In order to solve this problem,a new method for designing BIT fault diagnosis strategy for fault-tolerant systems,considering reliability and testing costs,was proposed based on dynamic fault tree model.
为此,以动态故障树模型为基础,综合考虑可靠性和测试费用等因素,提出了一种面向复杂容错系统的BIT诊断策略设计新方法。
A fault-tolerant system experiences a crash due to hardware components faults or progressive performance degradation as an"aging"phenomenon,because of running continuously for very long periods.
容错系统不仅会产生硬件故障,由于连续长时间的运行,系统的性能也会逐渐下降或失效,即老化现象。
By the example of applying it on the(N+M) fault-tolerant system,analyzes its performance,results show the search efficiency and accuracy of improved particle swarm optimization algorithm are better than general.
通过将其应用于(N+M)容错系统模型的实例,对改进算法的性能进行了分析,结果表明,改进算法的搜索效率和精度均优于一般的粒子群算法,同时具有较好的收敛稳定性。
In this paper (N+M) fault tolerant systems are studied theoretically.
对（Ｎ＋Ｍ）容错系统进行了初步的理论研究，分析了其可靠性，考察控制器可靠性和维修性对系统可用度的影响，并提出了改善系统可用度的措施。
The basic principle about dynamically re configurable FPGA was introduced and an new design method about the fault tolerant system of digital circuits was presented.
在介绍FPGA动态可重构技术原理的基础上 ,探讨了该技术在数字电路容错系统中的应用方法和构成原理 ,并针对某心脏起搏器电路系统 ,采用FPGA动态可重构方法进行了系统的容错设计与实验 。
N+M) fault tolerant system (FTS) makes full use of the hardware and software of its own, and intelligent networking is a practical way to implement it, so that it is expected to have wide application in control systems.
分析了（Ｎ＋Ｍ）容错系统的经济性，提出了其经济性的优化模型，并利用图视化方法进行了求解，给出了一种简单实用的最佳备件量选取方法。
But it can not be use d to analyze the reliability of fault tolerant systems.
传统的故障树分析 ( Fault Tree Analysis,简称 FTA)方法是一种基于静态逻辑或静态故障机理的方法 ,但这种方法对容错系统的可靠性分析已不适用。
Redundancy indicates that the system is fault -tolerant to a certain degree.
冗余是指系统有一定的容错能力。
The tolerance of the component value used around A2 will affect the filter's pole locations and will affect the amplitude of the filtered sine wave.
A2放大器的元件的容错能力会影响滤波器的极点位置，进而影响已过滤正弦波的振幅。
Adaptive Energy Fault-tolerant Management for Hybrid Electric Transit Bus
混合动力客车自适应能量容错管理的研究
Beyond that, an ideal network backbone would provide comprehensive manageability and robust fault tolerance.
此外，理想的主干网能提供综合的管理能力和有力的容错功能。
The kernel also supports security and fault tolerance, which is the ability to recover automatically when parts of the system fail.
内核也支持安全和容错功能，容错是指当部分系统出故障时自动恢复的能力。
We can't tolerate his mistakes.
我们不能容忍他的错误。
As a storage application, distributed system must have fault tolerance-recovery capability.
作为存储应用,分布式系统需要具备综合容错-恢复能力.
May I be strenuous, energetic and persevering !May I be patient! May I be able to bear and forbear the wrongs of others! May I ever keep a promise given!
愿我努力精进，勤奋不懈；愿我有耐心能容忍并宽恕别人的过错，愿我能信守自己立下的诺言。
The Influence of Intricate Edge of Welded Seams in Thin-walled Pressure Vessels on Strength
薄壁压力容器焊缝错边对强度的影响
fault tolerance
容错,[港]故障容忍
Cannot edit %1: Error reading the value's contents.
不能编辑%1：读取键值内容时出错。
Tending or likely to be erroneous
容易弄错或可能不准确的.
Achieving Fault-Tolerance and High-Performance in Grid Applications;
若干典型网格应用的容错及性能研究
Design & Research in Automatic Fault Tolerance Integrated Navigation System;
智能容错组合导航系统的设计与研究
Research on Independent Intelligent Fault Tolerant Control for Fighter;
歼击机自主式智能容错飞行控制技术
Research on Software Fault-Tolerance of COTS Microprocessor;
COTS微处理器软件容错性能的研究
Fault-Tolerant Guaranteed Cost Control of Fuzzy Systems Based on T-S Model
基于T-S模糊系统的容错保性能控制
Students with an increased fruit and vegetable intake and less caloric intake from fat were significantly less likely to fail the literacy assessment.
那些有较多水果蔬菜摄入和较少脂肪热量摄入的学生在读写能力测试中明显不容易出错。
