Starting from the valve structure relative to valve axial dimension, the structure, theory, adjusting method, operating method and characteristic for the special comparer which can be used for inspecting multiple axial parameters of engine valve in time are introduced in detail on the basis of the precondition of the unification between measuring benchmark and designing benchmark.
从与气门轴向尺寸有关的气门结构特点入手,介绍了有关在测量基准与设计基准统一的前提下可同时进行气门多个轴向尺寸测量的专用检具的结构原理、调节方法、使用方法等。
Process main, journal mouth, shoulder platform and crankshaft whose axial size needs more precision using the lathe of numerical control—CAK6150P.
利用CAK6150P数控车床加工主轴颈当口、肩台、轴向尺寸精度较高的曲轴。
Analysis the producing ways of axial clearance of bent axises on X195 diesel;
保证X195柴油机曲轴总成轴向间隙几种生产方式的讨论
The method of eliminating axial clearance,logical fixing configuration and effective guard of ballscrew nut pair are all introduced in this paper.
介绍滚珠丝杆螺母副轴向间隙的消除方法、合理的安装结构和有效的防护装置。
It was found that these faults were attributed to(1) the excess axial clearance of the rolls at the bearing seat,and(2) the excess bouncing resulting from the unbalanced force applied to the rubber mat of the rolls.
经分析,原因是轧辊非传动端轴承座装配的轴向间隙过大,且螺纹公差偏大,所以造成轧辊窜动严重以及原用胶垫受力不均衡,弹跳过大。
Study on axial length changing and its controlling during heat treatment of 440C steel tube
440C钢管热处理轴向尺寸变化规律与工艺控制
This method is effictive to control muffler attenuation of the muffler structure which is Axis symmetry.
这一方法对控制以轴向尺寸为主的消声结构的消声低谷非常有效。
End-suction centrifugal pumps--Baseplate and installation dimensions
GB/T5660-1985轴向吸入离心泵底座尺寸和安装尺寸
" Spherical plain radial bearings, joint type-Boundary dimensions"
GB/T9163-1990向心关节轴承外形尺寸
Radial ball bearings with flanged outer ring--Flange dimensions
GB/T7217-1987凸缘外圈向心球轴承凸缘尺寸
Rolling bearings Radial bearings-Boundary dimensions
GB/T273.3-1988滚动轴承向心轴承外形尺寸方案
" GEC...FSA type maintenance-free spherical plain radial bearings, joint type-Boundary dimensions"
GB/T4646-1991GEC...FSA型自润滑向心关节轴承外形尺寸
" End-suction centrifugal pumps (rating 16 bar)--Designation, nominal duty point and dimensions"
GB/T5662-1985轴向吸入离心泵(16bar)标记、性能和尺寸
Rolling bearings--Miniature radial ball bearings with flanged outer ring Boundary dimensions
GB/T7218-1995滚动轴承凸缘外圈微型向心球轴承外形尺寸
Crankshaft Journal Size Paint Location
曲轴颈部尺寸标记位置
Undersize crankshaft main bearing journals.
尺寸小于标准的凸轮轴主轴承轴颈。
" Synchronizing universal coupling with ball and socket--Type, foundational parameters and main dimensions"
GB/T7549-1987球笼式同步万向联轴器型式、基本参数和主要尺寸
Measurement of the dimensions of a cylindrical component having two axial terminations
GB/T5076-1985具有两个轴向引出端的圆柱体元件的尺寸测量
End-suction centrifugal pumps--Dimensions of cavities for mechanical seals and for soft packing
GB/T5661-1985轴向吸入离心泵机械密封和软填料用的空腔尺寸
Rolling bearings--Single-row radial ball bearings with felt seals--Types and basic dimensions
GB/T280-1964带毡封圈的单列向心球轴承结构型式和基本尺寸
Rolling bearings--Double -row radial spherical roller bearings--Types and basic dimensions
GB/T286-1964双列向心球面滚子轴承结构型式和基本尺寸
Research on the formation of dimensional chain when thread hob rolls thread by axial intake on doubleroller machine;
双滚柱机床螺纹滚头轴向进给滚压螺纹时形成尺寸链的分析
Evolution and axial distribution of Ar clusters in supersonic jets
超声喷流Ar团簇生长演化过程及团簇尺寸轴向分布的实验研究
