Input pressure effects on the static and dynamic characteristics of hydrodynamic lubrication radial sliding bearing were investigated theoretically.
研究了供油压力对液体动压径向滑动轴承动静特性的影响。
In accordance to the radial pioton hydraulic pump tested requirements,starting with the hydraulic circuit of radial piston hydraulic pump,test hardware and software,taking the radial piston hydraulic pump as the studied object,the paper adopted LabVIEW8.
按照径向柱塞液压泵测试的试验要求,从液压泵试验台液压回路、测试硬件及测试软件入手,以液压柱塞泵为对象,使用LabVIEW 8。
Main causes of leading roller winding,radial run-out,were discussed on both theoretical and practical bases.
从理论和实践两方面阐述了造成辊子弯曲即径向跳动的主要原因,从材料到辊子结构,多方面提出了最佳设计方案。
This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.
径向跳动公差与同轴度公差是形位公差项目中常用的位置公差。
The reason of the radial pulsation of lathe spindle was analyzed.
分析了引起机床主轴径向跳动的原因,通过建立机床主轴径向跳动的数学表达式,研究了主轴径向跳动引起的回转误差在车削和镗削加工中对零件加工精度的影响。
Taking lathe spindle rotary error as an example due to machine spindle pure radial pulsation and pure axial shifting geometric form error of workpiece cross section and the magnitude of subsequent machining error are analyzed.
以车床主轴的回转误差为例，分析了由于主轴的纯径向跳动和纯轴向窜动而造成被加工工件横截面的几何形状误差，以及由此产生的加工误差的大小，得出了这两种误差对加工精度影响的各种结果。
The Design of Hydrodynamic Lubrication Journal Bearing Test Stand s Simulation Software;
液体动压径向滑动轴承实验台仿真软件的研制
Design of Single Oil Wedge Hydrodynamic Lubrication Journal Bearing Based on MATLAB
基于MATLAB的单油楔液体动压径向轴承设计
Analysis of the Dynamic Performance and the Stability of Liquid-lubricated Herringbone Grooved Journal Bearing (HGJB) with Micro-polar Lubricants;
螺旋槽微极性液体润滑径向轴承动力特性与稳定性分析
The pressure distribution was simulated with a approximate method.
采用近似方法模拟径向滑动轴承压力场分布。
Plain bearings-Shaft diameters for unsplit bushes
GB/T10445-1989滑动轴承整体轴套的轴径
An Analysis of a Compliant Multileaf Journal Self-Acting Air Bearing Unite with Active Magnetic Bearing;
磁气混合轴承中弹性箔片径向动压气体轴承的数值分析研究
The Static and Dynamical Research and Simulation of Journal Bearings;
动静载径向滑动轴承特性参数计算及仿真
Study on the influence of initial conditions on the thermal transient behavior of journal bearings
初始状态对径向滑动轴承热瞬态过程的影响
Optimization Design of Hydrodynamic Sliding Bearing Used in Steam Turbine Based on Matlab
基于Matlab的汽轮机流体动压滑动轴承的优化设计
radial bearing upper drive sub
上部径向轴承传动接头
radial bearing lower drive sub
下部径向轴承传动接头
Research on Limit Angle in Maximum Pressure for Radial Sliding Bearing;
向心滑动轴承最大比压处极角φ_0的研究
The stern bearing of ship shaft is cylindrical journal bearing which is often ubricated by oil.
船舶轴系的尾轴承是圆筒形径向滑动轴承，中小型船舶多采用油润滑的方式。
Study on Shape Functions and Optimization Design Theory for Hydrodynamic Journal Bearing
动压径向轴承形状泛函与优化设计理论研究
Performance of new structure inner restrictor compensated hydrody- namic/ hydrostatic journal bearings
新型内部节流形式动静压径向轴承特性研究
Shape Optimization for Hydrodynamic Journal Bearings Based on General Film Thickness Equation
采用通用膜厚方程的动压径向轴承形状优化
Study on the thermal insulation transient process of radial sliding bearing under the turbulence of stepped loading
阶跃载荷扰动下径向滑动轴承绝热瞬态过程研究
Plain bearings--Compression testing of metallic bearing materials
GB/T16748-1997滑动轴承金属轴承材料的压缩试验
