Emphasis focuses on the yield strength and hardening modulus of the thin film.
本文研究用平头压痕试验确定薄膜 基体材料中薄膜材料弹塑性参数的可行性 ,重点研究了薄膜材料的屈服强度和硬化模量的确定方法。
The hard segment content may be controlled by changing the ratioof PPG600 to PPG2000.
以PPG600和PPG2000混合聚醚、异佛尔酮二异氰酸酯(IPDI)和异佛尔酮二胺(IPDA)为原料合成溶剂型聚氨酯脲(PUU)树脂,通过改变PPG600和PPG2000配比调节树脂硬段含量。
Application of image processing in hardness measurement of welded joint;
实验结果表明,即使在简易实验设备条件下,通过图像处理技术的辅助,可以极大地提高硬度测量的精度和工作效率。
MORPHOLOGY AND MECHANICAL PROPERTIES OF ALIPHATIC POLYUREA WITH DIFFERENT HARD SEGMENT CONTENTS
不同硬段含量脂肪族聚脲的结构与性能研究
The more carBon the steel contains, the harder it Becomes.
钢的含碳量和钢的硬度成正比。
The high chrome content (9%) provides very high hardenability.
高铬含量（9%）能够提供很高的硬化性。
Effect of Tin Content on Hardness of Machined Surfaces of Gray Iron Castings
Sn含量对灰铸铁件加工面硬度的影响
Using GPR to Measure Soil Moisture Content
利用低频微波波段GPR测量土壤含水量
Effects of contents of water and binder on the strength of Hard Alloy green compacts
含水量和粘结剂含量对硬质合金粉末压坯强度的影响
An Investigation into Fe,Mn Contents in Longjiang River in Yizhou County in 2006;
2006年龙江河宜州段铁锰含量的调查
Distribution of Cd in sediments from Xiawan drainage area of the Xiang River
湘江霞湾港段底泥的含镉量分布研究
Effect of Hard Segment Structure on Polyurethane Shape Memory Effect with Hydrophilic Group in the Chain
硬段结构对分子链含亲水基团的聚氨酯形状记忆性能的影响
iron having a low carbon content that is tough and malleable and so can be forged and welded.
碳含量低的铁，硬且有延展性，可以锻造和焊接。
The Effect of Carbon Content ob the Hardness and Toughness of Low-Chromium Wear-resistant Cast Steel
碳含量对低铬抗磨铸钢硬度和韧性的影响
The Research on Carbon Content Control in Preparation of Superfine Cemented Carbide;
亚微米硬质合金制备过程中碳含量的控制研究
Determining Amine Value of PB-9M by A Voltametric Titrater;
电位滴定法测定PB-9M中硬脂酰二乙醇胺含量
Effect of Molybdenum Addition on the Microstructure and Mechanical Properties of Cemented Carbides
钼含量对硬质合金组织和力学性能的影响
Detection of Cadmium in Medical Gelatin Hard Capsule Shells in Guangzhou City
广州市药用明胶硬胶囊壳中镉含量的检测
Effect of carbon content on microstructure and properties of cemented carbide with iron and nickel-based bonders
碳含量对铁镍代钴硬质合金组织和性能的影响
Effect of Ti content and ageing on microstructure and hardness of 00Cr12Ni9Mo4Cu maraging stainless steel
Ti含量及时效工艺对00Cr12Ni9Mo4Cu合金组织和硬度的影响
Determination of zidovudine stearate content in its liposomes
齐多夫定硬脂酸酯脂质体中药物含量的测定
