Effect of rolling process on the mechanical properties of bake-hardening sheet for automobiles;
轧制工艺对烘烤硬化汽车板力学性能的影响
Optimization of rolling process to reduce the time of the hot rolled strip piled up
优化轧制工艺减少热轧卷堆钢次数
By adjusting the rolling process,adopting the reheating process,redesigning and optimizing the pass sequence of the Φ650 mm×1/Φ550 mm×1/Φ550 mm×4 semi-continuous rolling,theΦ70～Φ75 mm GCr15 bearing steel bar out of 260 mm×300 mm continuous casting slab is successfully developed.
通过调整轧制工艺,采取相应的加热工艺及对Φ650mm×1/Φ550mm×1/Φ550mm×4半连轧生产线的孔型系统的重新设计、优化,莱钢成功开发了采用260mm×300mm大断面连铸坯生产Φ70～Φ75mm规格GCr15轴承钢棒材。
Super large diameter aluminium alloy ring rolling technology;
超大直径铝合金环形件轧制工艺研究
Effect of Rolling Technology on Toughness of 09CuPTiRE Steel Plate;
轧制工艺对09CuPTiRE钢板韧性的影响
Research on 45V steel rolling technology;
45V钢轧制工艺的研究
Experiment Study on the Techniques of the Cold Rolling Steel Matrix Composites;
冷轧钢基复合材料轧制工艺实验研究
Optimization of the Hot Rolling Process for Narrow Strip Steel
热轧窄带钢生产线轧制工艺改造综述
The Downstream Rolling Process of Twin Roll Casting Magnesium Alloy Sheet AZ31B;
双辊铸轧AZ31B镁合金板坯的二次轧制工艺
Application of Roll Gap Lubrication in 1880HSM of Baosteel
轧制工艺润滑技术在宝钢1880mm热轧的应用
Effects of Rolling Process on Microstructure and Properties of Twin Rolling-casting AZ61 Magnesium Alloy Strip
轧制工艺对双辊铸轧AZ61镁合金组织性能的影响
Effects of Rolling Process on Microstructures and Properties of the Commercial Pure Titanium
轧制工艺对工业纯钛组织性能的影响
Study on Rolling Process of AZ31 Mg Alloy Plate Fabricated by Horizontal Continuous Casting;
AZ31镁合金水平连铸板材轧制工艺研究
Research on Rolling Technology of Conical Ring with Inner Steps and Ring Rolling Mill;
内台阶锥形环件轧制工艺与设备研究
Research on Rolling Technology and CAD for Ring with Stepped Cross Section;
台阶截面环件轧制工艺及CAD研究
The Design of Full Continuous Rolling Process and Automation System;
全连续轧制工艺及其自动化系统研究
Study on Processing Parameters Optimization of Three-rolls Planetary Rolling;
三辊行星轧制工艺参数优化技术研究
Research on Rolling Technology, Microstructure and Properties of La-Mo Alloy Plate
La-Mo合金板轧制工艺及组织性能研究
Experimental research and numerical simulation on warm rolling process of AZ31 magnesium alloy
AZ31镁合金热轧制工艺及数值模拟研究
Technical Research of 42CrMo Alloy Bar's Rolling With Cooling
42CrMo合金棒材降温轧制工艺研究
ELC Steel Production by Ferritic Hot Rolling Process
应用铁素体区轧制工艺生产ELC钢
The Improvement on Roller Forced Cooling Systerm of Meishan 1422 Hot Strip Mill
梅钢1422热轧轧辊强制冷却工艺优化
THE APPLICATION OF CONTROLLED-COOLING TECHNOLOGY FOR REINFORCED BAR TO CONTINUOUS ROLLING PROCESS
钢筋轧后控制冷却工艺在连轧机组的应用
Researching the Technics of Pickling-CC Rolling & the Optimization Design of Rolling Regulation;
酸洗—冷连轧生产工艺的研究及轧制规程的优化
