Reasons for the Difficulties in Clay Gunning in No.1BF Taphole and Its Measures;
1号高炉铁口打泥困难的原因分析与对策
In order to assure the BF's safety production, protect the taphole and the part around it, lighten erosion of taphole brickliner, the taphole clay containing Titanium is used to maintain taphole.
为保证高炉安全生产 ,保护铁口及炉缸的铁口周围部分 ,减轻铁口砖衬的侵蚀 ,探讨利用含钛炮泥维护铁口。
In order to increase the hot metal throughput of main trough, some reforms to the trough were carried out, and in order to realize zero-interval tapping and meet the needs for smooth operation and intensified smelting of BF, the management and maintenance of taphole were strengthened at Maanshan Steel's 2500 m~3 BF.
马钢2500m~3高炉通过对渣铁沟进行技术改造,增加了主沟通铁量;通过加强铁口管理与维护,实现了零间隔出铁,满足了高炉强化冶炼的需要。
Based on the production experience and the analysis on the aspects of iron notch depth,notch opening situation and slag tapping from the iron notch,the reasonable composition of gun mud is found out to improve its quality,and as a result,the iron tapping from the notch gets obvious improved.
根据唐钢2 000m3高炉的生产实践经验,从铁口深度、开口情况、铁口出渣、铁情况进行了分析,找出了改进炮泥质量的合理配比,炉前铁口出铁状况明显好转。
Through adopting the technical measures such as local tuyere blowing above iron notch, burning iron notch with rich oxygen lance, tapping from iron notch, discharging slag and hot metal timely, adding coke in concentrative and de-concentrative forms and drilling the tuyere timely and so on, the accident of hearth chill was treated effectively.
通过采取铁口上方局部风口送风、富氧枪烧铁口、铁口出铁、及时排放渣铁、集中与分散加焦和适时打风口等措施 ,有效地处理了炉缸冻结事
In addition,the main reason for iron notch disorder of No.
结合大修前炉体破损情况,对这2座高炉第一代炉役生产中出现的问题进行调查研究,认为7号高炉在应用大型模块和炉腰冷却壁设计上存在不足,高炉边缘气流发展,操作炉型不合理,炉况不顺;7号高炉炉底温度偏高是炉底炭砖渗铁造成的,6号高炉炉底温度偏高是炉底串煤气所致;7号高炉铁口失常的主要原因是铁口组合砖损坏严重和该部位炉壳开裂,并提出了改进建议。
tapping hole is an integrated one in many aspects.
高炉炉前铁口管理是多方面的综合管理,对2#1880m3高炉铁口出现的问题采取针对性的措施,抓住操作上的可控因素,铁口工作状况取得明显进步。
Study of design scheme of TZG-120 iron roughneck;
TZG—120型铁钻工的设计方案研究
In this paper,the PLC hydraulic pneumatic control system of the punching process of iron roughneck was proposed for the walking power tong.
为满足国内对钻井设备自动化程度越来越高的要求,进一步提高液压大钳的自动化程度,基于行走式动力大钳提出了铁钻工上扣过程的PLC液压气动控制系统。
During the process of the automatic drilling,iron roughneck is the most developed equipment of pipe handling operation and one of the most important automatic equipment which can complete connection of the pipe,casing and other equipmenu and improve the safety and efficiency in oil production.
在自动化钻井生产中,铁钻工是目前最先进的扭矩旋扣设备,可完成钻杆、套管等钻具的旋扣连接工作,提高生产效率和安全性,是现代化钻井中重要的自动化设备之一。
White - hot liquid iron is running off through the tapping hole .
白灼的铁水从出铁口流出。
Molten Iron Flow Rate Measurement of Blast Furnace Taphole Based on Image Processing
基于图像的高炉出铁口铁水流量检测
The Practice of Transforming the Main Trough of Blast Furnaces with Single Taphole into Iron Store Structure with New Anti-explosive Castable Refractory
新型防爆铁沟浇注料与单铁口高炉出铁主沟储铁式结构改造实践
The tapholes lead to one or more runners with slag skimmers.
出铁口通向一条或多条装有撇渣器的铁水沟。
Be careful when you get to the railway crossing.
到铁路道口时要小心。
gate ,level-crossing of iron or steel
平交道口道栅,铁或钢制
an appliance for opening tin cans
开马口铁罐头的器具。
There were bars across the windows of the prison.
监狱窗口装有铁栅。
tightening bolt
拉紧螺栓，(铁)风口拉杆
circlip, of iron or stee
开口簧环,铁或钢制
Gray iron castings for pipe fittings
GB/T3420-1982灰口铸铁管件
guarded railway crossing
有防护装置的铁路道口
GDIFS (Gray and Ductile Iron Founders Society)
灰口铁与高强度铸铁铸造者学会
port rail line [Railway Development Strategy]
港口铁路线〔铁路发展策略〕
A container or box made of tin plate.
马口铁器皿由马口铁制成的容器或盒子
Indian railways, tinplate and galvanized iron products (production processing wholesale and retail) (limited branch).
印铁，马口铁制品及马口铁（生产加工批发零售）（限分支机构）。
The stop of" Zhujiangxincheng Metro Station" is right at the exit of the Metro.
、珠江新城地铁站候车点为地铁站出口处。
The Technology and Microstructure for Grey Iron High Chromium White Iron Bimetal in Expendable Pattern Casting
高铬白口铁-灰铁双金属材料的消失模铸造
