The result shows that the relative wear resistance reaches the maximum,when the scanning interval is 12mm.
对不同扫描间距试样进行耐磨性试验表明 ,当扫描间距为 12mm时相对耐磨性达到极大值。
The effect of temperature descending rate, treatment temperature and calefactive rate on the relative wear resistance of GCr15 was investigated.
自行设计制造了能实现工艺参数自动控制的深冷处理系统,研究了深冷处理工艺过程中降温速率、深冷处理温度以及升温速率等工艺参数对GCr15钢相对耐磨性的影响规律。
Their relative wear resistance were tested on a SKODA-SAVIN tester.
将45钢试块在不同的渗硫温度和保温时间下进行了离子渗硫处理，并在SKODA-SAVIN快速磨损试验机上测定了各试块的相对耐磨性。
Study on Waterproof and Wearproof of Diaze Sensitized Emulsion;
重氮感光胶耐水耐磨性的研究
Investigations of wear resistance after Supersonic Particles Bombarding in Cr-Zr-Cu surface;
超音速颗粒轰击铬锆铜表面耐磨性能的研究
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
Microstructure and wear resistance of laser clad TiC+Ti and TiC+NiCrBSi composite layers on Ti-6Al-4V alloy;
TC4钛合金激光熔覆TiC+M涂层组织和耐磨性能研究
testing method for abrasion of vulcanized rubber (nbs method)
硫化橡胶耐磨性能的测定(nbs磨损机)
Study on Abrasion Resistance of Laminate Flooring
强化木地板耐磨性能及国产化耐磨纸的研究
Microstructure and Wear Resistance of NR400 High Strength Bainite Wear-resistant Steel Plate
NR400高强度贝氏体耐磨钢板的组织与耐磨性能
testing method for abrasion of vulcanized rubber (akron method)
硫化橡胶耐磨性能的测定(用阿克隆磨耗机)
testing method for abrasion of vulcanized rubber (william's method)
硫化橡胶耐磨性能的测定（william法）
The Contact Fatigue and Wear Resistance of ADI
奥贝球墨铸铁的接触疲劳与耐磨性能
Influence of Co on the Microstructure and Wear Behavior of High-aluminum Bronze;
Co对高铝青铜组织及耐磨性能的影响
crock resistance
[染色]耐磨擦性能
Studies on the Grinding Behavior and Wear Resistance of Y-TZP/Al_2O_3 Ceramics;
Y-TZP/Al_2O_3陶瓷磨削性能和耐磨性的研究
Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC Composite
Si_3N_4-SiC复相耐磨材料的冲蚀磨损性能
Impact Abrasive Wear Resistance of New Type Martensitic Wear Resistant Steel
新型马氏体耐磨钢的冲击磨料磨损性能
The ability of a garment to withstand prolonged wear.
耐磨性衣物经受长时间穿着的性能
Influence of Copper on Abrasion Resistance of Wear-Resisting Casting Steel for Mines
铜对矿山用耐磨铸钢抗腐蚀磨损性能的影响
Study on Abrasive Resistance of Haystellite7 Alloy Coating Prepared by Flame Remelting
火焰喷熔Haystellite7合金涂层耐磨粒磨损性能研究
Preparation and Solid-Liquid Erosive Wear Property of Sialon-Sic Ceramic Composite
Sialon-SiC耐磨陶瓷的制备及液固冲蚀磨损性能研究
The specially designed composed formulation provides a good anti-cutting performance.
特殊的复合胎面胶配方设计,耐磨耐切割性能好.
Microstructure and Properties of Heat- and Wear-resistant Al-Si Alloy Prepared by Spray Deposition;
喷射沉积Al-Si系耐热耐磨合金的组织及性能
Study on the Microstructure and Properties of a Special Low-Alloy Steel with Wear-Heat Resistance;
特种低合金耐磨耐热钢组织和性能的研究
