Cu-based bearing materials filled with self-lubricating agents including polytetrafluorethylene(PTFE),graphite,lead powder and glass fiber(GF) were prepared.
制备以聚四氟乙烯(PTFE)、石墨、铅粉、玻璃纤维(GF)掺和成自润滑剂的铜基镶嵌式自润滑轴承材料样品,采用立式万能摩擦磨损试验机,在干摩擦条件下考察其摩擦磨损性能,并用三维视频显微镜对摩擦表面进行形貌观察和分析。
The method of selecting stainless bearing material was presented.
概述了高碳铬型不锈轴承钢、高温不锈轴承钢、含氮不锈轴承钢以及特殊用途的不锈轴承材料的研究现状和基本性能。
By manufacturing the test piece of the composite bearings, the 30% glass fiber reinforced Nylon 66 composite for bearing was designed and its injection molding proces was studied.
通过对复合材料轴承的试作制备,设计了轴承用30％短玻纤增强尼龙66复合材料,研究了其注射成型工艺,设计制造了204型复合材料滚动轴承模具,完成了试件制备。
Plain bearings--Compression testing of metallic bearing materials
GB/T16748-1997滑动轴承金属轴承材料的压缩试验
Influence of Temperature on Friction and Wear Properties of Cu-10Sn-10Pb Anti-friction Composite Materials
铜铅轴承材料减摩耐磨性能及其温度的影响
Development of New Sintering Turbocharger Thrust Bearing
新型涡轮增压器烧结止推轴承材料的研制
EHL Lubricating Property Comparison among Emulsion-lubricated Journal Bearing Materials
乳化液润滑轴承材料弹流润滑性能比较研究
Research on Corrosion Behaviors of Fe-Cu Based Oil-retaining Bearings
铜铁基烧结金属含油轴承材料的耐腐蚀性
The stability of bearing materials is of utmost importance to the stability of the gyro.
轴承材料的稳定性对陀螺仪的稳定性是极为重要的。
Preparation and Tribological Performance Research of the Carbon Nanotubes/Lead-base New Sliding Bearing Materials;
碳纳米管/铅基新型滑动轴承材料的制备及其摩擦磨损性能研究
Investigation on Friction and Wear Properties of New-type Inlay Self-lubricating Bearing Materials
新型镶嵌式自润滑轴承材料的摩擦磨损性能研究
Study on Tribological Properties of Adhesive Solid Lubrication Coating of Bimetal Bearing Material
双金属轴承材料表面黏结润滑涂层摩擦学性能研究
With the advancement of warships, new materials and structure of water-lubricating bearings must be investigated.
为了满足舰船日益提高的隐蔽性要求,必须开展水润滑轴承的新型轴承材料和轴承结构研究工作。
Application of Oil-free Lubricating Material to Long Shaft Bearings for Dog Transfer
拨入机长轴轴承无油润滑材料的应用
Study on the Carrying Capacity for Cylindrical Roller Bearings Made of New Materials;
新型材料圆柱滚子轴承承载能力研究
All bearings are rolling bearings and the shafts are made of alloy steel.
轴支承全部采用滚子轴承。轴材料均为合金钢。链条均为强制润滑。
How do engineering materials deform when bearing mechanical loads?
如何做工程材料变形时，轴承机械载荷？
Strengthening and Tougheningresearch on the Material ZG25Mn of Axle-Box Base;
抱轴承箱材料ZG25Mn的强韧化研究
Oil-retaining bearing, friction material,( soft and hard) magnetic element, electronic ceramics, electrical alloy, etc.
◆含油轴承、擦材料、软、）性元件、子陶瓷、工合金等。
These materials are suitable for fabrication of the cage of rolling contact bearings.
这些材料适宜于制造滚动轴承的保持架。
Preparation and Tribological Behavior of a Heavily Loaded 40Cr-PTFE Composite Bearings;
40Cr-PTFE重载复合材料轴承的制备及摩擦磨损特性
