Sample ofβ-sialon powders with certain mass fraction were synthesized by the carbothermal method through nitridation at 1450℃in a tubular furnace utilizing refined kaolin and kaolin rough ore from Guangxi Weiluo as raw materials.
以南宁维罗高岭土为原料,分别利用精细化高岭土和原矿作原料,采用碳热法,在1450℃经氮化合成一定质量分数β-sialon粉体。
The paper studied the process possibilities and the process parameters,which produces rare earth silicoferrite by carbothermic method.
本文探索了在 75 k VA矿热炉上用碳热法生产稀土硅铁合金的工艺参数、RE∶ Si值与稀土收率及合金中稀土含量的关系、不同配碳量条件下稀土收率及合金中的稀土含量 ,并获得了满意的效果。
It introduces the practice of smelting ferrozirconium-silicon with carbothermic method,and the ways of preventing and dealing with the furnace accretion.
介绍了碳热法冶炼硅锆合金的生产实践,并重点阐述了预防和处理炉瘤的办法,以及碳热法生产硅锆合金的前景。
Physical properties of raw materials used in producing rare earth silicide alloy by carbon thermal reduction method(Ⅰ) ——Thermophysical properties and specific resistance;
碳热法生产稀土硅化物合金的物料性质(Ⅰ)——热物性参数与电阻率
Physical properties of raw materials used in producing rare earth silicide alloy by carbon thermal reduction method(Ⅱ) ——Pore ratio and compressive strength;
碳热法生产稀土硅化物合金的物料性质(Ⅱ)——气孔率与抗压强度
Effects of calcining methods and addictives on AlN powder prepared by carbothermal reduction;
煅烧方式和添加剂对碳热还原法制备氮化铝粉末的影响
Preparation of LiFePO_4/C composite cathode materials by a carbothermal reduction method;
用碳热还原法制备LiFePO_4/C复合正极材料
Aluminium nitride powder was prepared by carbothermal reduction process.
本文以Al2O3和活性碳为原料,采用碳热还原法制备了氮化铝陶瓷粉末。
THERMAL DYNAMICS ANALYSIS AND PRACTICE ON SMELTING Si-Ba-Fe ALLOY BY CARBON-THERMAL METHOD
碳热法生产硅钡铁合金的热力学分析及实践
Thermo-Protection Calculation Method for C-C Nose Cap of Space Shuttle
航天飞机碳-碳端头罩的热防护计算方法
ANALYSIS ON CARBON BEHAVIOR IN COURSE OFMANUFACTURING LOW-CARBON FERROCHRO-MIUM BY "PERRIN PROCESS" (Ⅰ)
热兑法生产微碳铬铁过程碳行为分析(Ⅰ)
PREPARATION OF CARBON-ENRICHEDβ-SiC NANO-POWDERS BY THE SOL-GEL AND CARBOTHERMAL METHODS
溶胶-凝胶-碳热还原法制备富碳β-SiC纳米粉体
testing method for thermal shock of carbonated beverage bottles
碳酸饮料玻璃瓶耐热冲击试验方法
Synthesize Silicon Carbide Test Research by Multi-thermal Source and Melt;
多热源“熔透”法合成碳化硅的实验研究
Recovery of Uranium from Bao Steel's Tailings by Carbochlorination Reaction.
低温碳热氯化法回收包钢尾矿中的铀
Synthesis of Aluminum Oxynitride Powder by Carbothermal Reduction Method
碳热还原法合成ALON粉体的研究
The study on preparation of V_8C_7 powder by carbon thermal reduction
碳热还原法制备V_8C_7粉末的研究
Preparation of Si_3N_4 nanometer powders by sol-gel method and carbothermal reduction method
溶胶凝胶-碳热还原法制备Si_3N_4纳米粉末
Carbon nanotubes synthesized by mechanothermal method
机磨热加工法合成碳纳米管(英文)
Thermodynamics analysis of carbothermal reduction of TiB_2
碳热还原法合成TiB_2的热力学分析与研究
Application of Phase Equilibrium Thermodynamic Method in Alloy Design for High Carbon Alloy Steel with Ultra Fine Carbides;
相平衡热力学方法在超细碳化物高碳合金钢合金设计中的应用
Synthesis of with high specific surface area β-SiC using starch as carbon source
以淀粉为碳源碳热还原法合成多孔高比表面积β-SiC
Analyses of Microstructures of Carbon Fibers and Pyrocarbon in Unidirectional Composites by XRD Method
单向C/C复合材料中碳纤维和热解碳微结构的XRD法分析
Studies on the carbothermal preparation of titanium carbonitride powders in the open system
开放体系下碳热还原法制备碳氮化钛粉末的研究
pyrolytic carbon silicon carbide mixture
热解碳 碳化硅混合物
Production and growth mechanisms of BCN nanotubes
硼碳氮纳米管的热解法制备及生长机理研究
