The processing technology and necessarily of surface modification for cast aluminum alloy are presented.
主要对表面合金化技术、表面敷层和电子束改性等技术应用于铸造铝合金表面改性进行总结。
The melting process and heat treatment cycle of the cast aluminum alloy containing element Scandium were determined.
试验了含钪铸造铝合金的熔炼工艺和热处理工艺,分析了合金的化学成分,观察了合金的金相组织,测试了合金的力学性能。
Electron beam modification process were used on the surfaces of cast aluminum alloy samples with various alloying elements.
利用电子束技术对添加不同合金化元素的铸造铝合金试样表面进行电子束改性试验研究。
This paper discusses the molybdenum blue spectrophotometer method to determine high silicon content in casting aluminum alloys by reducing the quantity of samples and relative silicon content.
探讨了铸造铝合金中高硅的钼蓝光度分析方法,通过采取减少试样引入量、减少硅的相对含量等方式,使 方法得以适用;提出了方法的最佳分析条件,从而使分析的结果在国家标准的误差范围之内。
The effects of solid solution treatment and ageing on the mechanical properties and corrosion resistance of a new corrosion resistant casting aluminum alloy were introduced.
主要介绍了不同的固溶和时效处理制度对新型耐蚀铸造铝合金力学性能、耐蚀性能的影响 ,通过对金相组织观 察和能谱分析 ,结合相图进行了讨论 ,指出 Mg2 Si相的充分固溶和均匀析出是决定 Al- 2 Mg- 3Si合金综合性能的关键因素 ,并根据材料实际应用情况最终确定了该新型耐蚀铸铝的热处理制度。
Through the improvement of traditional coloring technologies, a coloring technology for casting aluminum alloy to obtain a reddish brown color film was developed.
研究了着色液中 Cu Cl2 含量、着色时间等因素对铸造铝合金 ZL 1 0 5表面着赭红色效果的影响 ,并考察了膜的耐腐蚀性能。
Development and Progress in New Marine Cast Aluminium Alloy;
船用新型铸造铝合金的研究
Ni-Cr powder was mixed into paste with a organic binding agent and then painted onto the surface of cast aluminium alloy ZL108 for laser surface alloying using CO2 laser.
将Ni-Cr合金粉末用有机粘接剂调成膏状涂在铸造铝合金ZL108基体上,然后采用CO2激光进行激光表面合金化处理。
It was studied that the technology conditions of microarc oxidation of ZL109 higher-silicon cast aluminium alloys and the structure,the micrograph and property of surface,the conditions of microarc oxidation ceramic coating.
研究了ZL109高硅铸造铝合金微弧氧化的工艺条件及氧化陶瓷膜的结构、表面显微形貌和性能。
It was studied that the technology conditions of microarc oxidation of ZL109 higher-silicon cast aluminium alloys and the structure, the micrograph of surface, the conditions of microarc oxidation ceramic coating.
研究了ZL109高硅铸造铝合金微弧氧化的工艺条件及陶瓷氧化膜的结构、表面显微形貌和性能。
Two cast aluminum alloys were tested and research with natural environmental test methods.
选用2种铝合金材料(ZL114B、ZL102A)在铸造状态下通过自然 环境试验研究,得出铸造铝合金材料在不同防护方式和不同环境条 件下其性能变化结果。
Aluminium alloy ingots for casting
GB/T8733-1988铸造铝合金锭
Improvement of Strength and Toughness of Casting Aluminium Alloy ZL107 with Minim Alloy Element;
ZL107铸造铝合金的微量合金强韧化
Simulation of Casting Stress of Low-pressure Casting Aluminum Alloy Wheel
低压铸造铝合金轮毂铸造应力的数值模拟
Research on Aluminum Alloy and High Chromium Cast Iron Prepared by Solid-Liquid Mixed Casting Process
固液混合铸造铝合金和高铬铸铁的研究
Investigation on Technology of Micro-Arc Oxidationon the Surface of ZL201 Aluminum Casting Alloy;
ZL201铸造铝合金微弧氧化工艺研究
Molybdenum Blue Spectrophotometer Method in the Determination of Silicon Content;
铸造铝合金中硅的分光光度分析方法
Nondestructive Evaluation of Pinhole Defect of Cast Aluminum Alloy by Ultrasonic Method
铸造铝合金针孔缺陷的超声无损评价
Investigation of Fatigue Crack Deflection for A357 Casting Aluminium Alloy
A357铸造铝合金疲劳裂纹偏折研究
Research Progress on Oxide Inclusions in Cast Aluminum Alloys
铸造铝合金中氧化夹杂物的研究进展
The properties and application of high strength ZL205A casting aluminum alloy
ZL205A高强铸造铝合金的性能及应用
Study on aging temperature of ZL210A casting aluminum alloy
ZL210A铸造铝合金热处理时效温度的研究
Fatigue properties study of A357-T6 casting aluminum alloy
A357-T6铸造铝合金疲劳特性研究
The new phase of the application of cast aluminum alloys--The production of premium castings
铸造铝合金应用的新阶段——优质铸件的生产
Aluminium-silicon alloy ingots for casting
GB/T8734-1988铸造铝硅合金锭
cast Alnico hard magnetic alloys
铸造铝镍钴硬磁合金
Casting defects analyzing and prevention of aluminum alloy cast by traveling magnetic field
铝合金铸件移动磁场铸造的铸造缺陷及防止
The Study of Cast Aluminum Alloy Composite with Alumina Short Fibers
铸造氧化铝短纤维增强铝合金复合材料的研究
Good knowledge of alum and grey iron casting and machining processes.
熟悉铝合金和灰铁铸造和加工流程。
