The dynamic analysis to the itinerary and volume of piston compressor s cylinder by using PRO/E Mechanism;
基于PRO/E Mechanism的活塞压缩机气缸行程容积动态分析
The paper aims at the problem of movement interfere check for crankguide in piston compressor design,puts forward the method to carry out motion simulation for piston compressor using the Pro/MECHANISM module of Pro/E,and introduces the actual operation process.
针对活塞压缩机设计中的曲柄连杆机构运动干涉检查问题,提出利用Pro/E的机构分析模块Pro/MECHANISM实现其运动仿真,并介绍了具体的操作方法,显示出利用Pro/E软件进行压缩机设计的优势。
It gives the method of setting up the parameterized standard part database by using the family table function of Pro/E,and introduces the actual operation process of setting up the standard part database for piston compressor cylinder flange.
比较了AutoCAD和Pro/E在建立标准件库方面的功能差异的基础上,提出利用Pro/E的族表功能建立参数化标准件库的方法;并以活塞压缩机气缸法兰标准件为例,介绍了具体的操作过程。
Study of pressure between stages calculational methods for pressure between stages of reciprocating compressor under variable operating condition;
活塞压缩机变工况下级间压力计算方法的研究
The overall rule and performance of water-injection internal cooling in the reciprocating compressors was studied when crank angle equals to 180 degrees using the mathematical models in the reference~([1]).
运用文献[1]中建立的数学模型,以内止点喷水为例研究了活塞压缩机喷水内冷却过程的一般规律和性能,分析了喷液直径与喷液量对压缩机耗功、排气温度及吸气量的影响,同时也讨论了喷水内冷却过程中的传热传质性能。
Proceed from thermody namic calculation of the reciprocating compressor,analyze the influence of intake and discharge pressure on reciprocating compressor′s discharge volume and power consuming.
从活塞压缩机热力计算入手,分析吸、排气压力对活塞压缩机排气量及功耗的影响,并通过试验验证理论公式推导的正确性,为进一步提高活塞压缩机的性能提供理论基础及设计依据。
0,and set up a parametric design system of the piston-compressor parts.
0来开发Solidworks,建立一个活塞压缩机零件的参数化建模体系,并通过实例说明具体设计的方法,达到缩短活塞压缩机设计周期的目的。
The motion emulate of the piston-compressor guarantees the rationality and the dependability of the compressor structure from the athletic angle.
活塞压缩机的运动仿真从运动的角度保证了所设计的压缩机结构的合理性和可靠性。
By comparing crankle-framework with the crankshaft-framework of piston-compressor,the article proposes specific theory analysis about crankle and crankshaft under pressure,summarizing the superiority of crankle,providing theory evidence for crankle instead of crankshaft and giving the proof of improving performance of crankle.
通过对活塞压缩机的曲柄轴结构和曲拐轴结构的对比 ,对其受力状况进行了具体的理论分析 ,总结出曲拐结构的优越性 ,为曲拐结构代替曲柄结构所带来的优越性提供理论依据 ,并为进一步提高曲拐性能提供佐证。
Structural Intensity of Piston Compressor
活塞压缩机结构强度
Technique study of hydraulic cylinder Driving Compressor
全液压油缸驱动活塞压缩机技术研究
Measurement and evaluation of mechanical vibration of reciprocating piston compressors
GB/T7777-1987往复活塞压缩机机械振动测量与评价
compression-ignition internal combustion engine ,piston
压缩点火活塞内燃机
free piston diesel compressor
自由活塞内燃压缩机
free piston air compressor
自由活塞空气压缩机
displacement of compressor
压缩机活塞的行程容积
Basic Design of Piston Compressor
活塞式压缩机基础设计
Marine reciprocating air compressor for high pressure
GB/T12929-1991船用高压活塞式空气压缩机
Marine reciprocating air compressor for low pressure
GB/T12933-1991船用低压活塞式空气压缩机
Marine reciprocating air compressor for medium pressure
GB/T12928-1991船用中压活塞式空气压缩机
engine ,compression-igition, internal combustion for aircraft
压缩点火活塞燃机（柴油机或半柴油机）
Analyse and Dispose to Piston Malfunction of D-80/1.5 Gas Compressor
D-80/1.5活塞式煤气压缩机活塞故障分析及处理
Reciprocating piston micro air compressor
GB/T13928-1992微型往复活塞空气压缩机
Reciprocating piston air compressors--Basic parameters
GB/T7787-1987往复活塞空气压缩机基本参数
Marine emergency piston type air compressor
GB/T14359-1993船用应急活塞式空气压缩机
engine ,piston, compression-ignition, for marine propulsion
压缩点火式活塞发动机,船推进用
marine piston type refrigerating compressor unit
船用活塞式制冷压缩机组
