The method of changing main-spindle is used in CNC router and automatic tools changer with tools magazine is used in C NC processing center.
数控镂铣机采用更换主轴头换刀方式;而数控加工中心采用带刀库的自动换刀系统进行换刀。
Replacement and Treatment of the Main Bearing for the Gripper TBM during Driving
支撑式TBM掘进中途的主轴承更换及处理
bearing cone replacing tool
锥形轴承内圈更换工具
Many bearing difficulties can be taken care of by this method of bearing replacement.
许多轴承故障能够通过更换主轴承或轴承来解决。
Replacing the camshaft requires about eight hours; four additional hours are required for replacing camshaft bearings.
更换凸轮轴需要8小时左右;更换凸轮轴轴承需要额外增加4小时。
renew worn tyres, bearings, brake-blocks, etc
更换磨损的轮胎、 轴承、 闸瓦等
Replace the front strut upper mount and bearing
更换前支柱上固定座与轴承
Replacement inside the Tunnel and Failure Analysis of Sealing of TBM Main Bearing
TBM主轴承内密封洞内更换及失效分析
Replacing precision-insert main bearings without removing the crankshaft requires about 5 hours. Removing and replacing the crankshaft requires several additional hours.
不拆曲轴更换精密嵌入型主轴承,大约需要5小时,拆卸和更换轴承要额外增加几小时。
"If the bearings seem to have worn fairly uniformly, then the chances are that only crankshaft-journal checks and bearing replacement will be required."
如果轴承看上去似乎已磨损的相当均匀,那么只需要检查曲轴轴颈并更换轴承。
To perform the complete replacement job on semifinished main bearings requires about 19 to 22 hours.
完成更换半精加工主轴承的工作需要19～20小时
It is not advisable to attempt to replace camshaft bearings unless special removal and installation tools are available.
不要试图更换凸轮轴轴承，除非能够使用特殊的拆卸和安装工具。
Replace crankshaft or grind journals
更换曲轴或磨光轴颈
The hub and bearing assembly does not require removal from the steering knuckle to replace wheel attaching studs in the hub and bearing assembly.
更换轮毂及轴承组件内的车轮固定螺桩无需自转向关节中取出轮毂及轴承组件。
"Valve Service and Maintenance includes installing new seat inserts, cleaning or replacing valve guides, servicing the camshaft and camshaft bearings, and timing the valves."
气门维修包括镶配气门座,清洁或更换气门导管,保养凸轮轴和凸轮轴轴承,气门的正时调整。
Replace cracked case; examine gears and bearings for possible damagAvoid excessive weight on vehicle.
更换断裂的差速箱；检查齿轮和轴承是否损坏。避免车辆过载。
Most modern automotive engines have precision-insert-type. main bearings which can be replaced without removing the crankshaft.
大多数现代汽车发动机的主轴承是精密嵌入型,不必拆下曲轴即可更换。
Thousands of installations demonstrate the reliability and suitability of these simple and effective tools for sand production.
本机具有可更换磨损件，厚壁管和轴，带隔离结构下部轴承和特重负荷齿轮箱。
Replace worn or scored yoke and seal.
更换磨损或划伤的轴轭。
