Correlation between welding slag and usability quality of stainless steel electrode;
不锈钢焊条焊接熔渣及与焊条工艺质量的关系
The electroslay welds were found to have a lower level of fracture toughness than implied from qualification tests.
人们发现电渣焊缝的断裂韧性较鉴定试验所给的结果要低。
Application of Electro Slag Welding with Consumable Nozzle in the Vertical Welding of Blast Furnace Shell in Laigang
熔嘴电渣焊在莱钢高炉炉壳立缝焊接中的应用
Close examination of the plug welds showed the existence of herringbone patterns near the slag and voids in welds.
对塞焊焊缝的详细检查表明在焊渣及气孔附近，焊缝中存在着人字型裂纹。
Longitudinal electric resistance welded steel tubes
GB/T13793-1992直缝电焊钢管
Arc strikes outside of the welds were avoided.
焊缝外要避免电弧穿刺。
Any severe deficiency of welding seams surface like cracks, pores, slags is forbidden.
焊缝表面不得有裂纹,气孔,夹渣等严重缺陷.
The box corner welds were made with E70 electrodes.
箱型梁内角部焊缝所用的电焊条为E70。
Automatical EB Welding of Curved Weldment
工件平面曲线焊缝的电子束自动焊接
Application of the electrogas welding for the blast furnace jacket
气电立焊在高炉炉壳立缝焊接的应用
Fundamental study on hybrid laser beam and resistance seam welding (LB-RSW)
激光束—电阻缝焊(LB-RSW)复合焊接研究
The study of the control circuit of type ZDH-36 electric dreg pressure welder;
ZDH-36型电渣压力焊机控制电路的研究
Research on Welding Seam Formation Characteristics of Manual Arc Welding and CO_2 Gas Protection Welding
手工电弧焊与CO_2气体保护焊焊缝成形特征研究
Influence Factors of the Welding Quality of Electroslag Pressure Welding for Three Grade Steel Bar
三级钢筋电渣压力焊焊接品质的影响因素
APPLICATION OF CONSUMABLE GUIDE ELECTROSLAG WELDING TO PRESSURE VESSEL FABRICATION
熔嘴电渣焊在高压容器制造中的应用
Study on Elextro-slag Pressure Welding Equipment of vertical Reinforced Bar…
竖向钢筋电渣压力焊研究——设备部分
Application of Electroslag Pressure Welding of Vertical Reinforcing Steel Bar in Engineering;
竖向钢筋电渣压力焊在工程中的应用
Development of Electroslag Welding Base on PLC
基于PLC的电渣焊控制系统的研制
Thus the fracture likely initiated from fatigue sharpened cracks originating from slag and void in the plug welds.
因此，断裂可能是由于从塞焊焊缝内的焊渣和气孔外形成的尖锐的疲劳裂纹而产生的。
