您的位置:汉字大全 > 行业英语 > 机械 > unloading valve是什么意思

unloading valve是什么意思

中文翻译卸荷阀

网络释义

1)unloading valve,卸荷阀2)load-off valve,off-loading valve, unloader valve,unloading valve,卸荷阀<液>3)Unloading valve group,卸荷阀组4)unloading valve,释荷阀,卸荷阀5)unloading overflow valve,卸荷溢流阀6)Unloading valve of slide,滑块卸荷阀

用法例句

    Bring forward the new hydraulic element-intrinsically-safe solenoid pilot valve on the basic of general unloading valve.

    通过对传统泵站卸荷阀工作原理进行分析,采用了本安型电磁卸荷阀,解决了传统泵站系统的压力波动大,压力调节不方便等问题,并且通过压力检测反馈来控制电磁先导阀启闭,以此控制泵的卸荷时机,使泵的压力波动在设定范围内。

    The security system of ND83/83/07-1 steam turbine being used as examples, the fault mechanism that quick-acting shutoff time is prolonged, and unloading valve operation principle were analyzed and investigated.

    在汽轮机打闸或跳闸时,主汽门关闭时间延长的故障在许多电厂,尤其新机组调试过程中均出现过;以ND83/83/07-1型汽轮机的保安系统为例,对卸荷阀的工作原理,以及快关时间延长的故障机理展开全面分析和研究,并借助具体事例分析对此做了进一步阐述。

    This paper analyzes the structural features and operation principle of special unloading overflow valve on monorail crane, and researches the features of automatic loading, pressurized unloading of unloading overflow valve.

    分析了单轨吊专用卸荷溢流阀的结构特点和工作原理,着重研究了卸荷溢流阀的自动加载和保压卸荷特性。

    The paper introduces the structural features and working principle of unloading overflow valve for underground locomotives,particularly analyzes its pressurizing and unloading dynamic characteristics.

    介绍井下机车卸荷溢流阀的结构特点和工作原理,着重分析保压和卸荷动态特性。

    The issues of hydraulic system occurred during commissioning have been resolved by means of unloading overflow valve and time delay power supply.

    对钢板剪切线液压系统中典型液压元件和液压控制回路进行原理分析,采用卸荷溢流阀、延时供电等方法解决了调试中液压系统出现的问题。

    pressure regulator of engine unloading valve

    发动机卸荷阀调压器

    The Application of an Unloading Valve for the Billet CCM

    一种卸荷阀在小方坯连铸机上的应用

    Study and Application on Performance Test System of Automobile air Brake Unloading Valve;

    汽车气制动卸荷阀性能测试系统的研究与应用

    Simulation Research on the Dynamicproperty of On-Off Cartridge Valve and the Pressuer Descending Property of Unloading Cartridge Valve

    插装阀动特性与液压机预卸荷插装阀组卸压特性仿真研究

    Remove the relief valve cover bolts while holding the cover down.

    边压住阀盖,边拆卸安全阀阀盖螺栓。

    Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.

    拆卸安全阀阀盖,阀杆/隔膜总成,和安全阀弹簧。

    Remove valve spring and retainer.

    拆卸阀弹簧和扣件。

    Remove TPS from throttle body.

    从节气阀体拆卸TPS

    cargo loading manifold

    货油装卸系统分路阀箱

    Remove check valve and valve seal from booster.

    从倍力器上卸去逆止阀和阀门密封。

    Remove the pressed in relief valve seat and seat O-ring.

    拆卸压进去的安全阀阀座和阀座O形环。

    hydraulic hitch system with unloading function

    卸荷式液压悬挂系统

    balance vane pump

    双作用卸荷式叶片油泵

    ACOUSTIC RESPONSES TO ROCK CORE UNLOADING-DISTURBANCE AND UNLOADING-SENSITIVE ROCK MASS

    岩芯卸荷扰动的声学反应与卸荷敏感岩体

    Remove the cover plate of the relief valve by removing the four connecting screws.

    通过拆卸四个连接螺丝来拆卸安全阀盖板。

    The relief valve should be able to be removed by unscrewing the relief valve from the housing.

    通过从外壳上旋下安全阀应该能够拆卸安全阀。

    Use socket wrench to remove regulator seat for replacement.

    采用套筒扳手来拆卸调节阀阀座进行更换。

    Remove the body bolts from the body using an Allen Key.

    采用内六角扳手从阀体上拆卸阀体螺栓。

Copyright © 2022-2024 汉字大全www.hanzidaquan.com All Rights Reserved 浙ICP备20019715号