The method of changing main-spindle is used in CNC router and automatic tools changer with tools magazine is used in C NC processing center.
数控镂铣机采用更换主轴头换刀方式;而数控加工中心采用带刀库的自动换刀系统进行换刀。
automatic headstock changing N/C machine
自动更换主轴箱数控机床
Many bearing difficulties can be taken care of by this method of bearing replacement.
许多轴承故障能够通过更换主轴承或轴承来解决。
The method of changing main-spindle is used in CNC router and automatic tools changer with tools magazine is used in C NC processing center.
数控镂铣机采用更换主轴头换刀方式;而数控加工中心采用带刀库的自动换刀系统进行换刀。
Replacement inside the Tunnel and Failure Analysis of Sealing of TBM Main Bearing
TBM主轴承内密封洞内更换及失效分析
Replace crankshaft or grind journals
更换曲轴或磨光轴颈
Replacing precision-insert main bearings without removing the crankshaft requires about 5 hours. Removing and replacing the crankshaft requires several additional hours.
不拆曲轴更换精密嵌入型主轴承,大约需要5小时,拆卸和更换轴承要额外增加几小时。
To perform the complete replacement job on semifinished main bearings requires about 19 to 22 hours.
完成更换半精加工主轴承的工作需要19～20小时
Replacement and Treatment of the Main Bearing for the Gripper TBM during Driving
支撑式TBM掘进中途的主轴承更换及处理
bearing cone replacing tool
锥形轴承内圈更换工具
Replace worn or scored yoke and seal.
更换磨损或划伤的轴轭。
Replacing the camshaft requires about eight hours; four additional hours are required for replacing camshaft bearings.
更换凸轮轴需要8小时左右;更换凸轮轴轴承需要额外增加4小时。
Most modern automotive engines have precision-insert-type. main bearings which can be replaced without removing the crankshaft.
大多数现代汽车发动机的主轴承是精密嵌入型,不必拆下曲轴即可更换。
renew worn tyres, bearings, brake-blocks, etc
更换磨损的轮胎、 轴承、 闸瓦等
Replace the front strut upper mount and bearing
更换前支柱上固定座与轴承
Discussion on the replacement of the ESP ceramic shaft in operation method
运行中更换电除尘器瓷转轴方法探讨
REPLACE HE BODY CONTROL MODUL
更换主体控制模组。＊
REPAIR AS NECESSARY, REPLACE THE ABS MAIN FUSE.
必要的话，更换ＡＢＳ主熔丝。＊
The Automatic Switching Between the Main Spindle and C Axis of the Vertical Turning and Milling MC
立式车铣加工中心主轴与C轴的自动切换控制
