Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
从汽缸体拆下引擎汽缸盖（请参阅本部分之汽缸盖拆卸）。
Remove cylinder head cover, refer to cylinder head cover removal in this section.
拆下汽缸头盖，请参阅本节中的汽缸头盖的拆卸。
Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble).
从汽缸体上卸去曲轴（参看“汽缸体－拆卸”）。
Remove the engine cylinder head bolts.
拆卸引擎汽缸头螺栓。
Remove sensor from cylinder hea
从汽缸盖拆下感知器。
Instrument Panel End Cap Remove/Install
仪表板端盖拆卸/安装
Instrument Panel Top Cover Remove/Install
仪表板上盖的拆卸/安装
Seat Cushion Cover Retaining Clip Removal
座椅垫盖固定螺钉拆卸
Remove timing case cover, refer to timing case cover removal in this section.
拆卸正时箱盖，请参阅本节中的正时箱盖拆卸。
Slide Hydraulic Tappet Remover/Installer Tool C-4129-A through opening in cylinder head and seat tool firmly in the head of tappet.
将液压挺杆拆卸/安装工具C-4129-A滑入汽缸盖开口，在挺杆头内将工具安置牢固。
Remove the cover plate of the relief valve by removing the four connecting screws.
通过拆卸四个连接螺丝来拆卸安全阀盖板。
Remove the relief valve cover bolts while holding the cover down.
边压住阀盖，边拆卸安全阀阀盖螺栓。
Remove the access cover( s) and fold the insulation outward and away from the thermostat( s). Do not remove the plastic cover.
拆卸观察盖板和温控器外部的绝缘保温层。不要拆卸塑料盖。
This procedure is done with the engine cylinder head removed from the block.
程序用来从引擎区拆下引擎汽缸盖。
What should be prepared before disassembly of cylinder for main engine/ auxiliary engine?
在拆卸主机和副机气缸之前应作什么准备工作？
Remove wind deflector, mechanism covers and glass panel.
拆卸挡风板、机械盖和玻璃板。
Remove the differential housing cover and allow fluid to drain.
拆卸差速室盖板并排干油液。
The cover provides a means for servicing the differential without removing the axle.
通过盖可维护差速器，不用拆卸轴。
