This paper introduces and analyzes the applicability and service con dition of the thickening torque nut in the coal road's compound roof and broken roof, the results show that the application of the thickening torque nut in the coal road full bolding solves successfully the problem of the difficult erection of the bolts in fully anchored coal road.
介绍并分析了加厚型扭矩螺母在煤巷复合顶板、破碎顶板下的适应性和使用情况,结果表明:加厚型扭矩螺母在全锚杆巷道支护中的使用,成功地解决了全锚巷道锚杆安装工序繁琐的难题,锚杆支护实现了注锚一体化,有效地提高了掘进单进水平,为矿井的高产高效创造了有利条件。
Popularization and Application of Thickening Torque Nut in the Coal Road Full Bolding
加厚型扭矩螺母在煤巷全锚杆巷道的推广使用
all-metal prevailing torque type nuts
金属预置扭矩式螺帽
a hand tool that is used to hold or twist a nut or bolt.
用来上紧或扭螺母或螺栓的手工具。
Torque Test of Thread Fastener for Automotive Braking Pipe Line
汽车制动管路螺纹紧固件的扭矩试验
NC machining nut with large lead and 3-start rectangular thread
大导程三头矩形螺纹螺母的数控加工
1~10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
GB/T3098.13-1996紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径
Comparison Between Torque Method and Angle Method in Bolt Assembly Technology
螺栓装配技术中扭矩法与转角法比较研究
Study on factors to influence torque strength of anaerobic thread-locking adhesives for automobiles
汽车用厌氧螺纹锁固胶扭矩的影响因素研究
static torque calibuation stand
转矩[扭矩] 静校台
Measurement and Study on Screw Torque and Axial Thrust of Twin Screw Pulping Extruder
双螺杆磨浆机螺杆扭矩和轴向推力的测量与研究
Replace body bolts and torque evenly to70 ft./ lbs.
重新放置阀体螺栓，并且用70英尺/的扭矩均匀的旋紧。
Replace body bolts and torque evenly to 70 ft./lbs.
重新放置阀体螺栓，并且用70英尺/磅的扭矩均匀的旋紧。
Torque-Add-Angle Control Approach Study for Bolt-Joints of Automotive Key Components;
汽车关键零部件螺纹联接的扭矩加转角控制方法研究
Analysis and Research on Fixed Torque Bolt Joint Function Based on RE;
基于反求工程的定扭矩螺栓联接功能分析与研究
Regression Analysis of Relationship Between Axial Force and Torque of High-strength Bolt Connecting Steel Structure for Boiler Based on Experiment Data
基于试验数据的锅炉钢结构高强度螺栓轴力与扭矩关系回归分析
Impact Analysis of Make-up Torque of Drill Connecting Thread Based on 3-D Finite Element Model
基于三维有限元模型的钻具连接螺纹上扣扭矩影响分析
The state of being twisted into a spiral;torsional stress or strain.
螺旋状，扭力扭成螺旋状；扭转的压力或张力
After proper operation has been verified, tighten all bolts using the crossover method. Recommended tightening torques pattern is listed below.
在检验操作能够正常进行后，在采用交叉法紧固所有螺栓。推荐的紧固扭矩模式如下所示。
