This paper probes into the related theory problems of the engineering application of curve gear drive, and explores the related technical conditions which curve gear drive can realize elastic fluid motive power lubrication.
本文探讨了圆弧齿轮传动在工程中应用的有关理论问题，并结合工程实际探索了圆弧齿轮传动满足弹性流体动压润滑的有关技术条件。
A study of the circular arc gear reliability based on improved FOSM method
基于改进一次二阶矩法的圆弧齿轮传动可靠性研究
Through processing super circular arc gear on numerical control machine tool,has explored the technology of numerical control processing about super spare parts,guaranteed the processing precision of spare parts,improved production efficiency and solved the processing problem of super spare parts.
通过在数控机床上加工超大型圆弧齿轮,探索了超大型零件数控加工的工艺,保证了零件的加工精度,提高了生产效率,解决了超大型零件的加工难题,为在数控机床上加工超大型零件提供了有价值的参考。
Based on the fuzzy mathematics and the theory of the reliability design, the mathematics model of the fuzzy reliability design of the circular arc gears is established.
根据模糊数学和可靠性设计理论 ,建立圆弧齿轮传动的模糊可靠性设计的数学模型 ,探讨其计算方法 ,并结合电厂球磨机的传动系统进行具体的模糊可靠性设计。
The arc gear is more superior to the involute gear.
圆弧齿轮较渐开线齿轮有较多的优越性 ,现在已经被很多行业广泛应用。
This method was based on the calculating principle and formula of the arc gear′s driving and measuring common normal line′s distance and made model 67 arc gear as an example.
以圆弧齿轮传动及其测量尺寸公法线长度的计算原理和公式为依据 ,以6 7型单圆弧齿轮为例 ,提出利用牛顿迭代法计算圆弧齿轮公法线的原理、求解方程流程图、迭代方程及编程 ,比手工计算大大降低了工作量 ,而且精度也得到了很好保
To analyze the problem of elastic hydrodynamic lubrication of arc gear and to put forward some more simple and convenient calculation formulas by using modern research achievement in elastic hydrodynamic lubrication.
分析了圆弧齿轮的弹性流体动力润滑问题应用现代弹性流体动力润滑的研究成果，对单圆弧齿轮，提出了简便的弹性流体动力润滑计算公式并给出了算
Mistakes of the Theory to Research Circular-Arc Gear Engagement──On the Disadventages to Create a Couple of Point-Contacting Conjugate Surfaces of Circular-Arc Gear with the Conact-Line Method;
圆弧齿轮啮合原理的误区──简论用接触线法形成圆弧齿轮点接触共轭齿面的弊端
Reserch on double circular-arc gear contact area and contact stress;
双圆弧齿轮的接触区及接触应力的研究
The authors make an investigation into the mechanism of the noise produced by meshing impact of double-circular-arc gears and the principle of dressing these gears, point out that the amount of dressing should be determined by the rigidity of gear teeth, the amount of runin wear and the errors of manufacturing and installing, and introduce a dressing method by means of a hobbing machine.
从理论和实验方面探讨了双圆弧齿轮啮入冲击产生噪声的机理和双圆弧齿轮修形原理。
Amending the Shape of Pinion and Reducing the Round-gear Error;
修正小齿轮表面齿形降低圆弧齿轮传动误差
The Optimum Design of Double-circle Arc Gear Run Based on Genetic Algorithm;
基于遗传算法的双圆弧齿轮传动的优化设计
Calculation and Analysis of Meshing Impact of Double Circular Arc Gear Transmission
双圆弧齿轮传动啮入冲击的计算与分析
Research on Working Capacity of the Double Circular Arc Gear Drive under the Abnormal Working Conditions;
非常规条件下双圆弧齿轮传动工作能力研究
Calculating the Common Normal Line′s Distance of Arc Gear Based on Newton Method;
基于牛顿迭代法计算圆弧齿轮传动公法线长度
ANALYSIS OF ENGAGING GEARS WITH DOUBLECIRCULAR-ARC TOOTH PROFILESⅡ. CORRECTLY ENGAGING CONDITIONS AND PRIMARY RESEARCH OF INTERFERENCE
双圆弧齿轮传动的啮合分析 Ⅱ.正确啮合条件及齿形干涉浅析
The Meshing Characteristic and Finite Element Analysis of Stresses in Double-Arc Helical Gears;
双圆弧齿轮传动的啮合特性及应力的有限元分析
A study of the circular arc gear reliability based on improved FOSM method
基于改进一次二阶矩法的圆弧齿轮传动可靠性研究
VIBRATION ANALYSIS OF A DOUBLE CIRCULAR ARC HELICAL GEARING SYSTEM
双圆弧圆柱齿轮传动系统的振动分析
The Fuzzy Reliability Optimization Design of Arc Teeth Cylinder Gear Drive
圆弧齿圆柱齿轮传动的模糊可靠性优化设计
Optimal Design Analytical Software of the Circular Arc Gear Wheel Transmission
圆柱弧形齿轮传动优化设计分析软件
The meshing characteristics for the driving of the double circular arc vertical and inclined gears
双圆弧直、斜齿轮传动的啮合特性分析
Digital Simulation on Transmission of Loxodrome Normal Circular-arc Bevel Gear;
斜航式法向圆弧锥齿轮传动的数字仿真
Analysis of Influencing of Axis Error on Transmission Precision;
圆弧齿轮轴线误差对传动精度影响的分析
Analysis and Standardization on Transmission of Double-circular-arc-gear Reducer of Pumping Units
抽油机双圆弧齿轮减速器传动分析及标准化
Optimal Design of Harmonic Driver Arc Teeth Based on the Kinematics Geometry;
基于运动几何学的谐波齿轮传动双圆弧齿形优化设计
Driving system consists of gearwheel box, universal couplings and arc-gear synchronous belt.
传动系统采用齿轮箱、万向轴联轴器、圆弧齿同步带相结合。
oval-eccentric gearing
椭圆-偏心齿轮传动
