您的位置:汉字大全 > 行业英语 > 机械 > pivot pin locknut是什么意思

pivot pin locknut是什么意思

中文翻译轴销防松螺母

网络释义

1)pivot pin locknut,轴销防松螺母2)anchor pin locknut,锚定销防松螺母3)anchor pin lock nut,锁销防松螺母4)locknut,防松螺母5)Nut loose check,螺母防松6)lock nut,防松螺母

用法例句

    The Science and Education Bureau of the Ministry of Railways has set up the ST 2 type locknuts as the Railway Standard "Thread Varying Locknuts", which will be issued and in application within the year.

    铁道部科教司已将 ST2 型防松螺母制定为铁标“变牙型防松螺母”,年内将颁布实施。

    Research on repetitve use of Fe-based shape memory alloy lock nut;

    铁基形状记忆合金防松螺母重复使用性能研究

    This paper analyses the fundamental principle of Fe-based SMA lock nut.

    介绍铁基形状记忆合金防松螺母防松的基本原理,然后借助试验,对比测试防松螺母和普通螺母的自锁摩擦力矩与动态防松寿命。

    spring stop-nut locking fastener

    弹簧防松螺母锁紧件

    Install adjuster nut and lock nut.

    安装调节器螺母和防松螺母

    A usually thin nut screwed down on another nut to prevent it from loosening.

    防松螺母常指拧紧在另一个螺母上的防止其松动的细螺母

    The accident was due to the action of acid o the check nut.

    事故是由于酸对防松螺母的作用而发生的。

    Recheck clearance on all valves again after locknut is tightened.

    防松螺母拧紧后,再对所有气门的间隙重新检查一次。

    a supplementary nut that is screwed down on a primary nut to prevent it from loosening.

    旋在主要螺母外防止其松动的辅助螺母。

    SLN self-locking nuts

    SLN自动防松螺帽

    Double Nuts Anti-loosening link Assembly Screwing down Process Theoretic Analysis

    双螺母防松时螺栓联接装配拧紧工艺的初步理论分析

    To Readjust- Loosen lock nut on the adjusting screw.

    重新调节:松开调节螺丝上的锁定螺母。

    lock nut of iron or stee

    锁紧螺帽,防松螺帽,铁或钢制

    Bolts and nuts are plated for corrosion resistance.

    螺栓和螺母经过电镀防腐蚀处理。

    Tighten locknut 1 to fix the thread stand.

    拧紧固定螺母1不让线架装置松动。

    The Research of Technology to Prevent from Looseness and Method of Testing for Thread Fastener;

    螺纹紧固件防松技术和试验方法研究

    Loosen setscrew 1 in the oil shield plate, and remove oil shield plate 2.

    请拧松防油板固定螺丝1 ,然后卸下防油板2。

    Treatment of soft copper strip burning out due to transformer bolt loosening

    变压器低压桩螺母松动引起软铜带烧断的处理

    To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.

    要更换阀座/杆模块,先关闭供应管道,松开锁紧螺母,退出调节螺丝。

    Clerk: It seems there are some loose bolts on one of the wings. It happens all the time. No need to worry.

    一个机翼上的几个螺母松了。这样的事常发生,不必担心。

    (2)adopting barb thread design to improve the tensile- and compression-strength and to prevent unscrewing of the casing;

    ②采用倒钩螺纹设计 ,提高了螺纹的抗拉和抗内外压能力 ,可防止套管倒扣松动 ;

Copyright © 2022-2024 汉字大全www.hanzidaquan.com All Rights Reserved 浙ICP备20019715号