Technical process and test of narrow gap submerged arc welding was introduced in detail.
详细介绍了低合金高强钢BHW - 35壳体的窄间隙埋弧焊工艺及试验 ,根据试验结果制订施焊工艺 ,并成功用于大直径气化炉壳体的焊接。
The control system by microcomputer for tandem wire narrow gap SAW machine is solved adopting 80C196 monolithic computer.
采用80C196单片机为控制核心,解决了窄间隙埋弧焊机的微机控制问题。
This paper summarizes the variety and output of submerged arc welding fluxes, and its application status quo to many fields in china is analyzed.
概述了我国埋弧焊焊剂的品种、产量发展及在国内各行业应用的情况,介绍了国外埋弧焊焊剂的生产应用情况,并对我国焊剂的发展提出了一些建议。
Based on the experiment of twin-wire narrow gap welding in single pool mode by employing alternative pulsed arcs, the influences of welding parameters on the appearance of weld and welding process stability were investigated.
采用交替脉冲,对双丝共熔池窄间隙焊进行工艺试验,研究了焊接参数对焊缝成形和电弧稳定性的影响。
Lateral oscillation arc welding, high-speed-rotating arc welding, twin-wire welding, and ultra NGW(narrow gap welding) can all assure the fusion of side wall and improve the oppearance of weld in relatively small welding variables.
横向摆动电弧、高速旋转电弧、双丝焊和超窄间隙焊4类方式都可以在较小的焊接规范下,保证侧壁熔合,改善焊缝成形,防止焊接裂纹。
The hollow-axis motor drives the offset nozzle and rotates the arc on the tip of wire at high speed,so as to ensure enough penetration into the sidewalls in narrow gap welding.
在该系统中,焊丝穿过电机的空心轴后从导电嘴的偏心孔送出,电机带动导电杆和偏心导电嘴旋转,从而使焊丝端部的电弧以一定直径高速旋转,以保证窄间隙焊接接头具有足够的侧壁熔深。
There are many errors such as the adjusting error and the error due to the actual place behind the place measured by sensor and the error due to arc interaction and the error of optical parameter and the initial error and the error due to demarcating parameter in the narrow-gap welding Automatic following system with CCD figure treatment.
带CCD图像处理的窄间隙焊缝跟踪系统中 ,存在执行调节误差、传感导前误差、弧光干扰误差、光学参数误差、初始给定误差、标定参数误差等。
Study on Embrittlement Mechanism of Narrow Interval Submerged Arc Welding Heat Treatment for Pressure Vessel
压力容器窄间隙埋弧焊热处理脆化机理研究
The Experiment and Application Study for 2.25Cr-1Mo-0.25V Steel by Narrow Submerged Arc Welding
采用窄间隙埋弧焊焊接2.25Cr-1Mo-0.25V钢的试验及应用研究
narrow gap one-side automatic welding
窄间隙单面自动电弧焊
Realization of Ultra-narrow Gap Welding with Flux Strips Constraining Arc;
焊剂带约束电弧超窄间隙焊接的实现
Arc Characteristic and the Development of Flux Bands in Ultra-narrow Gap Welding
超窄间隙焊接焊剂带研制及电弧特性
Constricted Arc by Flux Strips Applied to Ultra-narrow Gap Welding
焊剂带约束电弧用于超窄间隙的焊接
The Hot Characteristic of Narrow Gap Welding with the Arc Constricted by Flux Strips;
窄间隙焊接中焊剂带约束电弧的加热特性
The Research on the Technology of Ultra-narrow Gap Welding with the Flux Strips Constricting Arc;
焊剂带约束电弧超窄间隙焊接方法研究
Experimental method and equipment of ultra-narrow welding with flux strips constraining arc
焊剂带约束电弧超窄间隙焊接试验方法及装置
The Study of Ultra-narrow Gap Welding Technology with Constricted TIG Arc by Two Pieces of Rotary Ceramics;
旋转陶瓷片约束TIG电弧超窄间隙焊接技术研究
The Characteristic of TIG Arc and the Application of Ultra-narrow Gap Welding Technology with Constricted TIG Arc by Two Pieces of Solid;
固壁约束TIG电弧的特性及超窄间隙焊接的应用
Research on Technology of Rotating Arc Horizontal Narrow Gap Welding of 12Ni3CrMoV Steel
12Ni3CrMoV钢旋转电弧窄间隙MAG横向焊接工艺研究
Research on arc sensing method of verage current for narrow gap rotating method
窄间隙焊缝跟踪旋转电弧电流平均值传感法比较研究
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
Stability of Double Wires Narrow-gap Gas Metal Arc Welding
双丝窄间隙熔化极气体保护焊的焊接稳定性
automatic submerged slag welding of rail
钢轨自动埋弧电弧焊
The Research on the Process Stability and Molten Pool Forming in Ultra-narrow-gap Welding
超窄间隙焊接过程工艺稳定性及熔池形成
transverse submerged arc welding
横列双丝并联埋弧焊
