Development of Valve Core Groove and Fillet Grinding Machine;
阀芯槽及倒角磨床的研制
The Influence of Root Fillet and Boundary Layer Transition on the Aerodynamic Performance of Centrifugal Impeller;
叶根倒角及边界层转捩对离心叶轮气动性能的影响
The modeling process of fillet and architrave is complex and time-consuming.
针对工程中复杂而完美的倒角、线角建模常常需要巨大的时间代价,本文提出了一种基于特征与参数化相结合的高效建模技术。
Development of Abrasive Belt Grinding Machine for Chamfering Engine Wrist-pin Holes;
发动机连杆小端孔口倒角砂带磨床的研制
Applications of Tap-chamfering Compound Cutting Tool to the Tapped HoleProcessing of Electrical Apparatuses;
丝锥—倒角刀复合刀具在电器螺纹孔加工中的应用
Study on Modeling of Gear Chamfering Process and Simulation System Development;
齿轮倒角加工建模分析及仿真系统开发
The Design and Research of the Detector of New Roll - bearing Inner - hole Chamfer;
新型滚动轴承内孔倒角检测器的设计与研制
Development of AutoCAD on Labeling Chamfer According to Chinese National Standard Used ARX;
AutoCAD倒角国标标注的ARX二次开发
Techniques experimentation and generalize to application of the chamfered rivet;
倒角铆钉的工艺试验及推广应用
Fillet/Chamfer Modifie
r倒圆角/倒角修改器
Rounding and chamfered of parts
GB/T6403.4-1986零件倒圆与倒角
largest permissible single chamfer dimension
允许最大单一倒角尺寸
Plain washers--Chamfered--Normal series--Product grade A
GB/T97.2-1985平垫圈倒角型-A级
Chamfers for optical parts
GB/T1204-1975光学零件的倒角
gear tooth chamfering and rounding machine
齿轮倒角和修圆机床
dowel cutting-to-length and chamfering machine
圆棒榫截断及倒角机
Hexagon thin nuts--Product grades A and B--Chamfered
GB/T6172-1986六角薄螺母A和B级倒角
Hexagon thin nuts--Product grade B--Unhampered
Gb/T6174-1986六角薄螺母bb>级b>无倒角
It can be used for last chamfering in the continuous machine and.replace the abrasive wheel.
直接用于连续磨边线上后级倒角精磨，替代普通碳化硅倒角轮。
Single type angle drills: Use to machine chamfer for hole of glass, stones etc. Various type and specification.
独立倒角钻头：用于玻璃孔、材孔倒角使用。各种型号及规格。
Single type angle drills : Use to machine chamfer for hole of glass , stones etc . Various type and specification.
独立倒角钻头：用于玻璃孔、石材孔倒角使用。各种型号及规格。
Rolling bearing chamfer dimension limits
GB/T274-1991滚动轴承装配倒角极限
Square set screws with chamfered end
GB/T821-1988方头倒角端紧定螺钉
Design of Gear Shaping Cutter Chamfering Edge for Intemal Rectangular Splines
内矩形花键插齿刀倒角刃的参数设计
INFLUENCE OF ROOT FILLET ON THE AERODYNAMIC PERFORMANCE OF CENTRIFUGAL IMPELLER
叶根倒角对离心叶轮气动性能的影响
The reciprocal of the tangent of an angle in a right triangle.
余切直角三角形中角的正切的倒数
The reciprocal of the sine of an angle in a right triangle.
余割直角三角形中一个角正弦的倒数
