selection on Dust Plan of AISC 1780 Hot Finished-rolling Mill
鞍钢1780热轧精轧机除尘方案的选择
Research on Finishing Mill Roll Change Automatic Control System of Hot Strip Mill
热轧精轧机换辊自动化控制系统研究
Improvement the Cut Water Equipment of the Work Roll of the 1750mm Hot Rolling Finishing Rolling Mill in Bayi Steel
八钢1750m m热轧精轧机工作辊切水装置的改进
Application Practice of the Hot Rolling Lubrication in Tangshan Jianlong 800mm Finishing Mill
800mm精轧机组热轧润滑工艺应用实践
Research on Thermal Deformation Behavior of Work Roll in Finishing Trains of Hot Strip Mill
热轧带钢精轧机工作辊热变形行为的研究
Vibration of Finishing Stands in Hot Strip Mill and Suppression Measure
热轧宽带钢精轧机组机架振动分析及抑制措施
The Mathematical Model and Simulation Research of Hot Strip Steel Finshing Group;
带钢精轧机组热轧过程数学模型及仿真研究
The Expert System's research on the Design of Hot-strip Tandem Finisher Group;
热带钢连轧精轧机组设计专家系统研究
The Finish Mill Model Applied in the Computer Control System for the Shot Strip Mill of ShanDong TaiShan Iron&Steel Co.,Ltd.;
泰钢热连轧计算机控制系统精轧模型应用研究
Modeling the temperature-dropping pattern of the ultra-low-carbon finishing stands in the 2~(nd) hot-rolling plant at Wisco
武钢二热轧超低碳钢精轧机组温降模型的建立
Introduction the on-line Process Method of Electric Joint Slack for Heat Rolling and Finish Rolling
浅谈热轧精轧电机联轴器在线加工方法
PLC-Based Simulation Platform for Single Stand of Hot Strip Finish Rolling
基于PLC的热轧带钢精轧单机架仿真平台
Development and Application of Technology Lubrication for Hot Rolling Technique in Finishing Stand of Jigang Continuous Hot Strip Mill
济钢热连轧精轧机组工艺润滑轧制技术开发与应用
Software of forecasting finish rolling temperature for HSM was developed based on the traditional strip temperature dropping model.
在传统热连轧精轧机组温降模型基础上，开发了带钢热连轧终轧温度预报软件。
Coilbox can make coil in tandem opration with rougher and also while uncoil the strip is being in finish mill.
生产过程中热卷箱需要与粗轧机形成连轧连卷,又要与精轧机形成连开连轧的工况。
High-Precision Rolling Force Prediction Model for Hot Strip Continuous Rolling Process
热轧带钢精轧过程高精度轧制力预测模型
Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.
具有优良的韧性和抗热烈纹能力,适用于预精轧机架和热轧螺纹钢.
Analysis on Causes of Work Roll Breaking on Finishing Mill;
武钢热轧厂精轧工作辊断裂原因分析
