These high temperature materials include heat-resisting steels, iron-base nickel-iron-base, nickel-base, titanium-base alloys, intermetallics and also super-high temperature tungsten-base refractory alloys.
综述了耐热钢、铁基、铁 镍基、镍基、钛基合金、金属间化合物以及钨基超高温材料的发展、应用及其在高温合金领域中的重要研究进展。
After four doses of nitrogen ions——3×1017, 6×1017, 9××1017 and 2× 1018N+/cm2 arerespectively injected into Ti -6Al -4V of titanium alloy, microhardness is determined and so is its wearability by scratching tests.
在钛基合金Ti-6AI-4V上分别注入3×10~(17)、6×10~(17)、9×10~(17)和2×10~(18)N~+/cm~2四种剂量的氮离了后,进行显微硬度的测定及通过划痕试验测定其耐磨性,结果表明:经离子注入后的钛合金,其显微硬度及耐磨性均有不同程度的提高,但其提高的程度与注入剂量的大小有关,其中,以6×10~(17)和9×10~(17)N~+/cm~2为佳,表明在离子注入技术用于材料改性时,注入剂量与材料表面性能的提高有着密不可分的关系。
Study on Corrosion Behaviors of Fe-based and Ti-based Alloy in Molten LiCl-Li_2O;
铁基及钛基合金在熔融LiCl-Li_2O中的腐蚀行为研究
Present research status of brazing technology of TiAl-based alloys;
钛铝基合金钎焊技术的研究现状
It is of significance to prepare TiAl-based alloys by cold crucible electromagnetic confinement and directional solidification technique because of its unique features without contamination and continuity during process.
冷坩埚电磁约束成形与定向凝固技术对于探索高质量钛铝基合金的制备成形具有重要意义。
Effect of the compression on the oxidation resistance of the siliconized TiAl-based alloy;
压缩变形对渗硅钛铝基合金抗氧化性能的影响
Siliconizing treatment on TiAl-based alloy was conducted by Al-Si molten alloy.
使用Al—Si合金熔体对钛铝基合金进行表面渗硅处理,在表层发生了不同程度的界面反应,生成成分比例不同的以Si,Ti,Al三元素为主的物相。
Based on a overall review of the research and development of the Ti-V-based hydrogen storage electrode alloys, and the degradation mechanism of the hydrogen storage alloy electrodes, the Ti-V-based alloys were selected as the study objects of this thesis.
在此基础上，确定以钛钒基贮氢电极合金为研究对象，采用XRD／Rietveld、SEM、TEM和AES等材料分析方法以及恒电流充放电、电化学阻抗谱、线性极化、阳极极化和恒电位阶跃等电化学测试技术，对钛钒基合金的成分、相结构与电化学性能三者之间的关系进行了系统的研究，提出贮氢电极合金的“本征／非本征衰退机理”，并以钛钒基合金为实例对该机理进行了验证。
Study on Corrosion Behaviors of Fe-based and Ti-based Alloy in Molten LiCl-Li_2O;
铁基及钛基合金在熔融LiCl-Li_2O中的腐蚀行为研究
Oxidation Behavior and Mechanical Properties of Ti Alloys and Ti-based Composites;
钛合金和钛基复合材料的氧化行为及力学性能
Fundamental and Applied Research on the Fatigue Resistance of Titanium and Titanium Alloy Cast Denture Clasp
钛及钛合金铸造卡环疲劳强度的应用基础研究
Preparation and Characterization of Porous Titanium and Titanium Alloy by Cold Spraying
基于冷喷涂的多孔钛与钛合金的制备与表征
Titanium and titanium alloy bars
GB/T2965-1996钛及钛合金棒材
Titanium and titanium alloy wire
GB/T3623-1998钛及钛合金丝
Terminology for titanium and titanium alloy
GB/T6611-1986钛及钛合金术语
The specimens made from Bayer tooth, thermosetting plastic, copper base alloy, titanium and its alloy have relatively good wear resistance as well and are thus idea prosthetic materials.
拜尔牙、热固塑料、铜基合金、钛及钛合金是较为理想的牙科修复材料 ;
nitrided niobium-titanium-tungsten alloy
氧化铌--钛--钨合金
The Study on the Properties of Titanium Substrate Metal Oxide Composite
钛基金属氧化物复合材料性能的研究
Fatigue analysis for the SENT specimen of TA6V titanium alloy based on ANSYS
基于ANSYS的TA6V钛合金SENT试样疲劳分析
Processing map of TA15 titanium alloy based on BP neural network
基于BP神经网络的TA15钛合金加工图
Study on the Microstructure of Nickel-based Superalloy and Titanium Alloy Surface Coating;
镍基高温合金和钛合金表面涂层微观组织分析
Investigation on the Phase Transitions and Mechanical Properties of Titanium and Titanium-aluminum Compound Based Alloys with the Valence Electron Theory;
钛与钛铝化合物基合金相变及力学性能的价电子理论研究
Oxidation Resistance Of Different Matrix Composites;
不同基体合金钛基复合材料的高温氧化性能
Interface Reaction between TiNi Alloy and BN Based Shell Mold for Investment Casting Ti Alloy
BN基复合型壳熔模精铸钛镍合金时的界面反应
Collection of metallographs on titanium and titanium alloy terms
GB/T8755-1988钛及钛合金术语金相图谱
Study on Ethylene and Methyl Methacrylate Polymerization by Dinuclear Metallocenes of Ti, Zr and Nonmetallocene Ti Complexes;
钛锆双核茂金属和非茂钛金属化合物的合成及其催化乙烯及甲基丙烯酸甲酯聚合
