The early failure of the stopping pad and locking nut of train electironic machine axle is analysized in the present work.
由此得到:构件失效的主要原因是:锁紧螺母的热处理工艺不当,止动垫电镀过程发生氢脆。
The fuel injector cooling system of the Mak 8M453C four-stroke, pulse turbocharger type diesel engine is introduced, and the analysis on the cause of the locking nut crack of the nozzle in fuel injector is given for preventing the problem.
介绍了Mak 8M453C 型四冲程脉冲增压柴油机的喷油器冷却系统的组成,并分析了喷油器喷嘴锁紧螺母裂纹的原因及预防裂纹的措施。
It adopts a new preload structure(FROMO~○[KG-*5/6]R preloadnut).
该装置采用一种新型预紧结构(FROM OR○预紧螺母),通过与剪断销保护装置、端面摩擦保护装置的结构比较及试验数据的分析,表明其摩擦力矩的设定简单而且方便,一致性高,准确性好,并使机构具有良好的重复使用性能。
Flared type tube fittings--Locknut
GB/T5649-1985扩口式管接头锁紧螺母
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
" Prevailing torque type all-metal hexagon nuts, style 1"
GB/T6184-19861型全金属六角锁紧螺母
" Prevailing torque type hexagon nuts (with non-metallic insert), style 2"
GB/T6182-19862型非金属嵌件六角锁紧螺母
" Prevailing torque type hexagon nuts (with non-metallic insert),style 1"
GB/T889-19861型非金属嵌件六角锁紧螺母
Prevailing torque type all-metal hexagon nuts with flange
GB/T6187-1986全金属六角法兰面锁紧螺母
" Prevailing torque type all-metal hexagon nuts, style 2--Property class 9"
GB/T6186-19862型全金属六角锁紧螺母9级
Turn the locking bolt so that it is fixed on the bake cover or the flange plate.
安装后必须将锁紧螺母锁紧在电机后端盖或法兰盘上。
Malleable cast iron pipe fittings--Type size--Backnuts
GB/T3289.30-1982可锻铸铁管路连接件型式尺寸锁紧螺母
" Prevailing torque type all-metal hexagon nuts, style 2--Property classes 5,8, 10 and 12"
"GB/T6185-19862型全金属六角锁紧螺母5,8,10和12级"
Prevailing torque type hexagon nuts with flange (with non-metallic insert)
GB/T6183-1986非金属嵌件六角法兰面锁紧螺母
To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.
要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
Side view of hexagonal jam nut. Selection box height represents thread diameter.
六角锁紧螺母的侧面图。选择框高度代表螺纹直径。
Mechanical properties of fasteners--Prevailing torque type steel hexagon nuts
GB/T3098.9-1993紧固件机械性能有效力矩型钢六角锁紧螺母
spring stop-nut locking fastener
弹簧防松螺母锁紧件
After handle is reinstalled, just tighten up the nuts and washers with force. After gear box is reinstalled, just tighten up the screws and washers with even force.
重新安装把手将螺母及华司用力锁紧即可。重新安装齿轮箱将跟螺丝及华司用力平均锁紧即可。
Nuts are full steel self locking eliminating temperature and moisture influence.
螺母采用全钢制自锁紧式，消除了温度以及湿度的影响。
reverse anchor jam nut
反向锁闭机构紧固螺帽
